Bin Wu

Bio: Bin Wu is an academic researcher from Chinese Academy of Sciences. The author has contributed to research in topics: Graphene & Chemical vapor deposition. The author has an hindex of 32, co-authored 65 publications receiving 4748 citations. Previous affiliations of Bin Wu include Trinity College, Dublin.

Mechanical properties of ultrahigh-strength gold nanowires

Abstract: Nanowires have attracted considerable interest as nanoscale interconnects and as the active components of both electronic and electromechanical devices. Nanomechanical measurements are a challenge, but remain key to the development and processing of novel nanowire-based devices. Here, we report a general method to measure the spectrum of nanowire mechanical properties based on nanowire bending under the lateral load from an atomic force microscope tip. We find that for Au nanowires, Young's modulus is essentially independent of diameter, whereas the yield strength is largest for the smallest diameter wires, with strengths up to 100 times that of bulk materials, and substantially larger than that reported for bulk nanocrystalline metals (BNMs)1,2,3,4,5. In contrast to BNMs, nanowire plasticity is characterized by strain-hardening, demonstrating that dislocation motion and pile-up is still operative down to diameters of 40 nm. Possible origins for the different mechanical properties of nanowires and BNMs are discussed.

Uniform hexagonal graphene flakes and films grown on liquid copper surface

Abstract: Unresolved problems associated with the production of graphene materials include the need for greater control over layer number, crystallinity, size, edge structure and spatial orientation, and a better understanding of the underlying mechanisms. Here we report a chemical vapor deposition approach that allows the direct synthesis of uniform single-layered, large-size (up to 10,000 μm2), spatially self-aligned, and single-crystalline hexagonal graphene flakes (HGFs) and their continuous films on liquid Cu surfaces. Employing a liquid Cu surface completely eliminates the grain boundaries in solid polycrystalline Cu, resulting in a uniform nucleation distribution and low graphene nucleation density, but also enables self-assembly of HGFs into compact and ordered structures. These HGFs show an average two-dimensional resistivity of 609 ± 200 Ω and saturation current density of 0.96 ± 0.15 mA/μm, demonstrating their good conductivity and capability for carrying high current density.

Oxygen-Aided Synthesis of Polycrystalline Graphene on Silicon Dioxide Substrates

Abstract: We report the metal-catalyst-free synthesis of high-quality polycrystalline graphene on dielectric substrates [silicon dioxide (SiO2) or quartz] using an oxygen-aided chemical vapor deposition (CVD) process The growth was carried out using a CVD system at atmospheric pressure After high-temperature activation of the growth substrates in air, high-quality polycrystalline graphene is subsequently grown on SiO2 by utilizing the oxygen-based nucleation sites The growth mechanism is analogous to that of growth for single-walled carbon nanotubes Graphene-modified SiO2 substrates can be directly used in transparent conducting films and field-effect devices The carrier mobilities are about 531 cm2 V–1 s–1 in air and 472 cm2 V–1 s–1 in N2, which are close to that of metal-catalyzed polycrystalline graphene The method avoids the need for either a metal catalyst or a complicated and skilled postgrowth transfer process and is compatible with current silicon processing techniques

Low temperature growth of highly nitrogen-doped single crystal graphene arrays by chemical vapor deposition.

Abstract: The ability to dope graphene is highly important for modulating electrical properties of graphene. However, the current route for the synthesis of N-doped graphene by chemical vapor deposition (CVD) method mainly involves high growth temperature using ammonia gas or solid reagent melamine as nitrogen sources, leading to graphene with low doping level, polycrystalline nature, high defect density and low carrier mobility. Here, we demonstrate a self-assembly approach that allows the synthesis of single-layer, single crystal and highly nitrogen-doped graphene domain arrays by self-organization of pyridine molecules on Cu surface at temperature as low as 300 °C. These N-doped graphene domains have a dominated geometric structure of tetragonal-shape, reflecting the single crystal nature confirmed by electron-diffraction measurements. The electrical measurements of these graphene domains showed their high carrier mobility, high doping level, and reliable N-doped behavior in both air and vacuum.

Microstructure-hardened silver nanowires.

Abstract: To exploit the novel size-dependent mechanical properties of nanowires, it is necessary for one to develop strategies to control the strength and toughness of these materials. Here, we report on the mechanical properties of silver nanowires with a unique fivefold twin structure using a lateral force atomic force microscopy (AFM) method in which wires are held in a double-clamped beam configuration. Force-displacement curves exhibit super elastic behavior followed by unexpected brittle failure without significant plastic deformation. Thermal annealing resulted in a gradual transition to weaker, more ductile materials associated with the elimination of the twinned boundary structure. These results point to the critical roles of microstructure and confinement in engineering the mechanical properties of nanoscale materials.

