scispace - formally typeset
Search or ask a question
Author

Bing-Hao Zeng

Bio: Bing-Hao Zeng is an academic researcher from Yuan Ze University. The author has contributed to research in topics: Antenna measurement & Microstrip antenna. The author has an hindex of 12, co-authored 31 publications receiving 361 citations.

Papers
More filters
Journal ArticleDOI
TL;DR: In this article, the improved CPW-fed configurations with dual-mode double-square-ring resonators (DMDSRR) for quad-band applications were proposed, where the resonant frequency equations of DMDSRR are introduced for simply designing a quadband bandpass filter (BPF).
Abstract: We propose the improved CPW-fed configurations with dual-mode double-square-ring resonators (DMDSRR) for quad-band applications. The resonant frequency equations of DMDSRR are introduced for simply designing quad-band bandpass filter (BPF). Resonant frequencies can be controlled by tuning the perimeter ratio of the square rings. To obtain lower insertion loss, higher out-of-band rejection level and wider bandwidth of quad-band, the improved CPW-fed and dual-mode perturbations are designed. The proposed filter is successfully simulated and measured. It can be applied to 0.95, 1.26, 1.89 and 2.29 GHz systems.

85 citations

Journal ArticleDOI
TL;DR: Using configuration synthesis and design map, the CPW-fed circular fractal slot antennas are proposed for dual-band applications in this article, and the experimental results with broadband and dualband responses (47.4% and 13.5% bandwidth) and available radiation gains (peak gain 3.58 and 7.28 dBi) at 0.98 and 1.84 GHz respectively for halfwavelength design are achieved firstly.
Abstract: Using configuration synthesis and design map, the CPW-fed circular fractal slot antennas are proposed for dual-band applications. In practice, the experimental results with broadband and dual-band responses (47.4% and 13.5% bandwidth) and available radiation gains (peak gain 3.58 and 7.28 dBi) at 0.98 and 1.84 GHz respectively for half-wavelength design are achieved firstly. Then, the other broadband and dual-band responses (75.9% and 16.1% bandwidth) and available radiation gains (peak gain 3.16 and 6.62 dBi) at 2.38 and 5.35 GHz for quarter-wavelength design are described herein. Contour distribution patterns are applied to figure out the omni-directional patterns. The demonstration among the design map and the EM characteristics of the antenna is presented by current distributions.

67 citations

Journal ArticleDOI
TL;DR: In this article, a single-feed stack antenna consisting of a square loop radiator with perturbation, an aperture-coupled structure, and a straight-strip feed line for circular polarization (CP) and unidirectional radiation applications is proposed.
Abstract: The authors propose a compact single-feed stack antenna consisting of a square loop radiator with perturbation, an aperture-coupled structure, and a straight-strip feed line for circular polarization (CP) and unidirectional radiation applications. This perturbation applies both dual-mode and orthogonal-mode effects simultaneously in the square loop resonator to present bandwidth and CP characteristics. The stack antenna presents the desired axial ratio (AR) bands of 2.42 GHz with 3-dB bandwidth (BW) = 62 MHz (2.5%). The circular polarization is demonstrated with AR spectrum and orthogonal modes distributions. The proposed antenna is successfully simulated and measured with frequency responses, radiation patterns, and current distributions.

31 citations

Journal ArticleDOI
TL;DR: In this article, the authors proposed a modified antipodal Fermi antenna with piecewise-linear inner taper and outer shaped-comb corrugation and presented the longitudinal conformation for mounting application and evaluated the pulse responses with linearity test for ultra wideband (UWB) ranging and imaging applications.
Abstract: The authors propose the dual-tapered structure consisting of piecewise-linear inner taper and outer shaped-comb corrugation and the antipodal feeding section to present a modified antipodal Fermi antenna. This antenna exhibits the performance with wider band (3.6-15 GHz) in return loss responses, moderately high gain (5.1-14.5 dBi), high front-to-back ratio (24.8-38.9 dB) and available end-fire (29.8° beamwidth and -18.7 dB side lobe level) in radiation patterns. The current distributions demonstrate the characteristics of leakage, transverse waves among dual-taper and transition on balun. The proposed antenna presents the longitudinal conformation for mounting application and evaluate the pulse responses with linearity test for ultra-wideband (UWB) ranging and imaging applications.

24 citations

Journal ArticleDOI
TL;DR: In this article, the complementary split-ring resonator (CSRR) with dual C-shaped couplings was modified for high-pass filter (HPF) design and proposed improved equivalent circuits as a means to analyse the filter.
Abstract: The authors modify the complementary split-ring resonator (CSRR) with dual C-shaped couplings for high-pass filter (HPF) design and propose improved equivalent circuits as a means to analyse the filter. The π-type circuit of the dual C-shaped coupling in the CSRR-based HPF is presented to have the improved equivalent circuit in contrast to the conventional equivalent circuit. At 3 dB, the cut-off frequency fc=1.74 GHz, the maximum IL is within 0.33 dB up to 8 GHz and the 65.81 dB rejection extends down to 0.53 GHz. Simulation and measurement results including surface current distributions and frequency responses are presented and discussed.

