Author
B. Hafner
Bio: B. Hafner is an academic researcher from FH Aachen. The author has contributed to research in topics: Thermal energy storage & Heat transfer. The author has an hindex of 2, co-authored 2 publications receiving 654 citations.
Papers
More filters
TL;DR: In this paper, various heat transfer enhancement methods for latent heat thermal storage (LHTS) systems are discussed and three different experiments to augment heat transfer were conducted and the findings are reported.
483 citations
TL;DR: In this article, a cylindrical vertical tube with internal longitudinal fin arrangement and phase change material (PCM) is used to enhance heat transfer in a thermal storage system, where the fin arrangement gives maximum benefit to fin arrangement.
229 citations
Cited by
More filters
TL;DR: In this paper, a review of the history of thermal energy storage with solid-liquid phase change has been carried out and three aspects have been the focus of this review: materials, heat transfer and applications.
4,019 citations
TL;DR: In this paper, a review of the phase change materials (PCM) and their application in energy storage is presented, where the main advantages of encapsulation are providing large heat transfer area, reduction of the PCMs reactivity towards the outside environment and controlling the changes in volume of the storage materials as phase change occurs.
2,636 citations
TL;DR: In this paper, the phase change problem has been formulated using pure conduction approach but the problem has moved to a different level of complexity with added convection in the melt being accounted for, which makes it difficult for comparison to be made to assess the suitability of PCMs to particular applications.
Abstract: This paper reviews the development of latent heat thermal energy storage systems studied detailing various phase change materials (PCMs) investigated over the last three decades, the heat transfer and enhancement techniques employed in PCMs to effectively charge and discharge latent heat energy and the formulation of the phase change problem. It also examines the geometry and configurations of PCM containers and a series of numerical and experimental tests undertaken to assess the effects of parameters such as the inlet temperature and the mass flow rate of the heat transfer fluid (HTF). It is concluded that most of the phase change problems have been carried out at temperature ranges between 0 °C and 60 °C suitable for domestic heating applications. In terms of problem formulation, the common approach has been the use of enthalpy formulation. Heat transfer in the phase change problem was previously formulated using pure conduction approach but the problem has moved to a different level of complexity with added convection in the melt being accounted for. There is no standard method (such as British Standards or EU standards) developed to test for PCMs, making it difficult for comparison to be made to assess the suitability of PCMs to particular applications. A unified platform such as British Standards, EU standards needs to be developed to ensure same or similar procedure and analysis (performance curves) to allow comparison and knowledge gained from one test to be applied to another.
1,630 citations
TL;DR: In this article, the state of the art of phase change materials for thermal energy storage applications is reviewed and an insight into recent efforts to develop new phase change material with enhanced performance and safety.
1,399 citations
TL;DR: In this paper, the state of the art of phase change materials (PCMs) for storing solar energy is discussed. But, prior to the large-scale practical application of this technology, it is necessary to resolve numerous problems at the research and development stage.
Abstract: The continuous increase in the level of greenhouse gas emissions and the climb in fuel prices are the main driving forces behind efforts to more effectively utilise various sources of renewable energy. In many parts of the world, direct solar radiation is considered to be one of the most prospective sources of energy. However, the large-scale utilisation of this form of energy is possible only if the effective technology for its storage can be developed with acceptable capital and running costs. One of prospective techniques of storing solar energy is the application of phase change materials (PCMs). Unfortunately, prior to the large-scale practical application of this technology, it is necessary to resolve numerous problems at the research and development stage. This paper looks at the current state of research in this particular field, with the main focus being on the assessment of the thermal properties of various PCMs, methods of heat transfer enhancement and design configurations of heat storage facilities to be used as a part of solar passive and active space heating systems, greenhouses and solar cooking.
1,173 citations