scispace - formally typeset
Search or ask a question
Author

B. R. Zegarski

Other affiliations: Alcatel-Lucent
Bio: B. R. Zegarski is an academic researcher from Bell Labs. The author has contributed to research in topics: Adsorption & Excited state. The author has an hindex of 18, co-authored 41 publications receiving 1787 citations. Previous affiliations of B. R. Zegarski include Alcatel-Lucent.

Papers
More filters
Journal ArticleDOI
TL;DR: In this paper, the adsorption of methanethiol and dimethyl disulfide on an Au(111) surface under UHV conditions was studied and it was found that, under these conditions, the disulfides bond is dissociated to give a stable surface thiolate.
Abstract: Studies of the adsorption of methanethiol and dimethyl disulfide on an Au(111) surface under UHV conditions are described. Both adsorbates bind strongly, with the bonding of the disulfide being greatly favored. It is found that, under these conditions, the disulfide bond is dissociated to give a stable surface thiolate. Adsorption of methanethiol does not involve cleavage of the S-H bond. The implications of these results for solution adsorption experiments and the thermodynamics characterizing monolayer formation are discussed.

902 citations

Journal ArticleDOI
TL;DR: In this paper, the reaction of tetrakis(dimethylamido)titanium (Ti(NMe 2 ) 4 ) with ammonia has been studied in the gas phase and on titanium disilicide, aluminum, and copper surfaces using infrared spectroscopy.
Abstract: The reaction of tetrakis(dimethylamido)titanium (Ti(NMe 2 ) 4 ) with ammonia has been studied in the gas phase and on titanium disilicide, aluminum, and copper surfaces using infrared spectroscopy. In the gas phase the main product of this reaction, dimethylamine, forms rapidly even at 300 K, and a fine yellow powder is deposited on the windows of the IR cell. Under ultrahigh vacuum conditions there is no reaction between Ti(NMe 2 ) 4 and NH 3 on any of the three surfaces studied at temperature-between 300 and 650 K

103 citations

Journal ArticleDOI
TL;DR: In this article, the authors used both time-resolved and static high resolution electron energy loss spectroscopies (EELS) to follow the chemisorption and subsequent decompostion of formic acid (HCOOH) on a Cu(1100) surface.

90 citations

Journal ArticleDOI
TL;DR: In this article, the adsorption of Cu(hfac)(vtms) on high surface area silica using transmission infrared spectroscopy was studied and the question of selectivity (on metal vs. insulator) in the growth of copper thin films from organometallic precursors was addressed.
Abstract: The question of selectivity (on metal vs. insulator) in the growth of copper thin films from organometallic precursors is addressed by studying the adsorption of Cu(hfac)(vtms) (where hfac = 1,1,1,5,5,5‐hexafluoroacetylacetonate and vtms = vinyltrimethylsilane) on high surface area silica using transmission infrared spectroscopy. No deposition is observed on dehydrated . In the presence of adsorbed, hydrogen bonded OH (OD) groups (from the dissociative adsorption of either water or ), thin film growth is nucleated and selectivity is lost. In addition, temperature‐programmed desorption is employed to study the bonding of a number of neutral ligands to Cu(100). This information is then used to correlate the activation energy for desorption with the observed selectivity of a series of CuI β‐diketonates.

