During the past several years, there has been tremendous progress on the development of the RF system and accelerating structures for a Next Linear Collider (NLC). Developments include high-power klystrons, RF pulse compression systems and damped/detuned accelerator structures to reduce wakefields. In order to integrate these separate development efforts into an actual X-band accelerator capable of accelerating the electron beams necessary for an NLC, we are building an NLC Test Accelerator (NLCTA). The goal of the NLCTA is to bring together all elements of the entire accelerating system by constructing and reliably operating an engineered model of a high-gradient linac suitable for the NLC. The NLCTA will serve as a testbed as the design of the NLC evolves. In addition to testing the RF acceleration system, the NLCTA is designed to address many questions related to the dynamics of the beam during acceleration. In this paper, we will report on the status of the design, component development, and construction of the NLC Test Accelerator. >

/pdf/the-next-linear-collider-test-accelerator-2t3839v3zb.pdf

The Next Linear Collider Test Accelerator

Microwave pulse compression using a waveguide cavity formed by an inductive iris and an H-plane T-junction with the auxiliary arm shorted is studied. The individual components' equivalent circuits are used to develop a back of the envelope calculation scheme, which estimates the key design choices regarding the length of the waveguide main cavity, the iris width and the shorted arm length. The analysis is extended to cover the impact of the aforementioned design choices on the charging time and the time evolution of the cavity standing wave. Verification is obtained by comparing a pulse compressor at 1.3 GHz with a full-wave 3-D commercial software.

Design of Waveguide Microwave Pulse Compressors Using Equivalent Circuits

Dogan, Mustafa (Dogus Author) -- Conference full title: 5th International Particle Accelerator Conference, IPAC 2014; International Congress Center DresdenDresden; Germany; 15 June 2014 through 20 June 2014.

Conceptual design of an X-FEL facility using CLIC X-band accelerating structure

The CLIC RF frequency has been changed in 2008 from the initial 30 GHz to the European X-band 11.9942 GHz permitting beam independent power production using klystrons for CLIC accelerating structure testing. A design and fabrication contract for five klystrons at that frequency has been signed by different parties with SLAC. France (IRFU, CEA Saclay) is contributing a solid state modulator purchased in industry and specific 12 GHz RF network components to the CLIC study. RF pulses over 120 MW peak at 230 ns length will be obtained by using a novel SLED-I type pulse compression scheme designed and fabricated by IAP, Nizhny Novgorod, Russia. The X-band power test stand is being installed in the CLIC Test Facility CTF3 for independent structure and component testing in a bunker, but allowing, in a later stage, for powering RF components in the CTF3 beam lines. The design of the facility, results from commissioning of the RF power source and the expected performance of the Test Facility are reported.

/pdf/a-12-ghz-rf-power-source-for-the-clic-study-249rpfb8n2.pdf

A 12 GHz RF Power Source for the CLIC Study

An experimental station for an X-band Next Linear Collider has been constructed at SLAC. This station consists of a klystron and modulator, a low-loss waveguide system for RF power distribution, a SLED II pulse-compression and peak-power multiplication system, acceleration sections and beam-line components (gun, pre-buncher, pre-accelerator, focussing elements and spectrometer). An extensive program of experiments to evaluate the performance of all components is underway. The station is described in detail in this paper, and results to date are presented.<<ETX>>

Accelerator and RF System Development for NLC

Increasing the peak RF power available from X-band microwave tubes by means of RF pulse compression is envisioned as a way of achieving the few-hundred-megawatt power levels needed to drive a next-generation linear collider with 50-100 MW klystrons. SLED-II is a method of pulse compression similar in principal to the SLED method currently in use on the SLC and the LEP injector linac. It utilizes low-loss resonant delay lines in place of the storage cavities of the latter. This produces the added benefit of a flat-topped output pulse. At SLAC, we have designed and constructed a prototype SLED-II pulse-compression system which operates in the circular TE/sub 01/ mode. It includes a circular guide 3-dB coupler and other novel components. Low-power and initial high-power tests have been made, yielding a peak power multiplication of 4.8 at an efficiency of 40%. The system will be used in providing power for structure tests in the ASTA (Accelerator Structures Test Area) bunker. An upgraded second prototype will have improved efficiency and will serve as a model for the pulse compression system of the NLCTA (Next Linear Collider Test Accelerator). >

/pdf/high-power-rf-pulse-compression-with-sled-ii-at-slac-55yooqr12z.pdf

C. Hantista

Papers

High-power RF pulse compression with SLED-II at SLAC