Barbara D. Boyan

Bio: Barbara D. Boyan is an academic researcher from Virginia Commonwealth University. The author has contributed to research in topics: Osteoblast & Protein kinase C. The author has an hindex of 91, co-authored 468 publications receiving 31098 citations. Previous affiliations of Barbara D. Boyan include University of Health Science & University of Texas at San Antonio.

Effect of titanium surface roughness on proliferation, differentiation, and protein synthesis of human osteoblast-like cells (MG63)

Abstract: The effect of surface roughness on osteoblast proliferation, differentiation, and protein synthesis was examined. Human osteoblast-like cells (MG63) were cultured on titanium (Ti) disks that had been prepared by one of five different treatment regimens. All disks were pretreated with hydrofluoric acid-nitric acid and washed (PT). PT disks were also: washed, and then electropolished (EP); fine sandblasted, etched with HCl and H 2 SO 4 , and washed (FA); coarse sandblasted, etched with HCl and H 2 SO 4 , and washed (CA); or Ti plasma-sprayed (TPS). Standard tissue culture plastic was used as a control. Surface topography and profile were evaluated by brightfield and darkfield microscopy, cold field emission scanning electron microscopy, and laser confocal microscopy, while chemical composition was mapped using energy dispersion X-ray analysis and elemental distribution determined using Auger electron spectroscopy. The effect of surface roughness on the cells was evaluated by measuring cell number, [ 3 H]thymidine incorporation into DNA, alkaline phosphatase specific activity, [ 3 H]uridine incorporation into RNA, [ 3 H]proline incorporation into collagenase digestible protein (CDP) and noncollagenase-digestible protein (NCP), and [ 35 S]sulfate incorporation into proteoglycan. Based on surface analysis, the five different Ti surfaces were ranked in order of smoothest to roughest: EP, PT, FA, CA, and TPS. A TiO 2 layer was found on all surfaces that ranged in thickness from 100 A in the smoothest group to 300 A in the roughest. When compared to confluent cultures of cells on plastic, the number of cells was reduced on the TPS surfaces and increased on the EP surfaces, while the number of cells on the other surfaces was equivalent to plastic. [ 3 H]Thymidine incorporation was inversely related to surface roughness. Alkaline phosphatase specific activity in isolated cells was found to decrease with increasing surface roughness, except for those cells cultured on CA. In contrast, enzyme activity in the cell layer was only decreased in cultures grown on FA- and TPS-treated surfaces. A direct correlation between surface roughness and A and CDP production was found. Surface roughness had no apparent effect on NCP production. Proteoglycan synthesis by the cells was inhibited on all the surfaces studied, with the largest inhibition observed in the CA and EP groups. These results demonstrate that surface roughness alters osteoblast proliferation, differentiation, and matrix production in vitro. The results also suggest that implant surface roughness may play a role in determining phenotypic expression of cells in vivo

A review of polyvinyl alcohol and its uses in cartilage and orthopedic applications.

Abstract: Polyvinyl alcohol (PVA) is a synthetic polymer derived from polyvinyl acetate through partial or full hydroxylation. PVA is commonly used in medical devices due to its low protein adsorption characteristics, biocompat- ibility, high water solubility, and chemical resistance. Some of the most common medical uses of PVA are in soft contact lenses, eye drops, embolization particles, tissue adhesion barriers, and as artificial cartilage and meniscus. The pur- pose of this review is to evaluate the available published information on PVA with respect to its safety as a medical device implant material for cartilage replacement. The review includes historical clinical use of PVA in orthopedics, and in vitro and in vivo biocompatibility studies. Finally, the safety recommendation involving the further development of PVA cryogels for cartilage replacement is addressed.

High surface energy enhances cell response to titanium substrate microstructure.

Abstract: Titanium (Ti) is used for implantable devices because of its biocompatible oxide surface layer. TiO2 surfaces that have a complex microtopography increase bone-to-implant contact and removal torque forces in vivo and induce osteoblast differentiation in vitro. Studies examining osteoblast response to controlled surface chemistries indicate that hydrophilic surfaces are osteogenic, but TiO2 surfaces produced until now exhibit low surface energy because of adsorbed hydrocarbons and carbonates from the ambient atmosphere or roughness induced hydrophobicity. Novel hydroxylated/hydrated Ti surfaces were used to retain high surface energy of TiO2. Osteoblasts grown on this modified surface exhibited a more differentiated phenotype characterized by increased alkaline phosphatase activity and osteocalcin and generated an osteogenic microenvironment through higher production of PGE2 and TGF-beta1. Moreover, 1alpha,25OH2D3 increased these effects in a manner that was synergistic with high surface energy. This suggests that increased bone formation observed on modified Ti surfaces in vivo is due in part to stimulatory effects of high surface energy on osteoblasts.

Vitamin D deficiency.

