Bilal Janjua

Bio: Bilal Janjua is an academic researcher from University of Toronto. The author has contributed to research in topics: Nanowire & Light-emitting diode. The author has an hindex of 16, co-authored 62 publications receiving 1252 citations. Previous affiliations of Bilal Janjua include King Abdullah University of Science and Technology.

4.8 Gbit/s 16-QAM-OFDM transmission based on compact 450-nm laser for underwater wireless optical communication

Abstract: We experimentally demonstrate an underwater wireless optical communications (UWOC) employing 450-nm TO-9 packaged and fiber-pigtailed laser diode (LD) directly encoded with an orthogonal frequency division multiplexed quadrature amplitude modulation (QAM-OFDM) data. A record data rate of up to 4.8 Gbit/s over 5.4-m transmission distance is achieved. By encoding the full 1.2-GHz bandwidth of the 450-nm LD with a 16-QAM-OFDM data, an error vector magnitude (EVM) of 16.5%, a signal-to-noise ratio (SNR) of 15.63 dB and a bit error rate (BER) of 2.6 × 10(-3), well pass the forward error correction (FEC) criterion, were obtained.

Going beyond 4 Gbps data rate by employing RGB laser diodes for visible light communication

Abstract: With increasing interest in visible light communication, the laser diode (LD) provides an attractive alternative, with higher efficiency, shorter linewidth and larger bandwidth for high-speed visible light communication (VLC) Previously, more than 3 Gbps data rate was demonstrated using LED By using LDs and spectral-efficient orthogonal frequency division multiplexing encoding scheme, significantly higher data rates has been achieved in this work Using 16-QAM modulation scheme, in conjunction with red, blue and green LDs, data rates of 44 Gbps, 4 Gbps and 4 Gbps, with the corresponding BER/SNR/EVM of 33 × 10−3/153/179, 14 × 10−3/163/154 and 28 × 10−3/155/167were obtained over transmission distance of ~20 cm We also simultaneously demonstrated white light emission using red, blue and green LDs, after passing through a commercially available diffuser element Our work highlighted that a tradeoff exists in operating the blue LDs at optimum bias condition while maintaining good color temperature The best results were obtained when encoding red LDs which gave both the strongest received signal amplitude and white light with CCT value of 5835K

2 Gbit/s data transmission from an unfiltered laser-based phosphor-converted white lighting communication system.

Abstract: We demonstrate data transmission of unfiltered white light generated by direct modulation of a blue gallium nitride (GaN) laser diode (LD) exciting YAG:Ce phosphors. 1.1 GHz of modulation bandwidth was measured without a limitation from the slow 3.8 MHz phosphor response. A high data transmission rate of 2 Gbit/s was achieved without an optical blue-filter using a non-return-to-zero on-off keying (NRZ-OOK) modulation scheme. The measured bit error rate (BER) of 3.50 × 10(-3) was less than the forward error correction (FEC) limit of 3.8 × 10(-3). The generated white light exhibits CIE 1931 chromaticity coordinates of (0.3628, 0.4310) with a color rendering index (CRI) of 58 and a correlated color temperature (CCT) of 4740 K when the LD was operated at 300 mA. The demonstrated laser-based lighting system can be used simultaneously for indoor broadband access and illumination applications with good color stability.

Droop-Free, Reliable, and High-Power InGaN/GaN Nanowire Light-Emitting Diodes for Monolithic Metal-Optoelectronics

Abstract: A droop-free nitride light-emitting diode (LED) with the capacity to operate beyond the “green gap” has been a subject of intense scientific and engineering interest. While several properties of nanowires on silicon make them promising for use in LED development, the high aspect ratio of individual nanowires and their laterally discontinuous features limit phonon transport and device performance. Here, we report on the monolithic integration of metal heat-sink and droop-free InGaN/GaN quantum-disks-in-nanowire LEDs emitting at ∼710 nm. The reliable operation of our uncooled nanowire-LEDs (NW-LEDs) epitaxially grown on molybdenum was evident in the constant-current soft burn-in performed on a 380 μm × 380 μm LED. The square LED sustained 600 mA electrical stress over an 8 h period, providing stable light output at maturity without catastrophic failure. The absence of carrier and phonon transport barriers in NW-LEDs was further inferred from current-dependent Raman measurements (up to 700 mA), which reveale...

