Barry Miller

Bio: Barry Miller is an academic researcher from Alcatel-Lucent. The author has contributed to research in topics: Laser & Semiconductor laser theory. The author has an hindex of 60, co-authored 404 publications receiving 12262 citations. Previous affiliations of Barry Miller include AT&T & Bell Labs.

Conducting films of C60 and C70 by alkali-metal doping

Abstract: THE recent syntheses1,2 of macroscopic quantities of C60 have suggested possible applications in host–guest and organic chemistry, tribology, electrochemistry and semiconductor tech-nology. Here we report the preparation of alkali-metal-doped films of C60 and C70 which have electrical conductivities at room temperature that are comparable to those attained by n-type doped polyacetylene. The highest conductivities observed in the doped films are: 4Scm−1 (Cs/C60), 100 (Rb/C60), 500 (K/C60), 20 (Na/C60), 10 (Li/C60), 2 (K/C70). The doping process is reversed on exposure of the films to the atmosphere. At high doping levels, the films become more resistive. We attribute the conductivity induced in these films to the formation of energy bands from the π orbitals of C60 or C70, which become partially filled with carriers on doping. The smaller alkali metal ions should be able to fit into the interstices in the lattice without disrupting the network of contacts between the carbon spheroids. In the case of C60, this would allow the development of an isotropic band structure, and we therefore propose that these materials may constitute the first three-dimensional 'organic' conductors.

Semiconductor liquid junction solar cells based on anodic sulphide films

Abstract: ALTHOUGH good performance has been achieved with established solid state junction solar cells, their cost remains well above that required for large scale terrestrial applications. New concepts1,2 for photovoltaic energy conversion have been introduced which involve the junction between a semiconductor and an electrolyte. These schemes may lead to new possibilities of considerably reduced materials and fabrication costs, providing that many technical problems could be solved. We report here metal–semiconductor–liquid electrolyte junctions in which an n-type sulphide semiconductor is anodically formed in situ on its metal and, under photoexcitation, drives a sulphide–polysulphide redox couple when connected to a suitable cathode. The original contribution in this area was made by Gerischer2 who demonstrated that the cell (single crystal n-CdS/Fe(CN)64−, Fe(CN)63−/SnO2) has an initial conversion efficiency > 5% (ref. 3) for sunlight to electric power, in spite of the 2.4-eV band gap of CdS, which implies that wavelengths > 550 nm (the greater part of the incident solar photons) are ineffective.

Tapered waveguide InGaAs/InGaAsP multiple-quantum-well lasers

Abstract: The use of ultrathin etch-stop techniques to expand the vertical optical mode size adiabatically in 1.5- mu m InGaAs/InGaAsP MQW lasers using a tapered-core passive intracavity waveguide structure is discussed. 30% differential quantum efficiency out the tapered facet, far-field FWHM of approximately 12 degrees and a butt-coupling efficiency into a cleaved fiber of -4.2 dB, with -1-dB alignment tolerances of approximately +or-3 mu m, were achieved. >

Hydrogen-evolving semiconductor photocathodes: nature of the junction and function of the platinum group metal catalyst

Abstract: Noble metal incorporation in the surface of p-type semiconductor photocathodes to catalyze hydrogen evolution leads to efficient solar to chemical conversion if a set of energetic and kinetic criteria are satisfied: (1) the semiconductor-catalyst junction barrier height must be equal to or greater than that of the semiconductor H/sup +//H/sub 2/ junction; (2) the recombination velocity of photogenerated electrons at the semiconductor-catalyst interface must be low; (3) the overpotential for hydrogen evolution at solar cell current densities (approx.30 mA/cm/sup 2/) must be minor. Because of substantial differences in the vacuum work functions of Pt, Rh, Ru, and the (redox potential of the) H/sup +//H/sub 2/ couple, the barrier heights for junctions of each of the four systems with p-InP ought to vary widely. Yet experiments show that all p-InP(M)/H/sup +//H/sub 2/ junctions, where M = Pt, Rh, Ru, or no metal, have essentially the same approx.0.7-V gain in onset potential for hydrogen evolution relative to Pt/H/sup +//H/sub 2/. We attribute the similarity to the known lowering of metal work functions upon hydrogen alloying. Such alloying increases the barrier height and thereby the gain in onset potential over that anticipated from the vacuum work functions. The barrier height, measured as themore » limiting value of onset potential gain at high irradiance, approaches in all cases the Fermi level difference of p-InP and H/sup +//H/sub 2/ (0.9 +/- 0.2 eV). That Fermi level pinning by interfacial states is not the cause of the similar barriers is evident from the reversible decrease in onset potential with hydrogen depletion and by a unity diode perfection factor of the p-InP(Rh)/H/sup +//H/sub 2/ photocathode, which indicates no measurable interfacial recombination of photogenerated carriers. In agreement, the quantum efficiency of carrier collection (hydrogen evolution) nears unity.« less

Split‐Ring Disk Study of the Anodic Processes at a Copper Electrode in Alkaline Solution

Abstract: The anodic oxidation of copper in hydroxide solutions has been reexamined with the rotating ring and split‐ring disk techniques. A soluble Cu(III) species has been identified in the anodic region at the onset of oxygen evolution. This species has also been generated at gold rings from disk‐produced Cu(II). Passivation processes in the copper (I) and (II) oxidation regions have been analyzed by means of the corresponding ring currents.