23 citations


Cited by
More filters
Journal ArticleDOI
TL;DR: In this paper, the beam of a resonant cavity antenna is steered by transforming phase of the antenna near field using a pair of totally passive metasurfaces, which are located just above and parallel to the antenna.
Abstract: A method to steer the beam of aperture-type antennas is presented in this paper. Beam steering is achieved by transforming phase of the antenna near field using a pair of totally passive metasurfaces, which are located just above and parallel to the antenna. They are rotated independently or synchronously around the antenna axis. A prototype, with a peak gain of 19.4 dBi, demonstrated experimentally that the beam of a resonant cavity antenna can be steered to any direction within a large conical region (with an apex angle of 102°), with less than 3-dB gain variation, by simply turning the two metasurfaces without moving the antenna at all. Measured gain variation within a 92° cone is only 1.9 dBi. Contrary to conventional mechanical steering methods, such as moving reflector antennas with multiaxis rotary joints, the 3-D volume occupied by this antenna system does not change during beam steering. This advantage, together with its low profile, makes it a strong contender for space-limited applications where beam steering with active devices is not desirable due to cost, nonlinear distortion, limited power handling, sensitivity to temperature variations, radio frequency losses, or associated heating. This beam steering method using near-field phase transformation can also be applied to other aperture-type antennas and arrays with medium-to-high gains.

174 citations

Journal ArticleDOI
TL;DR: In this article, a quad-band microstrip bandpass filter (BPF) using asymmetric stepped impedance resonators (SIRs) is proposed, which only employs two sets of the asymmetric SIRs.
Abstract: A new quad-band microstrip bandpass filter (BPF) using asymmetric stepped impedance resonators (SIRs) is proposed. The filter only employs two sets of the asymmetric SIRs. One set is designed to operate at the first and third passbands (2.4/5.2 GHz) and the other set is employed at second and fourth passbands (3.5/6.8 GHz). By tuning the impedance and length ratios of the asymmetric SIRs, a multi-band filter can be easily achieved. This study provides a simple and effective method to design a quad-band filter with low insertion loss and compact size. Experimental verification is provided and good agreement has been found between simulation and measurement.

132 citations

Journal ArticleDOI
TL;DR: In this paper, a dual-band circularly-polarized (CP) CPW-fed slot antenna is proposed in which two parallel monopoles, one curved monopole and one fork-shaped monopole are used to achieve circular polarization.
Abstract: A novel dual-band circularly-polarized (CP) CPW-fed slot antenna is proposed in this communication. This antenna characterizes a small frequency ratio and wide CP bandwidths. The dual-band operations are realized by using two parallel monopoles, one curved monopole and one fork-shaped monopole. In addition, a crane-shaped strip is placed in the ground plane to achieve circular polarization. The experimental results show that the antenna has the axial ratio bandwidths of 9% for the lower band and 11% for the upper band. Both bands are left handed. The frequency ratio of the upper band to the lower band is 1.286 (1.98 GHz/1.54 GHz). Other characteristics such as impedance bandwidths, radiation patterns and gains will also be presented.

109 citations

Journal ArticleDOI
TL;DR: In this article, a phase-correcting structure (PCS) for an electromagnetic band gap (EBG) resonator antenna (ERA) was proposed to transform a non-uniform phase distribution to a nearly uniform phase distribution.
Abstract: A novel technique to design a phase-correcting structure (PCS) for an electromagnetic band gap (EBG) resonator antenna (ERA) is presented. The aperture field of a classical ERA has a significantly nonuniform phase distribution, which adversely affects its radiation characteristics. An all-dielectric PCS was designed to transform such a phase distribution to a nearly uniform phase distribution. A prototype designed using proposed technique was fabricated and tested to verify proposed methodology and to validate predicted results. A very good agreement between the predicted and the measured results is noted. Significant increase in antenna performance has been achieved due to this phase correction, including 9-dB improvement in antenna directivity (from 12.3 dBi to 21.6 dBi), lower side lobes, higher gain, and better aperture efficiency. The phase-corrected antenna has a 3-dB directivity bandwidth of 8%.

96 citations

Journal ArticleDOI
TL;DR: In this article, a dual-layer dual-band patch antenna with linear polarization was proposed for WLAN (2.40-2.4835 GHz) and WiMAX (3.40 -3.61 GHz) bands.
Abstract: A new design for single-feed dual-layer dual-band patch antenna with linear polarization is presented in this letter. The dual-band performance is achieved by E-shaped and U-slot patches. The proposed bands of the antenna are WLAN (2.40-2.4835 GHz) and WiMAX (3.40-3.61 GHz) bands. The fundamental modes of the two bands are TM01 mode, and the impedance bandwidths ( ) of 26.9% and 7.1% are achieved at central frequencies of 2.60 and 3.50 GHz. The peak gains of two different bands are 7.1 and 7.4 dBi, and good band isolation is achieved between the two bands. The advantages of the antenna are simple structure, wideband performance at low band, and high gains.

93 citations