4-Gbit/s visible light communication link based on 16-QAM OFDM transmission over remote phosphor-film converted white light by using blue laser diode

Abstract: Visible Light Communication (VLC) as a new technology for ultrahigh-speed communication is still limited when using slow modulation light-emitting diode (LED). Alternatively, we present a 4-Gbit/s VLC system using coherent blue-laser diode (LD) via 16-quadrature amplitude modulation orthogonal frequency division multiplexing. By changing the composition and the optical-configuration of a remote phosphor-film the generated white light is tuned from cool day to neutral, and the bit error rate is optimized from 1.9 × 10(-2) to 2.8 × 10(-5) in a blue filter-free link due to enhanced blue light transmission in forward direction. Briefly, blue-LD is an alternative to LED for generating white light and boosting the data rate of VLC.

A review of Ga2O3 materials, processing, and devices

Abstract: Gallium oxide (Ga2O3) is emerging as a viable candidate for certain classes of power electronics, solar blind UV photodetectors, solar cells, and sensors with capabilities beyond existing technologies due to its large bandgap. It is usually reported that there are five different polymorphs of Ga2O3, namely, the monoclinic (β-Ga2O3), rhombohedral (α), defective spinel (γ), cubic (δ), or orthorhombic (e) structures. Of these, the β-polymorph is the stable form under normal conditions and has been the most widely studied and utilized. Since melt growth techniques can be used to grow bulk crystals of β-GaO3, the cost of producing larger area, uniform substrates is potentially lower compared to the vapor growth techniques used to manufacture bulk crystals of GaN and SiC. The performance of technologically important high voltage rectifiers and enhancement-mode Metal-Oxide Field Effect Transistors benefit from the larger critical electric field of β-Ga2O3 relative to either SiC or GaN. However, the absence of clear demonstrations of p-type doping in Ga2O3, which may be a fundamental issue resulting from the band structure, makes it very difficult to simultaneously achieve low turn-on voltages and ultra-high breakdown. The purpose of this review is to summarize recent advances in the growth, processing, and device performance of the most widely studied polymorph, β-Ga2O3. The role of defects and impurities on the transport and optical properties of bulk, epitaxial, and nanostructures material, the difficulty in p-type doping, and the development of processing techniques like etching, contact formation, dielectrics for gate formation, and passivation are discussed. Areas where continued development is needed to fully exploit the properties of Ga2O3 are identified.

Underwater Optical Wireless Communication

Abstract: Underwater wireless information transfer is of great interest to the military, industry, and the scientific community, as it plays an important role in tactical surveillance, pollution monitoring, oil control and maintenance, offshore explorations, climate change monitoring, and oceanography research. In order to facilitate all these activities, there is an increase in the number of unmanned vehicles or devices deployed underwater, which require high bandwidth and high capacity for information transfer underwater. Although tremendous progress has been made in the field of acoustic communication underwater, however, it is limited by bandwidth. All this has led to the proliferation of underwater optical wireless communication (UOWC), as it provides higher data rates than the traditional acoustic communication systems with significantly lower power consumption and simpler computational complexities for short-range wireless links. UOWC has many potential applications ranging from deep oceans to coastal waters. However, the biggest challenge for underwater wireless communication originates from the fundamental characteristics of ocean or sea water; addressing these challenges requires a thorough understanding of complex physio-chemical biological systems. In this paper, the main focus is to understand the feasibility and the reliability of high data rate underwater optical links due to various propagation phenomena that impact the performance of the system. This paper provides an exhaustive overview of recent advances in UOWC. Channel characterization, modulation schemes, coding techniques, and various sources of noise which are specific to UOWC are discussed. This paper not only provides exhaustive research in underwater optical communication but also aims to provide the development of new ideas that would help in the growth of future underwater communication. A hybrid approach to an acousto-optic communication system is presented that complements the existing acoustic system, resulting in high data rates, low latency, and an energy-efficient system.

