scispace - formally typeset
Search or ask a question
Author

Bruce Dunn

Bio: Bruce Dunn is an academic researcher from University of California, Los Angeles. The author has contributed to research in topics: Aerogel & Electrolyte. The author has an hindex of 88, co-authored 459 publications receiving 54363 citations. Previous affiliations of Bruce Dunn include California NanoSystems Institute & Broad Institute.


Papers
More filters
Proceedings ArticleDOI
02 May 2000
TL;DR: Results show that both competitive immunoassay and displacement immunoASSay are feasible using antibody-doped glasses, and these materials can detect TNT at < 1 ppm.
Abstract: Research in recent years has demonstrated that biological molecules such as enzymes, immunoglobulins, and other proteins can be immobilized in sol-gel derived matrices and retain their biological function. Development of glasses with encapsulated biomolecules has opened the possibility of solid-state optical biosensors for the detection and measurement of desired analytes. In this work, we report the successful use of sol-gel silica glasses with encapsulated antibodies for the detection of trinitrotoluene (TNT). Results show that both competitive immunoassay and displacement immunoassay are feasible using antibody-doped glasses, and these materials can detect TNT at < 1 ppm. Moreover, the sol-gel immobilized antibodies retained the ability to discriminate between TNT and an analog, trinitrobenzene. Finally, enhanced stability was observed in the sol-gel immobilized as compared to surface immobilized antibodies.
Journal ArticleDOI
TL;DR: The proteins copper-zinc superoxide dismutase (CuZnSOD), cytochrome c, myoglobin, hemoglobin, and bacterio-rhodopsin are encapsulated in stable, optically transparent porous, silica glass matrices prepared by the sol-gel method such that the biomolecules retain their characteristic reactivities and spectroscopic properties.
Abstract: The proteins copper-zinc Superoxide dismutase (CuZnSOD), cytochrome c, myoglobin, hemoglobin, and bacterio-rhodopsin are encapsulated in stable, optically transparent, porous, silica glass matrices prepared by the sol-gel method such that the biomolecules retain their characteristic reactivities and spectroscopic properties. The resulting glasses allow transport of small molecules into and out of the glasses at reasonable rates but retain the protein molecules within their pores. The transparency of the glasses enables the chemical reactions of the immobilized proteins to be monitored by means of changes in their visible absorption spectra. Silica glasses containing the immobilized proteins have similar reactivities and spectroscopic properties to those found for the proteins in solution. The enzymes glucose oxidase and peroxidase were also encapsulated in transparent silica glass matrices. Upon exposure to glucose solutions, a colored glass is formed that can be used as the active element in a solid state optically based glucose sensor. Likewise, gels containing oxalate oxidase and peroxidase exhibit spectroscopic changes upon exposure to aqueous solutions containing oxalic acid.
Patent
25 Jun 2019
TL;DR: In this paper, the template-free, water-based sol-gel methods produce slabs or coatings by gelation of a colloidal suspension of silica or other oxide nanoparticles or by ambigel formation and then ageing and drying the gels under ambient conditions.
Abstract: Materials and methods for preparing thick, mesoporous silica monolithic slabs and coatings with high transparency and low thermal conductivity are provided. The transparent silica materials are particularly suited for window or solar applications including insulation barriers for existing or new single, double pane windows or glass panel building components. The template-free, water-based sol-gel methods produce slabs or coatings by gelation of a colloidal suspension of silica or other oxide nanoparticles or by ambigel formation and then ageing and drying the gels under ambient conditions. Solvent exchanges with nonpolar, low-surface-tension solvents help to avoid cracking caused by drying stress. Mesoporous slabs can also be cast in molds on perfluorocarbon liquid substrates to reduce adhesion and enable gels to shrink freely during aging and drying without incurring significant stress that could cause fracture.