Highly Stretchable and Sensitive Strain Sensor Based on Silver Nanowire–Elastomer Nanocomposite

Abstract: The demand for flexible and wearable electronic devices is increasing due to their facile interaction with human body. Flexible, stretchable and wearable sensors can be easily mounted on clothing or directly attached onto the body. Especially, highly stretchable and sensitive strain sensors are needed for the human motion detection. Here, we report highly flexible, stretchable and sensitive strain sensors based on the nanocomposite of silver nanowire (AgNW) network and PDMS elastomer in the form of the sandwich structure (i.e., AgNW thin film embedded between two layers of PDMS). The AgNW network-elastomer nanocomposite based strain sensors show strong piezoresistivity with tunable gauge factors in the ranges of 2 to 14 and a high stretchability up to 70%. We demonstrate the applicability of our high performance strain sensors by fabricating a glove integrated with five strain sensors for the motion detection of fingers and control of an avatar in the virtual environment.

Mn3O4-Graphene Hybrid as a High Capacity Anode Material for Lithium Ion Batteries

Abstract: We developed two-step solution-phase reactions to form hybrid materials of Mn3O4 nanoparticles on reduced graphene oxide (RGO) sheets for lithium ion battery applications. Mn3O4 nanoparticles grown selectively on RGO sheets over free particle growth in solution allowed for the electrically insulating Mn3O4 nanoparticles wired up to a current collector through the underlying conducting graphene network. The Mn3O4 nanoparticles formed on RGO show a high specific capacity up to ~900mAh/g near its theoretical capacity with good rate capability and cycling stability, owing to the intimate interactions between the graphene substrates and the Mn3O4 nanoparticles grown atop. The Mn3O4/RGO hybrid could be a promising candidate material for high-capacity, low-cost, and environmentally friendly anode for lithium ion batteries. Our growth-on-graphene approach should offer a new technique for design and synthesis of battery electrodes based on highly insulating materials.

Heteroatom-doped graphene materials: syntheses, properties and applications

Abstract: Heteroatom doping can endow graphene with various new or improved electromagnetic, physicochemical, optical, and structural properties. This greatly extends the arsenal of graphene materials and their potential for a spectrum of applications. Considering the latest developments, we comprehensively and critically discuss the syntheses, properties and emerging applications of the growing family of heteroatom-doped graphene materials. The advantages, disadvantages, and preferential doping features of current synthesis approaches are compared, aiming to provide clues for developing new and controllable synthetic routes. We emphasize the distinct properties resulting from various dopants, different doping levels and configurations, and synergistic effects from co-dopants, hoping to assist a better understanding of doped graphene materials. The mechanisms underlying their advantageous uses for energy storage, energy conversion, sensing, and gas storage are highlighted, aiming to stimulate more competent applications.

Broad family of carbon nanoallotropes: classification, chemistry, and applications of fullerenes, carbon dots, nanotubes, graphene, nanodiamonds, and combined superstructures.

Abstract: and Applications of Fullerenes, Carbon Dots, Nanotubes, Graphene, Nanodiamonds, and Combined Superstructures Vasilios Georgakilas,† Jason A. Perman,‡ Jiri Tucek,‡ and Radek Zboril*,‡ †Material Science Department, University of Patras, 26504 Rio Patras, Greece ‡Regional Centre of Advanced Technologies and Materials, Department of Physical Chemistry, Faculty of Science, Palacky University in Olomouc, 17 listopadu 1192/12, 771 46 Olomouc, Czech Republic

Graphene-based materials in electrochemistry

Abstract: Graphene, as the fundamental 2D carbon structure with exceptionally high crystal and electronic quality, has emerged as a rapidly rising star in the field of material science. Its sudden discovery in 2004 led to an explosion of interest in the study of graphene with respect to its unique physical, chemical, and mechanical properties, opening up a new research area for materials science and condensed-matter physics, and aiming for wide-ranging and diversified technological applications. In this critical review, we will describe recent advances in the development of graphene-based materials from the standpoint of electrochemistry. To begin with, electron transfer properties of graphene will be discussed, involving its unusual electronic structure, extraordinary electronic properties and fascinating electron transport. The next major section deals with the exciting progress related to graphene-based materials in electrochemistry since 2004, including electrochemical sensing, electrochemiluminescence, electrocatalysis, electrochemical energy conversion and FET devices. Finally, prospects and further developments in this exciting field of graphene-based materials are also suggested (224 references).