A Survey of Underwater Optical Wireless Communications

Abstract: Underwater wireless communications refer to data transmission in unguided water environment through wireless carriers, i.e., radio-frequency (RF) wave, acoustic wave, and optical wave. In comparison to RF and acoustic counterparts, underwater optical wireless communication (UOWC) can provide a much higher transmission bandwidth and much higher data rate. Therefore, we focus, in this paper, on the UOWC that employs optical wave as the transmission carrier. In recent years, many potential applications of UOWC systems have been proposed for environmental monitoring, offshore exploration, disaster precaution, and military operations. However, UOWC systems also suffer from severe absorption and scattering introduced by underwater channels. In order to overcome these technical barriers, several new system design approaches, which are different from the conventional terrestrial free-space optical communication, have been explored in recent years. We provide a comprehensive and exhaustive survey of the state-of-the-art UOWC research in three aspects: 1) channel characterization; 2) modulation; and 3) coding techniques, together with the practical implementations of UOWC.

Micro-light-emitting diodes with quantum dots in display technology

Abstract: Micro-light-emitting diodes (μ-LEDs) are regarded as the cornerstone of next-generation display technology to meet the personalised demands of advanced applications, such as mobile phones, wearable watches, virtual/augmented reality, micro-projectors and ultrahigh-definition TVs. However, as the LED chip size shrinks to below 20 μm, conventional phosphor colour conversion cannot present sufficient luminance and yield to support high-resolution displays due to the low absorption cross-section. The emergence of quantum dot (QD) materials is expected to fill this gap due to their remarkable photoluminescence, narrow bandwidth emission, colour tuneability, high quantum yield and nanoscale size, providing a powerful full-colour solution for μ-LED displays. Here, we comprehensively review the latest progress concerning the implementation of μ-LEDs and QDs in display technology, including μ-LED design and fabrication, large-scale μ-LED transfer and QD full-colour strategy. Outlooks on QD stability, patterning and deposition and challenges of μ-LED displays are also provided. Finally, we discuss the advanced applications of QD-based μ-LED displays, showing the bright future of this technology. Micrometre-sized light-emitting diodes (LEDs) based on quantum dots (QDs) will propel the next generation of display technologies, a review by leading researchers shows. Conventional LED designs, with phosphor coatings that convert light to different colours, are difficult to make smaller than 20 micrometres. Jr-Hau He at City University of Hong Kong and co-workers explain how this problem can be tackled using QDs, tiny particles whose optical properties can be tuned by varying their size, providing brighter and more precise colours. Ultra-high-resolution displays based on phospholuminescent QD-LEDs are now being released to the market thanks to finely-controlled methods for synthesising QDs and depositing them onto films. Further research should focus on the best ways to stabilise and protect QD films within LEDs, and to continue developing electroluminescent QD-LEDs, which could potentially outperform their phospholuminescent cousins.

Underwater Optical Wireless Communications, Networking, and Localization: A Survey

Abstract: Underwater wireless communications can be carried out through acoustic, radio frequency (RF), and optical waves. Compared to its bandwidth limited acoustic and RF counterparts, underwater optical wireless communications (UOWCs) can support higher data rates at low latency levels. However, the severe aquatic channel conditions (e.g., absorption, scattering, turbulence, etc.) pose great challenges for UOWCs and significantly reduce the attainable communication ranges, which necessitates efficient networking and localization solutions. Therefore, we provide a comprehensive survey on the challenges, advances, and prospects of underwater optical wireless networks (UOWNs) from a layer by layer perspective which includes: (1) Physical layer issues including propagation characteristics, channel modeling, and modulation techniques (2) Data link layer problems covering link configurations, link budgets, performance metrics, and multiple access schemes; (3) Network layer topics containing relaying techniques and potential routing algorithms; (4) Transport layer subjects such as connectivity, reliability, flow and congestion control; (5) Application layer goals, and (6) Localization and its impacts on UOWN layers. Finally, we outline the open research challenges and point out the prospective directions for underwater optical wireless communications, networking, and localization studies.