Bimal K. Bose

Bio: Bimal K. Bose is an academic researcher from University of Tennessee. The author has contributed to research in topics: Power electronics & Induction motor. The author has an hindex of 58, co-authored 189 publications receiving 15837 citations. Previous affiliations of Bimal K. Bose include Rensselaer Polytechnic Institute & General Electric.

Modern Power Electronics And Ac Drives

Abstract: (NOTE: Each chapter begins with an Introduction and concludes with a Summary and References.) Preface. List of Principal Symbols. 1. Power Semiconductor Devices. Diodes. Thyristors. Triacs. Gate Turn-Off Thyristors (GTOs). Bipolar Power or Junction Transistors (BPTs or BJTs). Power MOSFETs. Static Induction Transistors (SITs). Insulated Gate Bipolar Transistors (IGBTs). MOS-Controlled Thyristors (MCTs). Integrated Gate-Commutated Thyristors (IGCTs). Large Band-Gap Materials for Devices. Power Integrated Circuits (PICs). 2. AC Machines for Drives. Induction Machines. Synchronous Machines. Variable Reluctance Machine (VRM). 3. Diodes and Phase-Controlled Converters. Diode Rectifiers. Thyristor Converters. Converter Control. EMI and Line Power Quality Problems. 4. Cycloconverters. Phase-Controlled Cycloconverters. Matrix Converters. High-Frequency Cycloconverters. 5. Voltage-Fed Converters. Single-Phase Inverters. Three-Phase Bridge Inverters. Multi-Stepped Inverters. Pulse Width Modulation Techniques. Three-Level Inverters. Hard Switching Effects. Resonant Inverters. Soft-Switched Inverters. Dynamic and Regenerative Drive Braking. PWM Rectifiers. Static VAR Compensators and Active Harmonic Filters. Introduction to Simulation-MATLAB/SIMULINK. 6. Current-Fed Converters. General Operation of a Six-Step Thyristor Inverter. Load-Commutated Inverters. Force-Commutated Inverters. Harmonic Heating and Torque Pulsation. Multi-Stepped Inverters. Inverters with Self-Commutated Devices. Current-Fed vs Voltage-Fed Converters. 7. Induction Motor Slip-Power Recovery Drives. Doubly-Fed Machine Speed Control by Rotor Rheostat. Static Kramer Drive. Static Scherius Drive. 8. Control and Estimation of Induction Motor Drives. Induction Motor Control with Small Signal Model. Scalar Control. Vector or Field-Oriented Control. Sensorless Vector Control. Direct Torque and Flux Control (DTC). Adaptive Control. Self-Commissioning of Drive. 9. Control and Estimation of Synchronous Motor Drives. Sinusoidal SPM Machine Drives. Synchronous Reluctance Machine Drives. Sinusoidal IPM Machine Drives. Trapezoidal SPM Machine Drives. Wound-Field Synchronous Machine Drives. Sensorless Control. Switched Reluctance Motor (SRM) Drives. 10. Expert System Principles and Applications. Expert System Principles. Expert System Shell. Design Methodology. Applications. Glossary. 11. Fuzzy Logic Principles and Applications. Fuzzy Sets. Fuzzy System. Fuzzy Control. General Design Methodology. Applications. Fuzzy Logic Toolbox. Glossary. 12. Neural Network Principles and Applications. The Structure of a Neuron. Artificial Neural Network. Other Networks. Neural Network in Identification and Control. General Design Methodology. Applications. Neuro-Fuzzy Systems. Demo Program with Neural Network Toolbox. Glossary. Index.

Power Electronics and Ac Drives

Abstract: An integrated treatment of technological advances in power electronics Add this article to private library Remove from private library Submit corrections to this record View record in the new ADS and ac drives is presented. The topics include: power semiconductor devices, ac machines, phase-controlled converters and cycloconverters, voltage-fed inverter drives, current-fed inverter drives, slip powercontrolled drives, control of induction and synchronous machines, and microcomputer control. Both practical and theoretical aspects of the technology are addressed, and numerical examples are given. Bibtex entry for this abstract Preferred format for this abstract

An adaptive hysteresis-band current control technique of a voltage-fed PWM inverter for machine drive system

Abstract: An adaptive hysteresis-band control method where the band is modulated with the system parameters to maintain the modulation frequency to be nearly constant is described. Although the technique is applicable to general AC motor drives and other types of load, an interior permanent magnet (IPM) synchronous machine load is considered. Systematic analytical expressions of the hysteresis band are derived as functions of system parameters. An IPM machine drive system with a voltage-fed current-controlled PWM (pulse width modulation) inverter has been computer simulated to study the performance of the proposed method. >

Fuzzy logic based intelligent control of a variable speed cage machine wind generation system

Abstract: The paper describes a variable speed wind generation system where fuzzy logic principles are used for efficiency optimization and performance enhancement control. A squirrel cage induction generator feeds the power to a double-sided pulse width modulated converter system which pumps power to a utility grid or can supply to an autonomous system. The generation system has fuzzy logic control with vector control in the inner loops. A fuzzy controller tracks the generator speed with the wind velocity to extract the maximum power. A second fuzzy controller programs the machine flux for light load efficiency improvement, and a third fuzzy controller gives robust speed control against wind gust and turbine oscillatory torque. The complete control system has been developed, analyzed, and validated by simulation study. Performances have then been evaluated in detail.

