Bo Sun

Bio: Bo Sun is an academic researcher from Beihang University. The author has contributed to research in topics: Reliability (statistics) & LED lamp. The author has an hindex of 15, co-authored 156 publications receiving 984 citations. Previous affiliations of Bo Sun include Guangdong University of Technology & Delft University of Technology.

Thermal Management on IGBT Power Electronic Devices and Modules

Abstract: As an increasing attention towards sustainable development of energy and environment, the power electronics (PEs) are gaining more and more attraction on various energy systems. The insulated gate bipolar transistor (IGBT), as one of the PEs with numerous advantages and potentials for development of higher voltage and current ratings, has been used in a board range of applications. However, the continuing miniaturization and rapid increasing power ratings of IGBTs have remarkable high heat flux, which requires complex thermal management. In this paper, studies of the thermal management on IGBTs are generally reviewed including analyzing, comparing, and classifying the results originating from these researches. The thermal models to accurately calculate the dynamic heat dissipation are divided into analytical models, numerical models, and thermal network models, respectively. The thermal resistances of current IGBT modules are also studied. According to the current products on a number of IGBTs, we observe that the junction-to-case thermal resistance generally decreases inversely in terms of the total thermal power. In addition, the cooling solutions of IGBTs are reviewed and the performance of the various solutions are studied and compared. At last, we have proposed a quick and efficient evaluation judgment for the thermal management of the IGBTs depended on the requirements on the junction-to-case thermal resistance and equivalent heat transfer coefficient of the test samples.

PoF-Simulation-Assisted Reliability Prediction for Electrolytic Capacitor in LED Drivers

Abstract: The temperature of electrolytic capacitor in light-emitting diode (LED) drivers continuously increases under operation conditions, thus the capacitors degrade faster than that with constant temperature assumption. In this paper, a physics-of-failure (PoF)-based reliability prediction methodology is developed for LED drivers to consider the temperature change of electrolytic capacitor. SPICE simulation, compact thermal modeling, and Monte Carlo simulation are integrated to predict the failure rate distribution of an electrolytic capacitor of given LED driver systems. The simulation results agree well with the accelerated test results for an RC linear AC–DC converter. Furthermore, a single inductor buck–boost DC–DC converter is simulated to understand the degradation behavior of electrolytic capacitor. It has been found that the temperature of an output stage capacitor increases significantly during operation time. The capacitor's performance without taking temperature change into account results in an overestimated driver lifetime by more than 38% for the selected case study.

A Survey of Fault Diagnosis and Fault-Tolerant Techniques—Part I: Fault Diagnosis With Model-Based and Signal-Based Approaches

Abstract: With the continuous increase in complexity and expense of industrial systems, there is less tolerance for performance degradation, productivity decrease, and safety hazards, which greatly necessitates to detect and identify any kinds of potential abnormalities and faults as early as possible and implement real-time fault-tolerant operation for minimizing performance degradation and avoiding dangerous situations. During the last four decades, fruitful results have been reported about fault diagnosis and fault-tolerant control methods and their applications in a variety of engineering systems. The three-part survey paper aims to give a comprehensive review of real-time fault diagnosis and fault-tolerant control, with particular attention on the results reported in the last decade. In this paper, fault diagnosis approaches and their applications are comprehensively reviewed from model- and signal-based perspectives, respectively.

Light-emitting diodes

Abstract: Light-Emitting Diodes. (Monographs in Electrical and Electronic Engineering.) By A. A. Bergh and P. J. Dean. Pp. viii+591. (Clarendon: Oxford; Oxford University: London, 1976.) £22.

Production and Operations Management

Abstract: Research in closed-loop supply chains (CLSCs) has grown rapidly over the last 10 years. The authors offer a critical review of influential CLSC research that takes a business economics perspective. Much of the research was inspired by practice-driven thoughtpieces, and this helped to keep research focused on relevant issues. However, CLSC research has several assumptions, such as perfect substitution between new and remanufactured products that risk becoming institutionalized. There is a strong need to carefully examine current industrial practice so that research remains focused on relevant problems. Deeper understanding of consumer perceptions of remanufactured products, product diffusion, and valuation of returned products are needed for the field to continue to add insights into developing sustainable economies.

A decade of application of the Choquet and Sugeno integrals in multi-criteria decision aid

Abstract: The main advances regarding the use of the Choquet and Sugeno integrals in multi-criteria decision aid over the last decade are reviewed. They concern mainly a bipolar extension of both the Choquet integral and the Sugeno integral, interesting particular submodels, new learning techniques, a better interpretation of the models and a better use of the Choquet integral in multi-criteria decision aid. Parallel to these theoretical works, the Choquet integral has been applied to many new fields, and several softwares and libraries dedicated to this model have been developed.