Author
Bing Ding
Other affiliations: National Institute for Materials Science, Guangxi University, Chinese Ministry of Education
Bio: Bing Ding is an academic researcher from Nanjing University of Aeronautics and Astronautics. The author has contributed to research in topics: Graphene & Supercapacitor. The author has an hindex of 42, co-authored 104 publications receiving 6633 citations. Previous affiliations of Bing Ding include National Institute for Materials Science & Guangxi University.
Topics: Graphene, Supercapacitor, Anode, Materials science, Carbon
Papers
More filters
••
TL;DR: In this paper, a review of recent developments in the biomass-derived carbon materials and the properties controlling the mechanism behind their operation are presented and discussed, including electrochemical capacitors, lithium-sulfur batteries, lithium ion batteries, and sodium-ion batteries.
Abstract: Electrochemical energy storage devices are becoming increasingly more important for reducing fossil fuel energy consumption in transportation and for the widespread deployment of intermittent renewable energy. The applications of different energy storage devices in specific situations are all primarily reliant on the electrode materials, especially carbon materials. Biomass-derived carbon materials are receiving extensive attention as electrode materials for energy storage devices because of their tunable physical/chemical properties, environmental concern, and economic value. In this review, recent developments in the biomass-derived carbon materials and the properties controlling the mechanism behind their operation are presented and discussed. Moreover, progress on the applications of biomass-derived carbon materials as electrodes for energy storage devices is summarized, including electrochemical capacitors, lithium–sulfur batteries, lithium-ion batteries, and sodium-ion batteries. The effects of the pore structure, surface properties, and graphitic degree on the electrochemical performance are discussed in detail, which will guide further rational design of the biomass-derived carbon materials for energy storage devices.
572 citations
••
TL;DR: In this paper, the authors reported the synthesis of sulfur and nitrogen dual-doping porous carbon materials, for use as the electrode materials of energy storage devices, produced by carbonizing the shells of broad beans by a chemical activation.
536 citations
••
TL;DR: Porous nitrogen-doped hollow carbon spheres (PNHCS) have been prepared by pyrolysis of hollow polyaniline spheres (HPS) which were synthesized by the use of sulfonated polystyrene spheres (SPS) as a hard template as discussed by the authors.
Abstract: Porous nitrogen-doped hollow carbon spheres (PNHCS) had been prepared by pyrolysis of hollow polyaniline spheres (HPS), which were synthesized by the use of sulfonated polystyrene spheres (SPS) as a hard template. PNHCS have a specific surface area of 213 m2 g−1 and a pore volume of 0.24 cm3 g−1. At a current density of 0.5 A g−1, the specific capacitance of the PNHCS prepared is ca. 213 F g−1. The capacity retention after 5000 charge/discharge cycles at a current density of 1 A g−1 is more than 91%. The enhanced electrochemical performance can be attributed to the unique carbon nanostructure and nitrogen-doping of the PNHCS electrodes. The hollow macro-structure plays the role of an “ion-buffering” reservoir. The micropores of the PNHCS enlarge the specific surface area, while the mesopores offer larger channels for liquid electrolyte penetration. Nitrogen groups in the PNHCS not only improve the wettability of the carbon surface, but also enhance the capacitance by addition of a pseudocapacitive redox process.
394 citations
••
TL;DR: In this paper, the authors review and comment on recent progress in metal-organic framework-based lithium-ion batteries, sodium-ion battery, lithium-air battery, and supercapacitors.
358 citations
••
TL;DR: All-carbon layer-by-layer motif architectures are synthesized by introducing 2D ordered mesoporous carbons (OMC) within the interlayer space of 2D nanomaterials by constructing ion-accessible OMC within the 2D host material.
Abstract: Although various two-dimensional (2D) nanomaterials have been explored as promising capacitive materials due to their unique layered structure, their natural restacking tendency impedes electrolyte transport and significantly restricts their practical applications. Herein, we synthesize all-carbon layer-by-layer motif architectures by introducing 2D ordered mesoporous carbons (OMC) within the interlayer space of 2D nanomaterials. As a proof of concept, MXenes are selected as 2D hosts to design 2D-2D heterostructures. Further removing the metal elements from MXenes leads to the formation of all-carbon 2D-2D heterostructures consisting of alternating layers of MXene-derived carbon (MDC) and OMC. The OMC layers intercalated with the MDC layers not only prevent restacking but also facilitate ion diffusion and electron transfer. The performance of the obtained hybrid carbons as supercapacitor electrodes demonstrates their potential for upcoming electronic devices. This method allows to overcome the restacking and blocking of 2D nanomaterials by constructing ion-accessible OMC within the 2D host material.
