Bernard Dieny

Bio: Bernard Dieny is an academic researcher from University of Grenoble. The author has contributed to research in topics: Magnetization & Tunnel magnetoresistance. The author has an hindex of 59, co-authored 433 publications receiving 15833 citations. Previous affiliations of Bernard Dieny include South Texas College & IBM.

Giant magnetoresistive in soft ferromagnetic multilayers.

Abstract: We show that the in-plane magnetoresistance of sandwiches of uncoupled ferromagnetic (${\mathrm{Ni}}_{81}$${\mathrm{Fe}}_{19}$,${\mathrm{Ni}}_{80}$${\mathrm{Co}}_{20}$,Ni) layers separated by ultrathin nonmagnetic metallic (Cu,Ag,Au) layers is strongly increased when the magnetizations of the two ferromagnetic layers are aligned antiparallel. Using NiFe layers, we report a relative change of resistance of 5.0% in 10 Oe at room temperature. The comparison between different ferromagnetic materials (alloys or pure elements) leads us to emphasize the role of bulk rather than interfacial spin-dependent scattering in these structures, in contrast to Fe/Cr multilayers.

Spin-torque oscillator using a perpendicular polarizer and a planar free layer

Abstract: Spintronics materials have recently been considered for radio-frequency devices such as oscillators by exploiting the transfer of spin angular momentum between a spin-polarized electrical current and the magnetic nanostructure it passes through. While previous spin-transfer oscillators (STOs) were based on in-plane magnetized structures, here we present the realization of an STO that contains a perpendicular spin current polarizer combined with an in-plane magnetized free layer. This device is characterized by high-frequency oscillations of the free-layer magnetization, consistent with out-of-plane steady-state precessions induced at the threshold current by a spin-transfer torque from perpendicularly polarized electrons. The results are summarized in static and dynamic current-field state diagrams and will be of importance for the design of STOs with enhanced output signals.

First-principles investigation of the very large perpendicular magnetic anisotropy at Fe|MgO and Co|MgO interfaces

Abstract: The perpendicular magnetic anisotropy (PMA) arising at the interface between ferromagnetic transition metals and metallic oxides was investigated via first-principles calculations. In this work very large values of PMA, up to 3 erg/cm${}^{2}$, at Fe$|$MgO interfaces are reported, in agreement with recent experiments. The origin of PMA is attributed to overlap between O-${p}_{z}$ and transition metal ${d}_{{z}^{2}}$ orbitals hybridized with ${d}_{xz(yz)}$ orbitals with stronger spin-orbit coupling-induced splitting around the Fermi level for perpendicular magnetization orientation. Furthermore, it is shown that the PMA value weakens in the case of over- or underoxidation due to the fact that oxygen ${p}_{z}$ and transition metal ${d}_{{z}^{2}}$ orbital overlap is strongly affected by disorder, in agreement with experimental observations in magnetic tunnel junctions.

Creep and Flow Regimes of Magnetic Domain-Wall Motion in Ultrathin Pt / Co / Pt Films with Perpendicular Anisotropy

Abstract: We report on magnetic domain-wall velocity measurements in ultrathin $\mathrm{Pt}/\mathrm{Co}(0.5--0.8\text{ }\text{ }\mathrm{nm})/\mathrm{Pt}$ films with perpendicular anisotropy over a large range of applied magnetic fields. The complete velocity-field characteristics are obtained, enabling an examination of the transition between thermally activated creep and viscous flow: motion regimes predicted from general theories for driven elastic interfaces in weakly disordered media. The dissipation limited flow regime is found to be consistent with precessional domain-wall motion, analysis of which yields values for the damping parameter, $\ensuremath{\alpha}$.

Spintronics: a spin-based electronics vision for the future.

