Bin Huang

Bio: Bin Huang is an academic researcher from Northwestern Polytechnical University. The author has contributed to research in topics: Microstructure & Alloy. The author has an hindex of 19, co-authored 89 publications receiving 1108 citations.

Precipitation process along dislocations in Al-Cu-Mg alloy during artificial aging

Abstract: The heterogeneous nucleation and growth of precipitates at dislocations in Al–Cu–Mg alloy were investigated by examining sample aged at 195 °C for various times from 10 min to 9 h. High resolution transmission electron microscopy (HRTEM) observations and electron energy loss spectrometers (EELS) analysis show that the precipitation sequence of the S (Al 2 CuMg) phase along dislocations should be SSS → GPB zones → S (Type I) → S (Type I) + S (Type II). Type II S precipitate can nucleate and grow separately at some dislocation parts which are unfavorable for Type I S precipitate formation, or can transit from Type I S precipitate during lateral growth along dislocations by means of continuous or stepped changing in lattice orientations. Both of these modes are accomplished under the action of dislocation strain field. The deviation extent of Type II S precipitate is considered not changing with time but closely related with the interactions between the transformation strain during nucleation and the dislocation strain field.

Crystal substructures of the rotation-twinned T (Al20Cu2Mn3) phase in 2024 aluminum alloy

Abstract: The substructures in rotation-twinned T (Al 20 Cu 2 Mn 3 ) particles were investigated by means of high resolution transmission electron microscopy (HRTEM) and high angle annular dark field scanning transmission electron microscopy (HAADF-STEM) in the present work. A flattened hexagonal structural subunit with 20 atomic columns was proposed. The stacking mode of these subunits in non-defective T phase was proved to be tessellation of many flattened hexagonal subunits with the same orientations, while the stacking modes near anti-phase boundary (APB) and twin boundary (TB) were tessellations of two differently oriented flattened hexagonal subunits. The transition region at twin domain junctions has hybrid structure and perfect or imperfect pentagram structure. Centered with the perfect pentagram transition structure, a rotation twin with ten fan-shaped domains and constituted by five twin variants can be deduced.

Nano-scale precipitate evolution and mechanical properties of 7085 aluminum alloy during thermal exposure

Abstract: As a new generation of Al-Zn-Mg-Cu alloy, 7085 aluminum alloy is a promising structural material in the field of aerospace industry. However, research on its thermal stability is still lacking. In the present work, thermal exposure was carried out on the T7452-treated 7085 aluminum alloy under different temperatures (100 °C, 125 °C, 150 °C and 175 °C) for 500 h. Variations of tensile properties and hardness were exhibited. The microstructure, nano-scale precipitates and fracture characteristics of the alloy were investigated using optical microscopy (OM), scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The results show that with the increase of exposure temperature, the strength and hardness increase first and then decrease while the elongation and the reduction of area increase continuously as compared to those of the non-thermal exposed alloy. The transformation from η′ phase to η phase during thermal exposure occurs continuously during thermal exposure. In addition, as the exposure temperature increases, the average dimensions of precipitates and the average spacing of neighbor precipitates become larger. The influence of precipitates on mechanical properties of the alloy is discussed.

Variant selection and the strengthening effect of S precipitates at dislocations in Al-Cu-Mg alloy

Abstract: The heterogeneous precipitation of the S (Al2CuMg) phase along dislocations is investigated using high-resolution transmission electron microscopy various configurations of the S precipitate group form according to the initial dislocation morphology and no more than two S variants coexist along a single dislocation line. The most favorable combination of two S variants is observed to be variants 1 and 4 (or variants 2 and 3), and the variant selection criterion for S precipitate with the classic orientation relationship is proved to be that the dislocation line direction lies in the habit plane of the precipitate. The contribution of S precipitate groups to strengthening is evaluated by comparing the difference in total system energy increment induced by precipitate loop and the equivalent number of Guinier–Preston–Bagaryatsky zones and discrete S particles during plastic deformation. The results show that the average size of the precipitate loops as well as other kinds of precipitate groups has an important influence on the final strengthening effect. By keeping the precipitate groups below a critical size and increasing their density, the strength and thermal stability of the alloy are expected to be improved.

Investigation of interfacial reaction in SiC fiber reinforced Ti–43Al–9V composites

Abstract: SiC fiber reinforced titanium aluminides matrix composites based on TiAl (Ti–43Al–9V) were fabricated by means of matrix-coated fiber method through hot isostatic pressing. Microstructure of the SiCf/Ti–43Al–9V interfacial reaction zone in the composites was identified by means of scanning electron microscopy and transmission electron microscopy. The results show that three types of reaction products TiC, Ti2AlC and (Ti,V)5(Si,Al)3 are formed between carbon coating of SiC fiber and the matrix. TiC is adjacent to the carbon coating of the SiC fiber, and (Ti,V)5(Si,Al)3 is close to the matrix. Ti2AlC layer exists as columnar grains between TiC and (Ti,V)5(Si,Al)3 layers. The TiC layer can be divided into fine-grained layer and coarse-grained layer. The fine-grained TiC layer contains amorphous carbon, and the coarse-grained TiC layer is separated from fine-grained TiC by an intermittent carbon layer. In addition, TiC particles are also formed between carbon coating and SiC. Furthermore, the formation mechanism of the interfacial reaction products was discussed.

