Baldev Raj

Bio: Baldev Raj is an academic researcher from National Institute of Advanced Studies. The author has contributed to research in topics: Austenitic stainless steel & Corrosion. The author has an hindex of 62, co-authored 823 publications receiving 16498 citations. Previous affiliations of Baldev Raj include Bhabha Atomic Research Centre & Indian Institute of Science.

Enhancement of thermal conductivity in magnetite based nanofluid due to chainlike structures

Abstract: We observe a dramatic enhancement of thermal conductivity in a nanofluid containing magnetite particles of average diameter of 6.7nm under the influence of an applied magnetic field. The maximum enhancement in the thermal conductivity observed is 300% (k∕kf=4.0) at a particle loading of 6.3vol%. The increase in thermal conductivity is attributed to the effective conduction of heat through the chainlike structures formed in the nanofluid. This finding is consistent with the theoretical prediction of enhanced thermal conductivity in nanofluid containing fractal aggregates [R. Prasher et al., Appl. Phys. Lett.89, 143119 (2006)].

Corrosion of bio implants

Abstract: Chemical stability, mechanical behaviour and biocompatibility in body fluids and tissues are the basic requirements for successful application of implant materials in bone fractures and replacements. Corrosion is one of the major processes affecting the life and service of orthopaedic devices made of metals and alloys used as implants in the body. Among the metals and alloys known, stainless steels (SS), Co-Cr alloys and titanium and its alloys are the most widely used for the making of biodevices for extended life in human body. Incidences of failure of stainless steel implant devices reveal the occurrence of significant localised corroding viz., pitting and crevice corrosion. Titanium forms a stable TiO2 film which can release titanium particles under wear into the body environment. To reduce corrosion and achieve better biocompatibility, bulk alloying of stainless steels with titanium and nitrogen, surface alloying by ion implantation of stainless steels and titanium and its alloys, and surface modification of stainless steel with bioceramic coatings are considered potential methods for improving the performance of orthopaedic devices. This review discusses these issues in depth and examines emerging directions.

Evidence for enhanced thermal conduction through percolating structures in nanofluids

Abstract: The unusually large enhancement of thermal conductivity (k/k(f)∼4.0, where k and k(f) are the thermal conductivities of the nanofluid and the base fluid, respectively) observed in a nanofluid containing linear chain-like aggregates provides direct evidence for efficient transport of heat through percolating paths. The nanofluid used was a stable colloidal suspension of magnetite (Fe(3)O(4)) nanoparticles of average diameter 6.7 nm, coated with oleic acid and dispersed in kerosene. The maximum enhancement under magnetic field was about 48φ (where φ is the volume fraction). The maximum enhancement is observed when chain-like aggregates are uniformly dispersed without clumping. These results also suggest that nanofluids containing well-dispersed nanoparticles (without aggregates) do not exhibit significant enhancement of thermal conductivity. Our findings offer promising applications for developing a new generation of nanofluids with tunable thermal conductivity.

I and i

Abstract: There is, I think, something ethereal about i —the square root of minus one. I remember first hearing about it at school. It seemed an odd beast at that time—an intruder hovering on the edge of reality. Usually familiarity dulls this sense of the bizarre, but in the case of i it was the reverse: over the years the sense of its surreal nature intensified. It seemed that it was impossible to write mathematics that described the real world in …

Numerical study of convection observed during the Winter Monsoon Experiment using a mesoscale two-dimensional model [presentation]

Abstract: Abstract A two-dimensional version of the Pennsylvania State University mesoscale model has been applied to Winter Monsoon Experiment data in order to simulate the diurnally occurring convection observed over the South China Sea. The domain includes a representation of part of Borneo as well as the sea so that the model can simulate the initiation of convection. Also included in the model are parameterizations of mesoscale ice phase and moisture processes and longwave and shortwave radiation with a diurnal cycle. This allows use of the model to test the relative importance of various heating mechanisms to the stratiform cloud deck, which typically occupies several hundred kilometers of the domain. Frank and Cohen's cumulus parameterization scheme is employed to represent vital unresolved vertical transports in the convective area. The major conclusions are: Ice phase processes are important in determining the level of maximum large-scale heating and vertical motion because there is a strong anvil componen...

Handbook of Chemistry and Physics

Abstract: There is a special reason for reviewing this book at this time: it is the 50th edition of a compendium that is known and used frequently in most chemical and physical laboratories in many parts of the world. Surely, a publication that has been published for 56 years, withstanding the vagaries of science in this century, must have had something to offer. There is another reason: while the book is a standard fixture in most chemical and physical laboratories, including those in medical centers, it is not as frequently seen in the laboratories of physician's offices (those either in solo or group practice). I believe that the Handbook can be useful in those laboratories. One of the reasons, among others, is that the various basic items of information it offers may be helpful in new tests, either physical or chemical, which are continuously being published. The basic information may relate

Laser additive manufacturing of metallic components: materials, processes and mechanisms

Abstract: Unlike conventional materials removal methods, additive manufacturing (AM) is based on a novel materials incremental manufacturing philosophy. Additive manufacturing implies layer by layer shaping and consolidation of powder feedstock to arbitrary configurations, normally using a computer controlled laser. The current development focus of AM is to produce complex shaped functional metallic components, including metals, alloys and metal matrix composites (MMCs), to meet demanding requirements from aerospace, defence, automotive and biomedical industries. Laser sintering (LS), laser melting (LM) and laser metal deposition (LMD) are presently regarded as the three most versatile AM processes. Laser based AM processes generally have a complex non-equilibrium physical and chemical metallurgical nature, which is material and process dependent. The influence of material characteristics and processing conditions on metallurgical mechanisms and resultant microstructural and mechanical properties of AM proc...