scispace - formally typeset
Search or ask a question
Author

C. Martínez-Tomás

Bio: C. Martínez-Tomás is an academic researcher from University of Valencia. The author has contributed to research in topics: Metalorganic vapour phase epitaxy & Ampoule. The author has an hindex of 9, co-authored 18 publications receiving 234 citations.

Papers
More filters
Journal ArticleDOI
TL;DR: In this article, the influence of the VI/II ratio and precursor flow-rates on the morphology of ZnO nanorod arrays has been carried out, taking advantage of the ability of metal organic chemical vapor deposition (MOCVD) to individually control the precursor partial pressures Growth mechanisms are discussed to understand the evolution of the nanostructures morphology for different growth conditions.

48 citations

Journal ArticleDOI
TL;DR: In this article, the generation of defect center E4 subsequent to annealing in different ambients was monitored by conducting electron irradiations with energies, where either both the Zn- and O-sublattice are damaged or according to [1] only the zn-Lattice, a chemical assignment to the defect centers E4 and E3 could be accomplished.
Abstract: Vapor-phase grown ZnO crystals were investigated by means of DLTS measurements. The generation of defect center E4 subsequent to annealing in different ambients was monitored. By conducting electron irradiations with energies, where either both the Zn- and O-sublattice are damaged or according to [1] only the Zn-lattice, a chemical assignment to the defect centers E4 and E3 could be accomplished. DLTS investigations of ZnO samples under illumination give evidence that E4 is a negative-U center.

48 citations

Journal ArticleDOI
TL;DR: In this paper, a numerical simulation of the CdTe crystal growth process by the Bridgman method is made by using the commercial computational code FLUENT for the mathematical solution of the governing equations.

31 citations

Journal ArticleDOI
TL;DR: In this article, the photoluminescence (PL) response for different excitation intensities at energies higher than the band gap has been investigated by analyzing GaTe samples of p-type, and the results show some particular features that do not appear in other III-V and II-VI compound semiconductors.
Abstract: GaTe samples of p-type have been investigated by analyzing the photoluminescence (PL) response for different excitation intensities at energies higher than the band gap. The PL intensity variation of recombination peaks as a function of the excitation intensity has been measured and fitted by a power law. The results show some particular features that do not appear in other III-V and II-VI compound semiconductors. These features can be interpreted by means of the recombination dynamics of the carriers in the band-gap edges. The expressions for the coefficients associated with different recombination rates and the relations between them are derived and used for understanding the recombination mechanisms. The effect of an active donor level as a trap of free carriers is emphasized as a limiting element for the presence of excitons.

22 citations

Journal ArticleDOI
TL;DR: In this paper, the effects of different substrate orientations on the structural properties of CdO thin films have been analyzed by means of X-ray diffraction, including pole figures and rocking curves, and it was shown that high quality thin films, in terms of tilt and twist, can be obtained on r-, c- and m-plane sapphire, while further improvement is needed over the a-orientation.
Abstract: CdO thin films have been grown on a-plane (110), c-plane (0001), r-plane (012) and m-plane (100) sapphire substrates by metalorganic vapour-phase epitaxy (MOVPE). The effects of different substrate orientations on the structural properties of the films have been analyzed by means of X-ray diffraction, including θ-2θ scans, pole figures and rocking curves. (111), (001) and (110) orientations are found on a-, r-, and m-sapphire respectively, while films deposited on c-plane exhibit an orientation in which no low-index crystal plane is parallel to the sample surface. The recorded pole figures have allowed determining the epitaxial relationships between films and substrates, as well as the presence or absence of extended defects. The rocking curves indicate that high quality thin films, in terms of tilt and twist, can be obtained on r-, c- and m-plane sapphire, while further improvement is needed over the a-orientation. (© 2005 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim)

15 citations


Cited by
More filters
Journal ArticleDOI
TL;DR: In this article, the authors review the fundamental properties of ZnO and of ZNO-based nanostructures, doping as well as present and future applications with emphasis on the electronic and optical properties including stimulated emission.
Abstract: Several hundred thousands of tons of ZnO are used by per year, e.g. as an additive to concrete or to rubber. In the field of optoelectronics, ZnO holds promises as a material for a blue/UV optoelectronics, alternatively to GaN, as a cheap, transparent, conducting oxide, as a material for electronic circuits, which are transparent in the visible or for semiconductor spintronics. The main problem is presently, however, a high, reproducible and stable p-doping. We review in this contribution partly critically the material growth, fundamental properties of ZnO and of ZnO-based nanostructures, doping as well as present and future applications, with emphasis on the electronic and optical properties including stimulated emission. (© 2007 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim)

872 citations

Journal ArticleDOI
TL;DR: This work critically review aspects of the material growth, fundamental properties of ZnO and ZNO-based nanostructures and doping as well as present and future applications with emphasis on the electronic and optical properties including stimulated emission.
Abstract: ZnO is presently experiencing a research boom with more than 2000 ZnO-related publications in 2005. This phenomenon is triggered, for example, by hope to use ZnO as a material for blue/UV optoelectronics as an alternative to GaN, as a cheap, transparent, conducting oxide, as a material for electronic circuits that are transparent in the visible or for semiconductor spintronics. Currently, however, the main problem is to achieve high, reproducible and stable p-doping. Herein, we critically review aspects of the material growth, fundamental properties of ZnO and ZnO-based nanostructures and doping as well as present and future applications with emphasis on the electronic and optical properties including stimulated emission.

796 citations

Journal ArticleDOI
TL;DR: In this article, the effect of pH variation on the dimension and morphology of zinc oxide (ZnO) nanorods grown through hydrothermal process at temperatures less than 100 °C was studied.

213 citations

Journal ArticleDOI
TL;DR: In this article, a comprehensive review on various electrosynthesis procedures developed to obtain the nanorods of desired structure, diameter, density on the substrate is provided, and the growth mechanisms and influence of different parameters such as the type and concentration of Zn2+ and OH− precursors on the morphology of obtained ZnO films are discussed.

187 citations

Journal ArticleDOI
TL;DR: A review of the progress of different synthesis methods and applications of 1D-ZnO nanostructures can be found in this paper, where the authors provide an overview of the recent activities of the growth and applications for sensor, LED, photodetector, laser, and RS memory devices.
Abstract: One-dimensional (1D) zinc oxide (ZnO) nanostructures have been extensively and intensively studied for several decades not only for their extraordinary chemical and physical properties, but also for their current and future different electronic and optoelectronic device applications. This review provides a brief overview of the progress of different synthesis methods and applications of 1D-ZnO nanostructures. Morphology of ZnO nanostructures grown by various methods and progress in the optical properties are briefly described. Using low-temperature photoluminescence (LTPL) study, detailed informations about the defect states and impurity of such nanostructures are reported. Improvement of field emission properties by modifying the edge of 1D-ZnO nanostructures is briefly discussed. Applications such as different sensors, field effect transistor, light-emitting diodes (LEDs), and photodetector are briefly reviewed. ZnO has large exciton binding energy (60 meV) and wide band gap (3.37 eV), which could lead to lasing action based on exciton recombination. As semiconductor devices are being aggressively scaled down, ZnO 1D nanostructures based resistive switching (RS) memory (resistance random access memory) is very attractive for nonvolatile memory applications. Switching properties and mechanisms of Ga-doped and undoped ZnO nanorods/NWs are briefly discussed. The present paper reviews the recent activities of the growth and applications of various 1D-ZnO nanostructures for sensor, LED, photodetector, laser, and RS memory devices.

171 citations