Abstract: This review describes a new paradigm of electronics based on the spin degree of freedom of the electron. Either adding the spin degree of freedom to conventional charge-based electronic devices or using the spin alone has the potential advantages of nonvolatility, increased data processing speed, decreased electric power consumption, and increased integration densities compared with conventional semiconductor devices. To successfully incorporate spins into existing semiconductor technology, one has to resolve technical issues such as efficient injection, transport, control and manipulation, and detection of spin polarization as well as spin-polarized currents. Recent advances in new materials engineering hold the promise of realizing spintronic devices in the near future. We review the current state of the spin-based devices, efforts in new materials fabrication, issues in spin transport, and optical spin manipulation.

Spintronics: Fundamentals and applications

Abstract: Spintronics, or spin electronics, involves the study of active control and manipulation of spin degrees of freedom in solid-state systems. This article reviews the current status of this subject, including both recent advances and well-established results. The primary focus is on the basic physical principles underlying the generation of carrier spin polarization, spin dynamics, and spin-polarized transport in semiconductors and metals. Spin transport differs from charge transport in that spin is a nonconserved quantity in solids due to spin-orbit and hyperfine coupling. The authors discuss in detail spin decoherence mechanisms in metals and semiconductors. Various theories of spin injection and spin-polarized transport are applied to hybrid structures relevant to spin-based devices and fundamental studies of materials properties. Experimental work is reviewed with the emphasis on projected applications, in which external electric and magnetic fields and illumination by light will be used to control spin and charge dynamics to create new functionalities not feasible or ineffective with conventional electronics.

Thousandfold Change in Resistivity in Magnetoresistive La-Ca-Mn-O Films

Abstract: A negative isotropic magnetoresistance effect more than three orders of magnitude larger than the typical giant magnetoresistance of some superlattice films has been observed in thin oxide films of perovskite-like La0.67Ca0.33MnOx. Epitaxial films that are grown on LaAIO3 substrates by laser ablation and suitably heat treated exhibit magnetoresistance values as high as 127,000 percent near 77 kelvin and ∼1300 percent near room temperature. Such a phenomenon could be useful for various magnetic and electric device applications if the observed effects of material processing are optimized. Possible mechanisms for the observed effect are discussed.

A perpendicular-anisotropy CoFeB–MgO magnetic tunnel junction

Abstract: Magnetic tunnel junctions (MTJs) with ferromagnetic electrodes possessing a perpendicular magnetic easy axis are of great interest as they have a potential for realizing next-generation high-density non-volatile memory and logic chips with high thermal stability and low critical current for current-induced magnetization switching. To attain perpendicular anisotropy, a number of material systems have been explored as electrodes, which include rare-earth/transition-metal alloys, L1(0)-ordered (Co, Fe)-Pt alloys and Co/(Pd, Pt) multilayers. However, none of them so far satisfy high thermal stability at reduced dimension, low-current current-induced magnetization switching and high tunnel magnetoresistance ratio all at the same time. Here, we use interfacial perpendicular anisotropy between the ferromagnetic electrodes and the tunnel barrier of the MTJ by employing the material combination of CoFeB-MgO, a system widely adopted to produce a giant tunnel magnetoresistance ratio in MTJs with in-plane anisotropy. This approach requires no material other than those used in conventional in-plane-anisotropy MTJs. The perpendicular MTJs consisting of Ta/CoFeB/MgO/CoFeB/Ta show a high tunnel magnetoresistance ratio, over 120%, high thermal stability at dimension as low as 40 nm diameter and a low switching current of 49 microA.

Ferromagnetic materials

Abstract: In this chapter, we will restrict our attention to the ferrites and a few other closely related materials. The great interest in ferrites stems from their unique combination of a spontaneous magnetization and a high electrical resistivity. The observed magnetization results from the difference in the magnetizations of two non-equivalent sub-lattices of the magnetic ions in the crystal structure. Materials of this type should strictly be designated as “ferrimagnetic” and in some respects are more closely related to anti-ferromagnetic substances than they are to ferromagnetics in which the magnetization results from the parallel alignment of all the magnetic moments present. We shall not adhere to this special nomenclature except to emphasize effects, which are due to the existence of the sub-lattices.