Azman Hassan

Bio: Azman Hassan is an academic researcher from Universiti Teknologi Malaysia. The author has contributed to research in topics: Ultimate tensile strength & Flexural strength. The author has an hindex of 44, co-authored 309 publications receiving 7560 citations. Previous affiliations of Azman Hassan include University of Kufa & Peninsular Malaysia.

Effect of jute fibre loading on tensile and dynamic mechanical properties of oil palm epoxy composites

Abstract: Hybrid composites prepared by hand lay-up technique by reinforcing jute and oil palm fibres with epoxy matrix. The tensile properties of hybrid composites were found to increase substantially with increasing jute fibres loading as compared to oil palm–epoxy composite. The nature of fibre/matrix interface was examined through scanning electron microscopy of tensile fracture samples. Addition of jute fibres to oil palm composite increases the storage modulus while damping factor shifts towards higher temperature region. Cole–Cole analysis was made to understand the phase behaviour of the composite samples. The hybrid composite with oil palm:jute (1:4) showed maximum damping behaviour and highest tensile properties. The overall use of hybrid system was found to be effective in increasing tensile and dynamic mechanical properties of the oil palm–epoxy composite probably due to the enhanced fibre/matrix interface bonding. The potential applications of the oil palm based hybrid composites in automobiles and building industry are going to increase in near future.

Recent advances in epoxy resin, natural fiber-reinforced epoxy composites and their applications

Abstract: The versatile characteristic of epoxy and its diversity made it suitable for different industrial applications such as laminated circuit board, electronic component encapsulations, surface coatings, potting, fiber reinforcement, and adhesives. However, the pervasive applications in many high-performance field limited the epoxy use because of their delamination, low impact resistance, inherent brittleness, and fracture toughness behavior. The limitations of epoxy can be overcome by incorporation and modification before their industrial applications. Currently, modified epoxy resins are extensively used in fabrication of natural fiber-reinforced composites and in making its different industrial products because of their superior mechanical, thermal, and electrical properties. Present review article designed to be a comprehensive source of recent literature on epoxy structure, synthesis, modified epoxy, bio-epoxy resin, and its applications. This review article also aims to cover the recent advances in natur...

Comparison of Polylactic Acid/Kenaf and Polylactic Acid/Rise Husk Composites: The Influence of the Natural Fibers on the Mechanical, Thermal and Biodegradability Properties

Abstract: This paper investigates and compares the performances of polylactic acid (PLA)/kenaf (PLA-K) and PLA/rice husk (PLA-RH) composites in terms of biodegradability, mechanical and thermal properties. Composites with natural fiber weight content of 20% with fiber sizes of less than 100 μm were produced for testing and characterization. A twin-screw extrusion was used to compound PLA and natural fibers, and extruded composites were injection molded to test samples. Flexural and Izod impact test, TGA, soil burial test and SEM were used to investigate properties. All results were compared to a pure PLA matrix sample. The flexural modulus of the PLA increased with the addition of natural fibers, while the flexural strength decreased. The highest impact strength (34 J m−1), flexural modulus (4.5 GPa) and flexural strength (90 MPa) were obtained for the composite made of PLA/kenaf (PLA-K), which means kenaf natural fibers are potential to be used as an alternative filler to enhance mechanical properties. On the other hand PLA-RH composite exhibits lower mechanical properties. The impact strength of PLA has decreased when filled with natural fibers; this decrease is more pronounced in the PLA-RH composite. In terms of thermal stability it has been found that the addition of natural fibers decreased the thermal stability of virgin PLA and the decrement was more prominent in the PLA-RH composite. Biodegradability of the composites slightly increased and reached 1.2 and 0.8% for PLA-K and PLA-RH respectively for a period of 90 days. SEM micrographs showed poor interfacial between the polymer matrix and natural fibers.

I and i

Abstract: There is, I think, something ethereal about i —the square root of minus one. I remember first hearing about it at school. It seemed an odd beast at that time—an intruder hovering on the edge of reality. Usually familiarity dulls this sense of the bizarre, but in the case of i it was the reverse: over the years the sense of its surreal nature intensified. It seemed that it was impossible to write mathematics that described the real world in …

A Review on Natural Fiber Reinforced Polymer Composite and Its Applications

Abstract: Natural fibers are getting attention from researchers and academician to utilize in polymer composites due to their ecofriendly nature and sustainability. The aim of this review article is to provide a comprehensive review of the foremost appropriate as well as widely used natural fiber reinforced polymer composites (NFPCs) and their applications. In addition, it presents summary of various surface treatments applied to natural fibers and their effect on NFPCs properties. The properties of NFPCs vary with fiber type and fiber source as well as fiber structure. The effects of various chemical treatments on the mechanical and thermal properties of natural fibers reinforcements thermosetting and thermoplastics composites were studied. A number of drawbacks of NFPCs like higher water absorption, inferior fire resistance, and lower mechanical properties limited its applications. Impacts of chemical treatment on the water absorption, tribology, viscoelastic behavior, relaxation behavior, energy absorption flames retardancy, and biodegradability properties of NFPCs were also highlighted. The applications of NFPCs in automobile and construction industry and other applications are demonstrated. It concluded that chemical treatment of the natural fiber improved adhesion between the fiber surface and the polymer matrix which ultimately enhanced physicomechanical and thermochemical properties of the NFPCs.