Fast parallel algorithms for short-range molecular dynamics

Abstract: Three parallel algorithms for classical molecular dynamics are presented. The first assigns each processor a fixed subset of atoms; the second assigns each a fixed subset of inter-atomic forces to compute; the third assigns each a fixed spatial region. The algorithms are suitable for molecular dynamics models which can be difficult to parallelize efficiently—those with short-range forces where the neighbors of each atom change rapidly. They can be implemented on any distributed-memory parallel machine which allows for message-passing of data between independently executing processors. The algorithms are tested on a standard Lennard-Jones benchmark problem for system sizes ranging from 500 to 100,000,000 atoms on several parallel supercomputers--the nCUBE 2, Intel iPSC/860 and Paragon, and Cray T3D. Comparing the results to the fastest reported vectorized Cray Y-MP and C90 algorithm shows that the current generation of parallel machines is competitive with conventional vector supercomputers even for small problems. For large problems, the spatial algorithm achieves parallel efficiencies of 90% and a 1840-node Intel Paragon performs up to 165 faster than a single Cray C9O processor. Trade-offs between the three algorithms and guidelines for adapting them to more complex molecular dynamics simulations are also discussed.

The Diffusion of Solids

Abstract: IN view of the interest attaching to the vaporisation and diffusion of solids, the following observations may be worthy of record.

A selective laser melting and solution heat treatment refined Al-12Si alloy with a controllable ultrafine eutectic microstructure and 25% tensile ductility

Abstract: This study shows that a eutectic Al–12Si alloy with controllable ultrafine microstructure and excellent mechanical properties can be achieved by using selective laser melting and subsequent solution heat treatment. This provides a novel and promising approach to the refinement of eutectic Al–Si alloys. Unlike Al–12Si alloys fabricated and refined by traditional methods, the as-fabricated Al–12Si in this study contains nano-sized spherical Si particles surrounding a supersaturated Al matrix. During solution heat treatment, precipitation and coalescence of the Si particles occur, which decreases the Si concentration in the matrix and sub-micron to micron-sized spherical particles embedded in an Al matrix form. The as-fabricated Al–12Si exhibits significantly better tensile properties than the traditionally produced counterparts; while the solution treated Al–12Si has an extremely high ductility of approximately 25%. Importantly, the mechanical properties of the Al–12Si can be tailored through controlling the precipitation and coalescence of the Si particles by varying the solution heat treatment time. A detailed transmission electron microscopy study was conducted to investigate this Al–12Si alloy with ultrafine eutectic microstructure. The excellent tensile properties have been attributed to the refined eutectic microstructure containing spherical Si particles. The formation of this unique microstructure is due to the super heating and an extremely high cooling rate during selective laser melting and the subsequent solution heat treatment, which enables Si to grow along its most stable plane {1 1 1}Si.

Enhanced Mechanical Properties of Graphene (Reduced Graphene Oxide)/Aluminum Composites with a Bioinspired Nanolaminated Structure

Abstract: Bulk graphene (reduced graphene oxide)-reinforced Al matrix composites with a bioinspired nanolaminated microstructure were fabricated via a composite powder assembly approach. Compared with the unreinforced Al matrix, these composites were shown to possess significantly improved stiffness and tensile strength, and a similar or even slightly higher total elongation. These observations were interpreted by the facilitated load transfer between graphene and the Al matrix, and the extrinsic toughening effect as a result of the nanolaminated microstructure.

Titanium metal matrix composites: An overview

Abstract: Titanium matrix composites (TMCs) offer high specific strength and stiffness compared with steel and nickel-base materials. High-temperature TMCs can offer up to 50% weight reduction relative to monolithic superalloys while maintaining equivalent strength and stiffness in jet engine propulsion systems. Regardless of the reinforcements are continuous fibres or discontinuous particulates, the unique properties of TMCs have thrust them to the forefront of extensive research and development programmes around the world. Even though TMCs are one of the most studied and sought-after material systems, useful information about their properties, fabrication methods and design is scattered in the literature. This review covers important research work that has led to the advances in TMCs material systems. It also provides comprehensive details about common reinforcements, manufacturing processes, and reviews static and dynamic properties of some common TMCs. The review also presents common industrial applications of TMCs and highlights the promising outlook of TMCs.