Bradley D. Rose

Bio: Bradley D. Rose is an academic researcher from University of Oregon. The author has contributed to research in topics: Fluorene & Acceptor. The author has an hindex of 15, co-authored 19 publications receiving 1402 citations. Previous affiliations of Bradley D. Rose include King Abdullah University of Science and Technology.

High operational and environmental stability of high-mobility conjugated polymer field-effect transistors through the use of molecular additives.

Abstract: Due to their low-temperature processing properties and inherent mechanical flexibility, conjugated polymer field-effect transistors (FETs) are promising candidates for enabling flexible electronic circuits and displays. Much progress has been made on materials performance; however, there remain significant concerns about operational and environmental stability, particularly in the context of applications that require a very high level of threshold voltage stability, such as active-matrix addressing of organic light-emitting diode displays. Here, we investigate the physical mechanisms behind operational and environmental degradation of high-mobility, p-type polymer FETs and demonstrate an effective route to improve device stability. We show that water incorporated in nanometre-sized voids within the polymer microstructure is the key factor in charge trapping and device degradation. By inserting molecular additives that displace water from these voids, it is possible to increase the stability as well as uniformity to a high level sufficient for demanding industrial applications.

6,12-Diarylindeno[1,2-b]fluorenes: Syntheses, Photophysics, and Ambipolar OFETs

Abstract: Herein we report the synthesis and characterization of a series of 6,12-diarylindeno[1,2-b]fluorenes (IFs). Functionalization with electron donor and acceptor groups influences the ability of the IF scaffold to undergo two-electron oxidation and reduction to yield the corresponding 18- and 22-π-electron species, respectively. A single crystal of the pentafluorophenyl-substituted IF can serve as an active layer in an organic field-effect transistor (OFET). The important finding is that the single-crystal OFET yields an ambipolar device that is able to transport holes and electrons.

Indeno[1,2-b]fluorenes: fully conjugated antiaromatic analogues of acenes.

Abstract: Acenes such as pentacene have been widely studied over the last decade because of their highly promising potential as organic semiconductors, and have found use in devices such as photovoltaics and field-effect transistors. Nonetheless, the locked s-cis diene units within acenes are an Achilles' heal, in that many acenes readily dimerize and react with oxygen. As a possible alternative, we have been examining the chemistry of indeno[1,2-b]fluorenes, a relatively unexplored class of 20 pi-electron, formally anti-aromatic compounds that contain no s-cis diene units. This presentation will report the synthesis, characterization and optoelectronic studies of the first stable, fully conjugated indenofluorene derivatives.[1]

Explorations of the Indenofluorenes and Expanded Quinoidal Analogues.

Abstract: ConspectusHighly conjugated hydrocarbons have attracted interest for use as active materials in electronic devices such as organic field effect transistors (OFET) and organic photovoltaics (OPV). In this Account, we review our progress in synthesizing and studying a new class of small molecules for potential use as organic semiconductors. The idea originated from prior research on octadehydrodibenz[12]annulene, as the system can undergo double transannular cyclization to yield the indeno[1,2-b]fluorene skeleton. Subsequent functionalization afforded the first stable, well-characterized indeno[1,2-b]fluorene derivatives, albeit in minute quantities (tens of milligrams). The preparation of these formally antiaromatic compounds has since been optimized: the new synthetic routes utilize inexpensive starting materials, involve robust and high-yielding transformations, and are amenable to considerably larger scale reaction. We have since researched the chemical space of indeno[1,2-b]fluorenes and related quinoi...

Ab initio calculation of vibrational absorption and circular dichroism spectra using density functional force fields

Abstract: : The unpolarized absorption and circular dichroism spectra of the fundamental vibrational transitions of the chiral molecule, 4-methyl-2-oxetanone, are calculated ab initio. Harmonic force fields are obtained using Density Functional Theory (DFT), MP2, and SCF methodologies and a 5S4P2D/3S2P (TZ2P) basis set. DFT calculations use the Local Spin Density Approximation (LSDA), BLYP, and Becke3LYP (B3LYP) density functionals. Mid-IR spectra predicted using LSDA, BLYP, and B3LYP force fields are of significantly different quality, the B3LYP force field yielding spectra in clearly superior, and overall excellent, agreement with experiment. The MP2 force field yields spectra in slightly worse agreement with experiment than the B3LYP force field. The SCF force field yields spectra in poor agreement with experiment.The basis set dependence of B3LYP force fields is also explored: the 6-31G* and TZ2P basis sets give very similar results while the 3-21G basis set yields spectra in substantially worse agreements with experiment. jg

