scispace - formally typeset
Search or ask a question
Author

C. G. Li

Bio: C. G. Li is an academic researcher from City University of Hong Kong. The author has contributed to research in topics: Page layout & Graph (abstract data type). The author has an hindex of 2, co-authored 2 publications receiving 103 citations.

Papers
More filters
Journal ArticleDOI
TL;DR: This research extends the previous investigation of the automation of the preliminary design stage to the layout design stage of the cooling system design process, and develops a framework for fuzzy evaluation of the layout designs to rate the various design alternatives generated.
Abstract: This research extends our previous investigation of the automation of the preliminary design stage to the layout design stage of the cooling system design process. While the functional aspects of the cooling system are considered during the preliminary design stage, the layout design stage addresses both the functionality and manufacturability of the design. A graph structure is devised to capture a given preliminary design and a graph traversal algorithm is developed to generate candidate cooling circuits from the graph structure. Heuristic search is employed to develop the cooling circuits into the layout designs by generation of tentative manufacturing plans. A framework for fuzzy evaluation of the layout designs is developed to rate the various design alternatives generated. An experimental system is implemented to verify the feasibility of the approach, and examples generated from the system are presented to illustrate the major steps of the automatic design process.

67 citations

Journal ArticleDOI
TL;DR: The cooling system of an injection mould is very important to the productivity of the injection moulding process and the quality of the moulded part and special techniques that allow C-space computation and storage in three-dimensional or lower dimension are developed.
Abstract: The cooling system of an injection mould is very important to the productivity of the injection moulding process and the quality of the moulded part. Despite the various research efforts that have been directed towards the analysis, optimization, and fabrication of cooling systems, support for the layout design of the cooling system has not been well developed. In the layout design phase, a major concern is the feasibility of building the cooling system inside the mould insert without interfering with the other mould components. This paper reports a configuration space (C-space) method to address this important issue. While a high-dimensional C-space is generally required to deal with a complex system such as a cooling system, the special characteristics of cooling system design are exploited in the present study, and special techniques that allow C-space computation and storage in three-dimensional or lower dimension are developed. This new method is an improvement on the heuristic method developed previously by the authors, because the C-space representation enables an automatic layout design system to conduct a more systematic search among all of the feasible designs. A simple genetic algorithm is implemented and integrated with the C-space representation to automatically generate candidate layout designs. Design examples generated by the genetic algorithm are given to demonstrate the feasibility of the method.

47 citations

Journal ArticleDOI
Z.-M. Li, A. Q. Gao, C. G. Li, Ma Yu, Chuan-qiang Gao 
25 Jun 2022
TL;DR: 目的: 探讨利用"两针固定法"预防合并高危因素直肠癌患者在乙状结 肠单腔造口术后造
Abstract: 目的: 探讨利用"两针固定法"预防合并高危因素直肠癌患者在乙状结肠单腔造口术后造口脱垂等并发症的临床疗效。 方法: 采用回顾性队列研究方法。收集自2015年1月至2020年6月期间,在郑州大学附属肿瘤医院连续收治的行腹会阴联合直肠癌根治(Miles)乙状结肠单腔造口手术的232例患者的临床病理资料,根据造口固定方式的不同分为两针固定组(102例)和传统固定组(130例)。两组患者基线资料差异无统计学意义(均P>0.05)。比较两组的手术时间、术后造口脱垂及其他相关并发症的发生率和转归。 结果: 两组患者均顺利完成手术,均无术中严重并发症的发生。两针固定组手术时间较传统固定组明显缩短[(1.4±0.3)d比(6.3±0.7)d,t=-65.615,P<0.001],造口脱垂[2.0%(2/102)比12.3%(16/130),χ(2)=8.550,P=0.003]、皮肤黏膜分离[3.9%(4/102)比20.0%(26/130),χ(2)=13.123,P<0.001]、造口回缩[0比14.6%(19/130),χ(2)=16.237,P<0.001]发生率明显降低,差异均有统计学意义(P<0.05)。两组术后造口旁疝及造口周围皮炎发生率的差异,均无统计学意义(均P>0.05)。 结论: 对于合并高危因素的低位直肠癌患者,两针固定法固定Miles术乙状结肠单腔造口可以有效降低术后造口脱垂等并发症的发生。.

Cited by
More filters
Journal ArticleDOI
TL;DR: A decision-making methodology based on data envelopment analysis (DEA) is presented, which uses both quantitative and qualitative criteria, for evaluating FLD, and is applied to a real data set of a case study.

250 citations

Journal ArticleDOI
TL;DR: In this paper, the performance of injection molding (IM) tools with conformal cooling channels has been evaluated using numerical modeling software originally developed for conventionally cooled mould designs, with a focus on material properties of tool steels.
Abstract: Additive manufacturing (AM) techniques such as selective laser melting (SLM) can enable the construction of injection moulding (IM) tools with conformal cooling channels that significantly improve performance through higher cooling uniformity and reduced cycle times. Design of IM cooling systems is typically achieved using commercial IM numerical modelling software originally developed for conventionally cooled mould designs. However, the accuracy of IM modelling software in predicting the performance of SLM manufactured tools with conformal cooling, across a range of moulding materials and processing conditions, has not been thoroughly evaluated in the literature. Furthermore, the SLM manufacturability and mechanical properties of tool steels typically applied in IM, such as AISI H13, are not well documented. This work addresses these deficiencies through the following: quantification of SLM H13 material properties, in particular fatigue strength which has not been previously reported; design and manufacture of a mould tool with easily exchangeable conventionally and conformally cooled inserts; and subsequent experimental validation of IM simulation software predictions under a range conditions. Result of mechanical testing showed SLM H13 parts to offer lower mechanical properties in the as-built condition compared to conventional materials; however, these increased substantially following residual stress reduction with heat treatment. Evaluation of the temperature prediction accuracy of IM numerical models showed generally high accuracy for conformally cooled SLM tools, although marginally lower when compared to conventionally cooled moulds. The outcomes of this work offer designers typical material property data for SLM manufactured H13 tooling, as well as an indication of the expected prediction accuracy of current commercial IM simulation software when applied to conformally cooled SLM tooling.

135 citations

Journal ArticleDOI
TL;DR: In this paper, a numerical model to analyze the heat transfer in heating and cooling phases of RHCM was built, and the effect of heating medium, layout and structure of the heating/cooling channels, mold structure, etc.

97 citations

Journal ArticleDOI
TL;DR: This paper reviews emerging concurrent and collaborative engineering approaches and emphasizes on the integration of different application systems across product life cycle management stages and a new paradigm of research from the angle of feature unification and association for product modeling and manufacturing is subsequently proposed.
Abstract: With widely used concurrent and collaborative engineering technologies, the validity and consistency of product information become important. In order to establish the state of the art, this paper reviews emerging concurrent and collaborative engineering approaches and emphasizes on the integration of different application systems across product life cycle management (PLM) stages. It is revealed that checking product information validity is difficult for the current computer-aided systems because engineering intent is at best partially represented in product models. It is also not easy to maintain the consistency among related product models because information associations are not established. The purpose of this review is to identify and analyze research issues with respect to information integration and sharing for future concurrent and collaborative engineering. A new paradigm of research from the angle of feature unification and association for product modeling and manufacturing is subsequently proposed.

94 citations

Journal ArticleDOI
TL;DR: In this article, the effect of the cooling system design on the solidification and heat transfer of polymer by injection molding was studied. But the authors focused on the cooling of the polymer material by cooling water flowing through horizontal six cooling channels, and the results indicated that when the cooling channels approach to the product surface, the cooling efficiency increases.

75 citations