Abstract: admission. This proportion could already be greater in some parts of the country and may increase if referrals of cases of self-poisoning increase faster than the facilities for their assessment and management. The provision of social work and psychiatric expertise in casualty departments may be one means of preventing unnecessary medical admissions without risk to the patients. Dr Blake's and Dr Bramble's figures do not demonstrate, however, that any advantage would attach to medical teams taking over assessment from psychiatrists except that, by implication, assessments would be completed sooner by staff working on the ward full time. What the figures actually suggest is that if assessment of overdoses were left to house doctors there would be an increase in admissions to psychiatric units (by 19°U), outpatients (by 5O°'), and referrals to social services (by 140o). So for house doctors to assess overdoses would provide no economy for the psychiatric or social services. The study does not tell us what the consequences would have been for the six patients who the psychiatrists would have admitted but to whom the house doctors would have offered outpatient appointments. E J SALTER

Mesenchymal Stem Cells

Abstract: Institute of Biological Medicine, Moscow The formation of the concept of a mesenchymal stem cell (MSC) is a priority of Russian biological science. A. Ya. Fridenshtein and his colleagues were the first who experimentally proved the existence of MSC. Osteogenic potential of fibroblastlike bone marrow cells of different mammalian species was demonstrated [25,26]. Fibroblast-like bone marrow cells often formed discrete adhesive colonies in vitro [27,28,47]. After heteroand orthotopic transplantation in vivo cloned cells from these colonies formed bone, cartilaginous, fibrous, and adipose tissues [48]. Intensive self-renewal and multipotency of fibroblast-like colony-forming cells from the bone marrow allowed Fridenshtein and Owen to formulate a concept of multipotent mesenchymal precursor cells (MPC) [62]. An ordered chain of finely regulated cell proliferation, migration, differentiation, and maturation processes underlies the formation of the majority of cell lineages in adult organisms. The earliest cell elements in this chain are stem cells (SC). Along with extensive self-renewal capacity, SC possess a great differentiation potential. Apart from well studied hemopoietic and intestinal SC, other SC classes were recently discovered in adult organism. Until recently it was considered that SC in adults can give rise to cell lines specific to tissues where these cells are located; however, new facts necessitated revision of this concept. Hemopoietic SC capable of differentiating into all cell elements of the blood, can also be a source of hepatic oval cells [65]; neural SC, precursors of neurons and glia [2,3], serve as the source of early and committed hemopoietic precursors [10]. MSC, a source of bone, cartilaginous, and adipose tissue cells, can differentiate into neural cells [46]. Tissue growth and reparation are associated with migration of uncommitted precursor cells from other tissues. During muscle tissue reparation mesenchymal SC migrate from the bone marrow into skeletal muscles [24]. Hence, in addition to capacity to unlimited division and reproduction of a wide spectrum of descendants of a certain differentiation line, adult SC are characterized by high plasticity. The existence of a rare type of somatic pluripotent SC, common precursors of all SC in an adult organism, is hypothesized [79]. Another important characteristic of SC is their migration from the tissue niche into circulation, which was experimentally proven for hemopoietic and MSC [69,73]. For activation of the differentiation program, circulating SC should get into an appropriate microenvironment [75,78]. A potent stimulus for investigation of SC is the possibility of their clinical use in cell and gene therapy. The bone marrow contains multipotent MSC, which can be easily isolated and cultured in vitro. It is therefore interesting to analyze some fundamental aspects of MSC biology and the possibilities of their clinical use. MSC descendants are involved in the formation of bones, cartilages, tendons, adipose and muscle tissues, and stroma maintaining the hemopoiesis [12,19,51]. The term MPC is used to denote MSC and their committed descendants capable of differentiating into at least two types of mature cells, which are present in the bone marrow and some mesenchymal tissues [16,19,57,82].

Surface modification of titanium, titanium alloys, and related materials for biomedical applications

Abstract: Titanium and titanium alloys are widely used in biomedical devices and components, especially as hard tissue replacements as well as in cardiac and cardiovascular applications, because of their desirable properties, such as relatively low modulus, good fatigue strength, formability, machinability, corrosion resistance, and biocompatibility. However, titanium and its alloys cannot meet all of the clinical requirements. Therefore, in order to improve the biological, chemical, and mechanical properties, surface modification is often performed. This article reviews the various surface modification technologies pertaining to titanium and titanium alloys including mechanical treatment, thermal spraying, sol–gel, chemical and electrochemical treatment, and ion implantation from the perspective of biomedical engineering. Recent work has shown that the wear resistance, corrosion resistance, and biological properties of titanium and titanium alloys can be improved selectively using the appropriate surface treatment techniques while the desirable bulk attributes of the materials are retained. The proper surface treatment expands the use of titanium and titanium alloys in the biomedical fields. Some of the recent applications are also discussed in this paper.

Exploring and engineering the cell surface interface.

Abstract: Cells are inherently sensitive to local mesoscale, microscale, and nanoscale patterns of chemistry and topography. We review current approaches to control cell behavior through the nanoscale engineering of materials surfaces. Far-reaching implications are emerging for applications including medical implants, cell supports, and materials that can be used as instructive three-dimensional environments for tissue regeneration.