Babak Nikoobakht and

Bio: Babak Nikoobakht and is an academic researcher from Georgia Institute of Technology. The author has contributed to research in topics: Nanorod & Thermogravimetric analysis. The author has an hindex of 3, co-authored 3 publications receiving 5531 citations.

Preparation and Growth Mechanism of Gold Nanorods (NRs) Using Seed-Mediated Growth Method

Abstract: A method is used for preparing gold NRs with aspect ratios ranging from 1.5 to 10 for which the surface plasmon absorption maxima are between 600 and 1300 nm. This method has been adapted from a previously published seed-mediated growth method (Jana et al. Adv. Mater. 2001, 13, 1389). The disadvantages and limitations of the earlier method (i.e., formation of noncylindrical NRs, φ-shaped particles, and formation of a large fraction of spherical particles) have been overcome by use of a hexadecyltrimethylammonium bromide (CTAB)-capped seed instead of a citrate-capped one. In a single-component surfactant system, the silver content of the growth solution was used to grow NRs to a desired length. This results in reproducible formation of NRs with aspect ratios ranging from 1.5 to 4.5. To grow longer NRs with aspect ratios ranging from 4.6 to 10, a binary surfactant mixture composed of benzyldimethylhexadecylammoniumchloride (BDAC) and CTAB was used. NRs are grown in this mixture either by aging or by additio...

Evidence for Bilayer Assembly of Cationic Surfactants on the Surface of Gold Nanorods

Abstract: The surface structure of gold nanorods (NRs) capped with cationic surfactants in water was studied by FTIR, thermogravimetric analysis (TGA), and transmission electron microscopy (TEM). For gold nanorods, the FTIR results show the formation of new bands, which indicate binding of the surfactant headgroup to the surface of the NR. These bands are stable at temperatures as high as 350 °C. For a surfactant mixture (used as capping material), TGA shows a weak weight loss peak at 235 °C and a strong peak at 298 °C assigned to the surfactant molecules in monomer and aggregated forms, respectively. For gold nanorods, three weight loss peaks at about 230, 273, and 344 °C are observed. For gold nanospheres (NSs), TGA shows a strong mass loss at 225 °C and two weak mass loss peaks at 255 and 288 °C. The released material after combustion in the TGA process was analyzed by FTIR spectroscopy and found to be CO2. Our results suggest the following for both NRs and NSs: (1) There are two different binding modes for the...

Surface-Enhanced Raman Scattering Studies on Aggregated Gold Nanorods†

Abstract: Surface-enhanced Raman scattering (SERS) of adsorbed molecules on gold nanorods (NRs) with dimensions of 10 nm × 27 nm was studied on silica surface with low to high surface coverage of NRs. The study was carried out to investigate both the dependence of the SERS intensity on the number of NRs and the NRs spacing on the silica surface. SERS of adsorbed molecules such as 2-aminothiophenol (2-ATP) and the capping molecules (hexadecyltrimethylammonium bromide) was studied on these surfaces using a near-IR laser excitation source (1064 nm). To produce silica surfaces covered with NRs, two approaches were used. In the first approach, monodispersed NRs gradually deposited from solution to silica surface and their number was increased by increasing the deposition time. In the second one, the NRs were first aggregated in solution and then deposited on the surface. Although using the first approach it was possible to prepare surfaces with high NR surface coverage, SERS intensity was found to be stronger for adsorb...

Biosensing with plasmonic nanosensors

Abstract: Recent developments have greatly improved the sensitivity of optical sensors based on metal nanoparticle arrays and single nanoparticles. We introduce the localized surface plasmon resonance (LSPR) sensor and describe how its exquisite sensitivity to size, shape and environment can be harnessed to detect molecular binding events and changes in molecular conformation. We then describe recent progress in three areas representing the most significant challenges: pushing sensitivity towards the single-molecule detection limit, combining LSPR with complementary molecular identification techniques such as surface-enhanced Raman spectroscopy, and practical development of sensors and instrumentation for routine use and high-throughput detection. This review highlights several exceptionally promising research directions and discusses how diverse applications of plasmonic nanoparticles can be integrated in the near future.