Nonfullerene Acceptor Molecules for Bulk Heterojunction Organic Solar Cells

Abstract: The bulk-heterojunction blend of an electron donor and an electron acceptor material is the key component in a solution-processed organic photovoltaic device. In the past decades, a p-type conjugated polymer and an n-type fullerene derivative have been the most commonly used electron donor and electron acceptor, respectively. While most advances of the device performance come from the design of new polymer donors, fullerene derivatives have almost been exclusively used as electron acceptors in organic photovoltaics. Recently, nonfullerene acceptor materials, particularly small molecules and oligomers, have emerged as a promising alternative to replace fullerene derivatives. Compared to fullerenes, these new acceptors are generally synthesized from diversified, low-cost routes based on building block materials with extraordinary chemical, thermal, and photostability. The facile functionalization of these molecules affords excellent tunability to their optoelectronic and electrochemical properties. Within t...

Organic Optoelectronic Materials: Mechanisms and Applications

Abstract: Organic (opto)electronic materials have received considerable attention due to their applications in thin-film-transistors, light-emitting diodes, solar cells, sensors, photorefractive devices, and many others. The technological promises include low cost of these materials and the possibility of their room-temperature deposition from solution on large-area and/or flexible substrates. The article reviews the current understanding of the physical mechanisms that determine the (opto)electronic properties of high-performance organic materials. The focus of the review is on photoinduced processes and on electronic properties important for optoelectronic applications relying on charge carrier photogeneration. Additionally, it highlights the capabilities of various experimental techniques for characterization of these materials, summarizes top-of-the-line device performance, and outlines recent trends in the further development of the field. The properties of materials based both on small molecules and on conjug...