67 citations


Cited by
More filters
Journal ArticleDOI
TL;DR: Monolayers of alkanethiolates on gold are probably the most studied SAMs to date and offer the needed design flexibility, both at the individual molecular and at the material levels, and offer a vehicle for investigation of specific interactions at interfaces, and of the effect of increasing molecular complexity on the structure and stability of two-dimensional assemblies.
Abstract: The field of self-assembled monolayers (SAMs) has witnessed tremendous growth in synthetic sophistication and depth of characterization over the past 15 years.1 However, it is interesting to comment on the modest beginning and on important milestones. The field really began much earlier than is now recognized. In 1946 Zisman published the preparation of a monomolecular layer by adsorption (self-assembly) of a surfactant onto a clean metal surface.2 At that time, the potential of self-assembly was not recognized, and this publication initiated only a limited level of interest. Early work initiated in Kuhn’s laboratory at Gottingen, applying many years of experience in using chlorosilane derivative to hydrophobize glass, was followed by the more recent discovery, when Nuzzo and Allara showed that SAMs of alkanethiolates on gold can be prepared by adsorption of di-n-alkyl disulfides from dilute solutions.3 Getting away from the moisture-sensitive alkyl trichlorosilanes, as well as working with crystalline gold surfaces, were two important reasons for the success of these SAMs. Many self-assembly systems have since been investigated, but monolayers of alkanethiolates on gold are probably the most studied SAMs to date. The formation of monolayers by self-assembly of surfactant molecules at surfaces is one example of the general phenomena of self-assembly. In nature, self-assembly results in supermolecular hierarchical organizations of interlocking components that provides very complex systems.4 SAMs offer unique opportunities to increase fundamental understanding of self-organization, structure-property relationships, and interfacial phenomena. The ability to tailor both head and tail groups of the constituent molecules makes SAMs excellent systems for a more fundamental understanding of phenomena affected by competing intermolecular, molecular-substrates and molecule-solvent interactions like ordering and growth, wetting, adhesion, lubrication, and corrosion. That SAMs are well-defined and accessible makes them good model systems for studies of physical chemistry and statistical physics in two dimensions, and the crossover to three dimensions. SAMs provide the needed design flexibility, both at the individual molecular and at the material levels, and offer a vehicle for investigation of specific interactions at interfaces, and of the effect of increasing molecular complexity on the structure and stability of two-dimensional assemblies. These studies may eventually produce the design capabilities needed for assemblies of three-dimensional structures.5 However, this will require studies of more complex systems and the combination of what has been learned from SAMs with macromolecular science. The exponential growth in SAM research is a demonstration of the changes chemistry as a disciAbraham Ulman was born in Haifa, Israel, in 1946. He studied chemistry in the Bar-Ilan University in Ramat-Gan, Israel, and received his B.Sc. in 1969. He received his M.Sc. in phosphorus chemistry from Bar-Ilan University in 1971. After a brief period in industry, he moved to the Weizmann Institute in Rehovot, Israel, and received his Ph.D. in 1978 for work on heterosubstituted porphyrins. He then spent two years at Northwestern University in Evanston, IL, where his main interest was onedimensional organic conductors. In 1985 he joined the Corporate Research Laboratories of Eastman Kodak Company, in Rochester, NY, where his research interests were molecular design of materials for nonlinear optics and self-assembled monolayers. In 1994 he moved to Polytechnic University where he is the Alstadt-Lord-Mark Professor of Chemistry. His interests encompass self-assembled monolayers, surface engineering, polymers at interface, and surfaces phenomena. 1533 Chem. Rev. 1996, 96, 1533−1554

7,465 citations

Journal ArticleDOI
TL;DR: Soft lithography offers the ability to control the molecular structure of surfaces and to pattern the complex molecules relevant to biology, to fabricate channel structures appropriate for microfluidics, and topattern and manipulate cells.
Abstract: ▪ Abstract Soft lithography, a set of techniques for microfabrication, is based on printing and molding using elastomeric stamps with the patterns of interest in bas-relief. As a technique for fabricating microstructures for biological applications, soft lithography overcomes many of the shortcomings of photolithography. In particular, soft lithography offers the ability to control the molecular structure of surfaces and to pattern the complex molecules relevant to biology, to fabricate channel structures appropriate for microfluidics, and to pattern and manipulate cells. For the relatively large feature sizes used in biology (≥50 μm), production of prototype patterns and structures is convenient, inexpensive, and rapid. Self-assembled monolayers of alkanethiolates on gold are particularly easy to pattern by soft lithography, and they provide exquisite control over surface biochemistry.

2,659 citations

Journal ArticleDOI
TL;DR: In this article, the structural phases and the growth of self-assembled monolayers (SAMs) are reviewed from a surface science perspective, with emphasis on simple model systems, and a summary of the techniques used for the study of SAMs is given.

2,374 citations

Journal ArticleDOI
TL;DR: This Review discusses the recent progress from the viewpoint of theory and computations, with connections to relevant experiments in the understanding of the molecular structure of the gold-sulfur interface in these systems.
Abstract: Thiolate-protected gold surfaces and interfaces, relevant for self-assembled monolayers of organic molecules on gold, for passivated gold nanoclusters and for molecule-gold junctions, are archetypal systems in various fields of current nanoscience research, materials science, inorganic chemistry and surface science. Understanding this interface at the nanometre scale is essential for a wide range of potential applications for site-specific bioconjugate labelling and sensing, drug delivery and medical therapy, functionalization of gold surfaces for sensing, molecular recognition and molecular electronics, and gold nanoparticle catalysis. During the past five years, considerable experimental and theoretical advances have furthered our understanding of the molecular structure of the gold-sulfur interface in these systems. This Review discusses the recent progress from the viewpoint of theory and computations, with connections to relevant experiments.

1,408 citations