273 citations
Cited by
More filters
••
3,654 citations
••
TL;DR: The unique advances on ultrathin 2D nanomaterials are introduced, followed by the description of their composition and crystal structures, and the assortments of their synthetic methods are summarized.
Abstract: Since the discovery of mechanically exfoliated graphene in 2004, research on ultrathin two-dimensional (2D) nanomaterials has grown exponentially in the fields of condensed matter physics, material science, chemistry, and nanotechnology. Highlighting their compelling physical, chemical, electronic, and optical properties, as well as their various potential applications, in this Review, we summarize the state-of-art progress on the ultrathin 2D nanomaterials with a particular emphasis on their recent advances. First, we introduce the unique advances on ultrathin 2D nanomaterials, followed by the description of their composition and crystal structures. The assortments of their synthetic methods are then summarized, including insights on their advantages and limitations, alongside some recommendations on suitable characterization techniques. We also discuss in detail the utilization of these ultrathin 2D nanomaterials for wide ranges of potential applications among the electronics/optoelectronics, electrocat...
3,628 citations
01 Nov 2000
TL;DR: In this paper, the authors compared the power density characteristics of ultracapacitors and batteries with respect to the same charge/discharge efficiency, and showed that the battery can achieve energy densities of 10 Wh/kg or higher with a power density of 1.2 kW/kg.
Abstract: The science and technology of ultracapacitors are reviewed for a number of electrode materials, including carbon, mixed metal oxides, and conducting polymers. More work has been done using microporous carbons than with the other materials and most of the commercially available devices use carbon electrodes and an organic electrolytes. The energy density of these devices is 3¯5 Wh/kg with a power density of 300¯500 W/kg for high efficiency (90¯95%) charge/discharges. Projections of future developments using carbon indicate that energy densities of 10 Wh/kg or higher are likely with power densities of 1¯2 kW/kg. A key problem in the fabrication of these advanced devices is the bonding of the thin electrodes to a current collector such the contact resistance is less than 0.1 cm2. Special attention is given in the paper to comparing the power density characteristics of ultracapacitors and batteries. The comparisons should be made at the same charge/discharge efficiency.
2,437 citations
•
TL;DR: The two-step solution-phase reactions to form hybrid materials of Mn(3)O(4) nanoparticles on reduced graphene oxide (RGO) sheets for lithium ion battery applications should offer a new technique for the design and synthesis of battery electrodes based on highly insulating materials.
Abstract: We developed two-step solution-phase reactions to form hybrid materials of Mn3O4 nanoparticles on reduced graphene oxide (RGO) sheets for lithium ion battery applications. Mn3O4 nanoparticles grown selectively on RGO sheets over free particle growth in solution allowed for the electrically insulating Mn3O4 nanoparticles wired up to a current collector through the underlying conducting graphene network. The Mn3O4 nanoparticles formed on RGO show a high specific capacity up to ~900mAh/g near its theoretical capacity with good rate capability and cycling stability, owing to the intimate interactions between the graphene substrates and the Mn3O4 nanoparticles grown atop. The Mn3O4/RGO hybrid could be a promising candidate material for high-capacity, low-cost, and environmentally friendly anode for lithium ion batteries. Our growth-on-graphene approach should offer a new technique for design and synthesis of battery electrodes based on highly insulating materials.
1,587 citations
••
TL;DR: In this paper, the authors highlight the recent progress in high-sulfur-loading Li-S batteries enabled by hierarchical design principles at multiscale, particularly, basic insights into the interfacial reactions, strategies for mesoscale assembly, unique architectures, and configurational innovation in the cathode, anode, and separator.
Abstract: Owing to high specific energy, low cost, and environmental friendliness, lithium–sulfur (Li–S) batteries hold great promise to meet the increasing demand for advanced energy storage beyond portable electronics, and to mitigate environmental problems. However, the application of Li–S batteries is challenged by several obstacles, including their short life and low sulfur utilization, which become more serious when sulfur loading is increased to the practically accepted level above 3–5 mg cm−2. More and more efforts have been made recently to overcome the barriers toward commercially viable Li–S batteries with a high sulfur loading. This review highlights the recent progress in high-sulfur-loading Li–S batteries enabled by hierarchical design principles at multiscale. Particularly, basic insights into the interfacial reactions, strategies for mesoscale assembly, unique architectures, and configurational innovation in the cathode, anode, and separator are under specific concerns. Hierarchy in the multiscale design is proposed to guide the future development of high-sulfur-loading Li–S batteries.
1,364 citations