Essentials Of Computational Chemistry Theories And Models

Abstract: The fact that a new text book introducing the essentials of computational chemistry contains more than 500 pages shows impressively the grown and still growing size and importance of this field of chemistry. The author’s objectives of the book, using his own words, are “to provide a survey of computational chemistry its underpinnings, its jargon, its strengths and weaknesses that will be accessible to both the experimental and theoretical communities”. This design as a general introduction into computational chemistry makes it an alternative to Andrew R. Leach’s well-established “Molecular Modeling” (Prentice Hall) and Frank Jensen’s “Introduction to Computational Chemistry” (Wiley), although the latter focuses on the theory of electronic structure methods. Cramer’s “Essentials” covers force field and molecular orbital theory, Monte Carlo and Molecular Dynamics simulations, thermodynamic and electronic (spectroscopic) property calculation, condensed phase treatment and a few more topics. Moreover, the book contains thirteen selected case studies sexamples taken from the literature sto illustrate the application of the just presented theoretical and computational models. This especially makes the text book well suited for both classroom discussion and self-study. Each chapter of “Essentials” covers a main topic of computational chemistry and will be briefly described here; all chapters are ended by a bibliography and suggested additional readings as well as the literature references cited in the text. In chapter 1 the author defines basic terms such as “theory”, “model”, and “computation”, introduces the concept of the potential energy surface and provides some general considerations about hardware and software. Interestingly, the first equation occurring in the text is not Schro ̈dinger’s equation, as is the case for most computational chemistry introductions, but the famous Einstein relation. The second chapter deals with molecular mechanics. It explains the different potential energy contributions, introduces the field of structure optimization, and provides an overview of the variety of modern force fields. Chapter 3 covers the simulation of molecular ensembles. It defines phase space and trajectories and shows the formalism of, and problems and difference between, Monte Carlo and molecular dynamics. In chapter 4 the author introduces the foundations of molecular orbital theory. Basic concepts such as Hamilton operator, LCAO basis set approach, many-electron wave functions, etc. are explained. To illuminate the LCAO variational process, the Hu ̈ckel theory is presented with an example. Chapter 5 deals with semiempirical molecular orbital (MO) theory. Besides the classical approaches (extended Hu ̈ckel, CNDO, INDO, NDDO) and methods (e.g., MNDO, AM1, PM3) and their performance, examples are provided from the ongoing development in that still fascinating area. Ab initio MO theory is presented in chapter 6; the basis set concept is discussed in detail, and, after some considerations from an user’s point of view, the general performance of ab initio methods is explicated. The next chapter covers the problem of electron correlation and gives the most prominent solutions for its treatment: configuration interaction, theory of the multiconfiguration self-consistent field, perturbation, and coupled cluster. Practical issues are also discussed. Chapter 8’s topic is density functional theory (DFT). Its theoretical foundation, methodology, and some functionals as well as its pros and cons compared to MO theory are presented together with a general performance overview. The next two chapters deal with charge distribution, derived and spectroscopic properties (e.g., atomic charges, polarizability, rotational, vibrational, and NMR spectra), and thermodynamic properties (e.g., zero-point vibrational energy, free energy of formation, and reaction). The modeling of condensed phases is addressed in chapters 11 (implicit models) and 12 (explicit models), which closes with a comparison between the two approaches. Chapter 13 familiarizes the reader with hybrid quantum mechanical/molecular mechanical (QM/MM) models. Polarization as well as the problematic implications of unsaturated QM and MM components are discussed, and empirical valence bond methods are also presented. The treatment of excited states is the topic of chapter 14; besides CI and MCSCF as computational methods, transition probabilities and solvatochromism are discussed. The last chapter deals with reaction dynamics, mostly adiabaticskinetics, rate constants, reaction paths, and transition state theory are section topics here sbut also nonadiabatic, introducing curve crossing and Marcus theory in brief. The appendix is divided into four parts: an acronym glossary (which is very helpful), an overview of symmetry and group theory, an introduction to spin algebra, and finally a section about orbital localization. A rather detailed index ends the book. The “Essentials” writing style fits the fascinating topic: one reads on and on andssurprise! sanother chapter has been absorbed. The text is complemented by a large number of black and white figures and clear tables, mostly self-explanatory with descriptive captions. The use of equations and mathematical formulas in general is well-balanced, and the level of math should be understandable for every natural scientist with some basic knowledge of physics. There are only a few minor shortcomings: for example, a literature reference cited in the text (“Beck et al.”, p 142) is missing in the bibliography; “Kronecker” is mistyped with o ̈; and the author completely forgot to reference Leach’s text book when referring to other computational chemistry introductions. However, the author has established a specific errata web page (http://pollux.chem.umn.edu/ ∼cramer/Errors.html) with all known errors. These will be corrected in the next printing or next revised edition, respectively. With its emphasis, on one hand, on the basic concepts and applications rather than pure theory and mathematics, and on the other hand, coverage of quantum mechanical and classical mechanical models including examples from inorganic, organic, and biological chemistry, “Essentials” is a useful tool not only for teaching and learning but also as a quick reference, and thus will most probably become one of the standard text books for computational chemistry.

Achieving over 16% efficiency for single-junction organic solar cells

Abstract: To achieve high photovoltaic performance of bulk hetero-junction organic solar cells (OSCs), a range of critical factors including absorption profiles, energy level alignment, charge carrier mobility and miscibility of donor and acceptor materials should be carefully considered. For electron-donating materials, the deep highest occupied molecular orbital (HOMO) energy level that is beneficial for high open-circuit voltage is much appreciated. However, a new issue in charge transfer emerges when matching such a donor with an acceptor that has a shallower HOMO energy level. More to this point, the chemical strategies used to enhance the absorption coefficient of acceptors may lead to increased molecular crystallinity, and thus result in less controllable phase-separation of photoactive layer. Therefore, to realize balanced photovoltaic parameters, the donor-acceptor combinations should simultaneously address the absorption spectra, energy levels, and film morphologies. Here, we selected two non-fullerene acceptors, namely BTPT-4F and BTPTT-4F, to match with a wide-bandgap polymer donor P2F-EHp consisting of an imide-functionalized benzotriazole moiety, as these materials presented complementary absorption and well-matched energy levels. By delicately optimizing the blend film morphology, we demonstrated an unprecedented power conversion efficiency of over 16% for the device based on P2F-EHp:BTPTT-4F, suggesting the great promise of materials matching toward high-performance OSCs.