Polymer photovoltaic cells : enhanced efficiencies via a network of internal donor-acceptor heterojunctions

Abstract: The carrier collection efficiency (ηc) and energy conversion efficiency (ηe) of polymer photovoltaic cells were improved by blending of the semiconducting polymer with C60 or its functionalized derivatives. Composite films of poly(2-methoxy-5-(2′-ethyl-hexyloxy)-1,4-phenylene vinylene) (MEH-PPV) and fullerenes exhibit ηc of about 29 percent of electrons per photon and ηe of about 2.9 percent, efficiencies that are better by more than two orders of magnitude than those that have been achieved with devices made with pure MEH-PPV. The efficient charge separation results from photoinduced electron transfer from the MEH-PPV (as donor) to C60 (as acceptor); the high collection efficiency results from a bicontinuous network of internal donor-acceptor heterojunctions.

Solar Water Splitting Cells

Abstract: Energy harvested directly from sunlight offers a desirable approach toward fulfilling, with minimal environmental impact, the need for clean energy. Solar energy is a decentralized and inexhaustible natural resource, with the magnitude of the available solar power striking the earth’s surface at any one instant equal to 130 million 500 MW power plants.1 However, several important goals need to be met to fully utilize solar energy for the global energy demand. First, the means for solar energy conversion, storage, and distribution should be environmentally benign, i.e. protecting ecosystems instead of steadily weakening them. The next important goal is to provide a stable, constant energy flux. Due to the daily and seasonal variability in renewable energy sources such as sunlight, energy harvested from the sun needs to be efficiently converted into chemical fuel that can be stored, transported, and used upon demand. The biggest challenge is whether or not these goals can be met in a costeffective way on the terawatt scale.2

Photoinduced electron transfer from a conducting polymer to buckminsterfullerene.

Abstract: Evidence for photoinduced electron transfer from the excited state of a conducting polymer onto buckminsterfullerene, C(60), is reported. After photo-excitation of the conjugated polymer with light of energy greater than the pi-pi* gap, an electron transfer to the C(60) molecule is initiated. Photoinduced optical absorption studies demonstrate a different excitation spectrum for the composite as compared to the separate components, consistent with photo-excited charge transfer. A photoinduced electron spin resonance signal exhibits signatures of both the conducting polymer cation and the C(60) anion. Because the photoluminescence in the conducting polymer is quenched by interaction with C(60), the data imply that charge transfer from the excited state occurs on a picosecond time scale. The charge-separated state in composite films is metastable at low temperatures.

An overview of semiconductor photocatalysis

Abstract: The interest in heterogeneous photocatalysis is intense and increasing, as shown by the number of publications on this theme which regularly appear in this journal, and the fact that over 2000 papers have been published on this topic since 1981. This article is an overview of the field of semiconductor photocatalysis : a brief examination of its roots, achievements and possible future. The semiconductor titanium dioxide (TiO 2 ) features predominantly in past and present work on semiconductor photocatalysis; as a result, in the most of the examples selected in this overview to illustrate various points the semiconductor is TiO 2 .

Electronic Structure: Basic Theory and Practical Methods

Abstract: Preface Acknowledgements Notation Part I. Overview and Background Topics: 1. Introduction 2. Overview 3. Theoretical background 4. Periodic solids and electron bands 5. Uniform electron gas and simple metals Part II. Density Functional Theory: 6. Density functional theory: foundations 7. The Kohn-Sham ansatz 8. Functionals for exchange and correlation 9. Solving the Kohn-Sham equations Part III. Important Preliminaries on Atoms: 10. Electronic structure of atoms 11. Pseudopotentials Part IV. Determination of Electronic Structure, The Three Basic Methods: 12. Plane waves and grids: basics 13. Plane waves and grids: full calculations 14. Localized orbitals: tight binding 15. Localized orbitals: full calculations 16. Augmented functions: APW, KKR, MTO 17. Augmented functions: linear methods Part V. Predicting Properties of Matter from Electronic Structure - Recent Developments: 18. Quantum molecular dynamics (QMD) 19. Response functions: photons, magnons ... 20. Excitation spectra and optical properties 21. Wannier functions 22. Polarization, localization and Berry's phases 23. Locality and linear scaling O (N) methods 24. Where to find more Appendixes References Index.