Ayusman Sen

Bio: Ayusman Sen is an academic researcher from Pennsylvania State University. The author has contributed to research in topics: Catalysis & Palladium. The author has an hindex of 84, co-authored 431 publications receiving 25287 citations. Previous affiliations of Ayusman Sen include University of Pennsylvania & Gas Technology Institute.

Catalytic Nanomotors: Autonomous Movement of Striped Nanorods

Abstract: Rod-shaped particles, 370 nm in diameter and consisting of 1 μm long Pt and Au segments, move autonomously in aqueous hydrogen peroxide solutions by catalyzing the formation of oxygen at the Pt end. In 2−3% hydrogen peroxide solution, these rods move predominantly along their axis in the direction of the Pt end at speeds of up to 10 body lengths per second. The dimensions of the rods and their speeds are similar to those of multiflagellar bacteria. The force along the rod axis, which is on the order of 10-14 N, is generated by the oxygen concentration gradient, which in turn produces an interfacial tension force that balances the drag force at steady state. By solving the convection-diffusion equation in the frame of the moving rod, it was found that the interfacial tension force scales approximately as SR2γ/μDL, where S is the area-normalized oxygen evolution rate, γ is the liquid−vapor interfacial tension, R is the rod radius, μ is the viscosity, D is the diffusion coefficient of oxygen, and L is the le...

Catalysis Research of Relevance to Carbon Management: Progress, Challenges, and Opportunities

Abstract: There is increased recognition by the world’s scientific, industrial, and political communities that the concentrations of greenhouse gases in the earth’s atmosphere, particularly CO_2, are increasing. For example, recent studies of Antarctic ice cores to depths of over 3600 m, spanning over 420 000 years, indicate an 80 ppm increase in atmospheric CO_2 in the past 200 years (with most of this increase occurring in the past 50 years) compared to the previous 80 ppm increase that required 10 000 years.2 The 160 nation Framework Convention for Climate Change (FCCC) in Kyoto focused world attention on possible links between CO2 and future climate change and active discussion of these issues continues.3 In the United States, the PCAST report4 “Federal Energy Research and Development for the Challenges of the Twenty First Century” focused attention on the growing worldwide demand for energy and the need to move away from current fossil fuel utilization. According to the U.S. DOE Energy Information Administration,5 carbon emission from the transportation (air, ground, sea), industrial (heavy manufacturing, agriculture, construction, mining, chemicals, petroleum), buildings (internal heating, cooling, lighting), and electrical (power generation) sectors of the World economy amounted to ca. 1823 million metric tons (MMT) in 1990, with an estimated increase to 2466 MMT in 2008-2012 (Table 1).

Silver Bromide Nanoparticle/Polymer Composites: Dual Action Tunable Antimicrobial Materials

Abstract: We present a simple method of fabricating highly potent dual action antibacterial composites consisting of a cationic polymer matrix and embedded silver bromide nanoparticles. A simple and novel technique of on-site precipitation of AgBr was used to synthesize the polymer/nanoparticle composites. The synthesized composites have potent antibacterial activity toward both gram-positive and gram-negative bacteria. The materials form good coatings on surfaces and kill both airborne and waterborne bacteria. Surfaces coated with these composites resist biofilm formation. These composites are different from other silver-containing antibacterial materials both in the ease of synthesis and in the use of a silver salt nanoparticle instead of elemental silver or complex silver compounds. We also demonstrate the ability to tune the release of biocidal Ag+ ions from these composites by controlling the size of the embedded AgBr nanoparticles. These composites are potentially useful as antimicrobial coatings in a wide va...

Cluster-Assembled Materials

Abstract: Cluster-assembled materials offer the ability to tune component properties, lattice parameters, and thus coupling of physical properties through the careful selection and assembly of building blocks. Multi-atom clusters have been found to exhibit physical properties beyond those available from the standard elements in the periodic table; classification of the properties of such clusters effectively enables expansion of the periodic table to a third dimension. Using clusters as superatomic building blocks for hierarchically assembled materials allows these properties to be incorporated into designer materials with tailored properties. Cluster-assembled materials are currently being explored and methods developed to control their design and function. Here, we discuss examples of building block syntheses, assembly strategies, and property control achieved to date.