Cancer Cell Imaging and Photothermal Therapy in the Near-Infrared Region by Using Gold Nanorods

Abstract: Due to strong electric fields at the surface, the absorption and scattering of electromagnetic radiation by noble metal nanoparticles are strongly enhanced. These unique properties provide the potential of designing novel optically active reagents for simultaneous molecular imaging and photothermal cancer therapy. It is desirable to use agents that are active in the near-infrared (NIR) region of the radiation spectrum to minimize the light extinction by intrinsic chromophores in native tissue. Gold nanorods with suitable aspect ratios (length divided by width) can absorb and scatter strongly in the NIR region (650−900 nm). In the present work, we provide an in vitro demonstration of gold nanorods as novel contrast agents for both molecular imaging and photothermal cancer therapy. Nanorods are synthesized and conjugated to anti-epidermal growth factor receptor (anti-EGFR) monoclonal antibodies and incubated in cell cultures with a nonmalignant epithelial cell line (HaCat) and two malignant oral epithelial ...

Shape‐Controlled Synthesis of Metal Nanocrystals: Simple Chemistry Meets Complex Physics?

Abstract: Nanocrystals are fundamental to modern science and technology. Mastery over the shape of a nanocrystal enables control of its properties and enhancement of its usefulness for a given application. Our aim is to present a comprehensive review of current research activities that center on the shape-controlled synthesis of metal nanocrystals. We begin with a brief introduction to nucleation and growth within the context of metal nanocrystal synthesis, followed by a discussion of the possible shapes that a metal nanocrystal might take under different conditions. We then focus on a variety of experimental parameters that have been explored to manipulate the nucleation and growth of metal nanocrystals in solution-phase syntheses in an effort to generate specific shapes. We then elaborate on these approaches by selecting examples in which there is already reasonable understanding for the observed shape control or at least the protocols have proven to be reproducible and controllable. Finally, we highlight a number of applications that have been enabled and/or enhanced by the shape-controlled synthesis of metal nanocrystals. We conclude this article with personal perspectives on the directions toward which future research in this field might take.

Noble Metals on the Nanoscale: Optical and Photothermal Properties and Some Applications in Imaging, Sensing, Biology, and Medicine

Abstract: Noble metal nanostructures attract much interest because of their unique properties, including large optical field enhancements resulting in the strong scattering and absorption of light. The enhancement in the optical and photothermal properties of noble metal nanoparticles arises from resonant oscillation of their free electrons in the presence of light, also known as localized surface plasmon resonance (LSPR). The plasmon resonance can either radiate light (Mie scattering), a process that finds great utility in optical and imaging fields, or be rapidly converted to heat (absorption); the latter mechanism of dissipation has opened up applications in several new areas. The ability to integrate metal nanoparticles into biological systems has had greatest impact in biology and biomedicine. In this Account, we discuss the plasmonic properties of gold and silver nanostructures and present examples of how they are being utilized for biodiagnostics, biophysical studies, and medical therapy. For instance, takin...

Anisotropic metal nanoparticles: Synthesis, assembly, and optical applications

Abstract: This feature article highlights work from the authors' laboratories on the synthesis, assembly, reactivity, and optical applications of metallic nanoparticles of nonspherical shape, especially nanorods. The synthesis is a seed-mediated growth procedure, in which metal salts are reduced initially with a strong reducing agent, in water, to produce ∼4 nm seed particles. Subsequent reduction of more metal salt with a weak reducing agent, in the presence of structure-directing additives, leads to the controlled formation of nanorods of specified aspect ratio and can also yield other shapes of nanoparticles (stars, tetrapods, blocks, cubes, etc.). Variations in reaction conditions and crystallographic analysis of gold nanorods have led to insight into the growth mechanism of these materials. Assembly of nanorods can be driven by simple evaporation from solution or by rational design with molecular-scale connectors. Short nanorods appear to be more chemically reactive than long nanorods. Finally, optical applica...