Global Warming: Energy, Environmental Pollution, and the Impact of Power Electronics

Abstract: Global energy consumption is dramatically increasing due to our quest for a higher standard of living and the increasing world population. Most of our energy comes from fossil fuels, and burning these fuels causes environmental problems, and in particular, the global warming problem. Global warming raises the sea level; brings drought in tropical regions near the equator; increases hurricanes, tornadoes, and floods; and causes the spread of diseases. The consequences are serious and have the potential to bring tremendous unrest in the world. Various measures to solve or mitigate the global warming problem have been outlined in this article. This article particularly highlights the impact of power electronics in solving this problem. Power electronics will play a very important role in clean energy generation, bulk storage of electricity, and efficient energy utilization, and eventually, it will be a key element in the energy policies of nations. It has been estimated that the widespread energy efficiency improvement by power electronics and other methods with the existing technologies can save 20% of the global energy demand, and another 20% can be saved by preventing waste, i.e., by various conservation methods. Finally, the global warming problem is solvable by the united effort of humanity.

Overview of Control and Grid Synchronization for Distributed Power Generation Systems

Abstract: Renewable energy sources like wind, sun, and hydro are seen as a reliable alternative to the traditional energy sources such as oil, natural gas, or coal. Distributed power generation systems (DPGSs) based on renewable energy sources experience a large development worldwide, with Germany, Denmark, Japan, and USA as leaders in the development in this field. Due to the increasing number of DPGSs connected to the utility network, new and stricter standards in respect to power quality, safe running, and islanding protection are issued. As a consequence, the control of distributed generation systems should be improved to meet the requirements for grid interconnection. This paper gives an overview of the structures for the DPGS based on fuel cell, photovoltaic, and wind turbines. In addition, control structures of the grid-side converter are presented, and the possibility of compensation for low-order harmonics is also discussed. Moreover, control strategies when running on grid faults are treated. This paper ends up with an overview of synchronization methods and a discussion about their importance in the control

Recent Advances and Industrial Applications of Multilevel Converters

Abstract: Multilevel converters have been under research and development for more than three decades and have found successful industrial application. However, this is still a technology under development, and many new contributions and new commercial topologies have been reported in the last few years. The aim of this paper is to group and review these recent contributions, in order to establish the current state of the art and trends of the technology, to provide readers with a comprehensive and insightful review of where multilevel converter technology stands and is heading. This paper first presents a brief overview of well-established multilevel converters strongly oriented to their current state in industrial applications to then center the discussion on the new converters that have made their way into the industry. In addition, new promising topologies are discussed. Recent advances made in modulation and control of multilevel converters are also addressed. A great part of this paper is devoted to show nontraditional applications powered by multilevel converters and how multilevel converters are becoming an enabling technology in many industrial sectors. Finally, some future trends and challenges in the further development of this technology are discussed to motivate future contributions that address open problems and explore new possibilities.

Instantaneous Reactive Power Compensators Comprising Switching Devices without Energy Storage Components

Abstract: The conventional reactive power in single-phase or three- phase circuits has been defined on the basis of the average value concept for sinusoidal voltage and current waveforms in steady states. The instantaneous reactive power in three-phase circuits is defined on the basis of the instantaneous value concept for arbitrary voltage and current waveforms, including transient states. A new instantaneous reactive power compensator comprising switching devices is proposed which requires practically no energy storage components.

Z-source inverter

Abstract: This paper presents an impedance-source (or impedance-fed) power converter (abbreviated as Z-source converter) and its control method for implementing DC-to-AC, AC-to-DC, AC-to-AC, and DC-to-DC power conversion. The Z-source converter employs a unique impedance network (or circuit) to couple the converter main circuit to the power source, thus providing unique features that cannot be obtained in the traditional voltage-source (or voltage-fed) and current-source (or current-fed) converters where a capacitor and inductor are used, respectively. The Z-source converter overcomes the conceptual and theoretical barriers and limitations of the traditional voltage-source converter (abbreviated as V-source converter) and current-source converter (abbreviated as I-source converter) and provides a novel power conversion concept. The Z-source concept can be applied to all DC-to-AC, AC-to-DC, AC-to-AC, and DC-to-DC power conversion. To describe the operating principle and control, this paper focuses on an example: a Z-source inverter for DC-AC power conversion needed in fuel cell applications. Simulation and experimental results are presented to demonstrate the new features.

Current control techniques for three-phase voltage-source PWM converters: a survey

Abstract: The aim of this paper is to present a review of current control techniques for three-phase voltage-source pulsewidth modulated converters. Various techniques, different in concept, have been described in two main groups: linear and nonlinear. The first includes proportional integral (stationary and synchronous) and state feedback controllers, and predictive techniques with constant switching frequency. The second comprises bang-bang (hysteresis, delta modulation) controllers and predictive controllers with on-line optimization. New trends in current control-neural networks and fuzzy-logic-based controllers-are discussed, as well. Selected oscillograms accompany the presentation in order to illustrate properties of the described controller groups.