疟原虫var基因转换速率变化导致抗原变异[英]／Paul H, Robert P, Christodoulou Z, et al//Proc Natl Acad Sci U S A

Abstract: 抗原变异可使得多种致病微生物易于逃避宿主免疫应答。表达在感染红细胞表面的恶性疟原虫红细胞表面蛋白1（PfPMP1）与感染红细胞、内皮细胞、树突状细胞以及胎盘的单个或多个受体作用，在黏附及免疫逃避中起关键的作用。每个单倍体基因组var基因家族编码约60种成员，通过启动转录不同的var基因变异体为抗原变异提供了分子基础。

Palladium-Catalyzed Ligand-Directed C−H Functionalization Reactions

Abstract: 1.1 Introduction to Pd-catalyzed directed C–H functionalization The development of methods for the direct conversion of carbon–hydrogen bonds into carbon-oxygen, carbon-halogen, carbon-nitrogen, carbon-sulfur, and carbon-carbon bonds remains a critical challenge in organic chemistry. Mild and selective transformations of this type will undoubtedly find widespread application across the chemical field, including in the synthesis of pharmaceuticals, natural products, agrochemicals, polymers, and feedstock commodity chemicals. Traditional approaches for the formation of such functional groups rely on pre-functionalized starting materials for both reactivity and selectivity. However, the requirement for installing a functional group prior to the desired C–O, C–X, C–N, C–S, or C–C bond adds costly chemical steps to the overall construction of a molecule. As such, circumventing this issue will not only improve atom economy but also increase the overall efficiency of multi-step synthetic sequences. Direct C–H bond functionalization reactions are limited by two fundamental challenges: (i) the inert nature of most carbon-hydrogen bonds and (ii) the requirement to control site selectivity in molecules that contain diverse C–H groups. A multitude of studies have addressed the first challenge by demonstrating that transition metals can react with C–H bonds to produce C–M bonds in a process known as “C–H activation”.1 The resulting C–M bonds are far more reactive than their C–H counterparts, and in many cases they can be converted to new functional groups under mild conditions. The second major challenge is achieving selective functionalization of a single C–H bond within a complex molecule. While several different strategies have been employed to address this issue, the most common (and the subject of the current review) involves the use of substrates that contain coordinating ligands. These ligands (often termed “directing groups”) bind to the metal center and selectively deliver the catalyst to a proximal C–H bond. Many different transition metals, including Ru, Rh, Pt, and Pd, undergo stoichiometric ligand-directed C–H activation reactions (also known as cyclometalation).2,3 Furthermore, over the past 15 years, a variety of catalytic carbon-carbon bond-forming processes have been developed that involve cyclometalation as a key step.1b–d,4 The current review will focus specifically on ligand-directed C–H functionalization reactions catalyzed by palladium. Palladium complexes are particularly attractive catalysts for such transformations for several reasons. First, ligand-directed C–H functionalization at Pd centers can be used to install many different types of bonds, including carbon-oxygen, carbon-halogen, carbon-nitrogen, carbon-sulfur, and carbon-carbon linkages. Few other catalysts allow such diverse bond constructions,5,6,7 and this versatility is predominantly the result of two key features: (i) the compatibility of many PdII catalysts with oxidants and (ii) the ability to selectively functionalize cyclopalladated intermediates. Second, palladium participates in cyclometalation with a wide variety of directing groups, and, unlike many other transition metals, promotes C–H activation at both sp2 and sp3 C–H sites. Finally, the vast majority of Pd-catalyzed directed C–H functionalization reactions can be performed in the presence of ambient air and moisture, making them exceptionally practical for applications in organic synthesis. While several accounts have described recent advances, this is the first comprehensive review encompassing the large body of work in this field over the past 5 years (2004–2009). Both synthetic applications and mechanistic aspects of these transformations are discussed where appropriate, and the review is organized on the basis of the type of bond being formed.

The Catalytic Valorization of Lignin for the Production of Renewable Chemicals

Abstract: Biomass is an important feedstock for the renewable production of fuels, chemicals, and energy. As of 2005, over 3% of the total energy consumption in the United States was supplied by biomass, and it recently surpassed hydroelectric energy as the largest domestic source of renewable energy. Similarly, the European Union received 66.1% of its renewable energy from biomass, which thus surpassed the total combined contribution from hydropower, wind power, geothermal energy, and solar power. In addition to energy, the production of chemicals from biomass is also essential; indeed, the only renewable source of liquid transportation fuels is currently obtained from biomass.