Cited by
More filters
Journal ArticleDOI
15 Nov 2001-Nature
TL;DR: A brief historical review of the development of lithium-based rechargeable batteries is presented, ongoing research strategies are highlighted, and the challenges that remain regarding the synthesis, characterization, electrochemical performance and safety of these systems are discussed.
Abstract: Technological improvements in rechargeable solid-state batteries are being driven by an ever-increasing demand for portable electronic devices. Lithium-ion batteries are the systems of choice, offering high energy density, flexible and lightweight design, and longer lifespan than comparable battery technologies. We present a brief historical review of the development of lithium-based rechargeable batteries, highlight ongoing research strategies, and discuss the challenges that remain regarding the synthesis, characterization, electrochemical performance and safety of these systems.

17,496 citations

Journal ArticleDOI
06 Feb 2008-Nature
TL;DR: Researchers must find a sustainable way of providing the power their modern lifestyles demand to ensure the continued existence of clean energy sources.
Abstract: Researchers must find a sustainable way of providing the power our modern lifestyles demand.

15,980 citations

Journal ArticleDOI
TL;DR: This work has shown that combination of pseudo-capacitive nanomaterials, including oxides, nitrides and polymers, with the latest generation of nanostructured lithium electrodes has brought the energy density of electrochemical capacitors closer to that of batteries.
Abstract: Electrochemical capacitors, also called supercapacitors, store energy using either ion adsorption (electrochemical double layer capacitors) or fast surface redox reactions (pseudo-capacitors). They can complement or replace batteries in electrical energy storage and harvesting applications, when high power delivery or uptake is needed. A notable improvement in performance has been achieved through recent advances in understanding charge storage mechanisms and the development of advanced nanostructured materials. The discovery that ion desolvation occurs in pores smaller than the solvated ions has led to higher capacitance for electrochemical double layer capacitors using carbon electrodes with subnanometre pores, and opened the door to designing high-energy density devices using a variety of electrolytes. Combination of pseudo-capacitive nanomaterials, including oxides, nitrides and polymers, with the latest generation of nanostructured lithium electrodes has brought the energy density of electrochemical capacitors closer to that of batteries. The use of carbon nanotubes has further advanced micro-electrochemical capacitors, enabling flexible and adaptable devices to be made. Mathematical modelling and simulation will be the key to success in designing tomorrow's high-energy and high-power devices.

14,213 citations

Journal ArticleDOI
18 Nov 2011-Science
TL;DR: The battery systems reviewed here include sodium-sulfur batteries that are commercially available for grid applications, redox-flow batteries that offer low cost, and lithium-ion batteries whose development for commercial electronics and electric vehicles is being applied to grid storage.
Abstract: The increasing interest in energy storage for the grid can be attributed to multiple factors, including the capital costs of managing peak demands, the investments needed for grid reliability, and the integration of renewable energy sources. Although existing energy storage is dominated by pumped hydroelectric, there is the recognition that battery systems can offer a number of high-value opportunities, provided that lower costs can be obtained. The battery systems reviewed here include sodium-sulfur batteries that are commercially available for grid applications, redox-flow batteries that offer low cost, and lithium-ion batteries whose development for commercial electronics and electric vehicles is being applied to grid storage.

11,144 citations

Journal ArticleDOI
TL;DR: This review describes some recent developments in the discovery of nanoelectrolytes and nanoeLECTrodes for lithium batteries, fuel cells and supercapacitors and the advantages and disadvantages of the nanoscale in materials design for such devices.
Abstract: New materials hold the key to fundamental advances in energy conversion and storage, both of which are vital in order to meet the challenge of global warming and the finite nature of fossil fuels. Nanomaterials in particular offer unique properties or combinations of properties as electrodes and electrolytes in a range of energy devices. This review describes some recent developments in the discovery of nanoelectrolytes and nanoelectrodes for lithium batteries, fuel cells and supercapacitors. The advantages and disadvantages of the nanoscale in materials design for such devices are highlighted.

8,157 citations