Author
Calvin H. Li
Other affiliations: Tsinghua University, University of Toledo, Rensselaer Polytechnic Institute ...read more
Bio: Calvin H. Li is an academic researcher from Villanova University. The author has contributed to research in topics: Boiling & Critical heat flux. The author has an hindex of 14, co-authored 38 publications receiving 1712 citations. Previous affiliations of Calvin H. Li include Tsinghua University & University of Toledo.
Papers
More filters
••
TL;DR: In this paper, the effects of variations in the temperature and volume fraction on the steady-state effective thermal conductivity of two different nanoparticle suspensions were examined and the results indicated that the nanoparticle material, diameter, volume fraction, and bulk temperature, all have a significant impact on the effective thermalconductivity of these suspensions.
Abstract: An experimental investigation was conducted to examine the effects of variations in the temperature and volume fraction on the steady-state effective thermal conductivity of two different nanoparticle suspensions. Copper and aluminum oxide, CuO and Al2O3, nanoparticles with area weighted diameters of 29 and 36nm, respectively, were blended with distilled water at 2%, 4%, 6%, and 10% volume fractions and the resulting suspensions were evaluated at temperatures ranging from 27.5to34.7°C. The results indicate that the nanoparticle material, diameter, volume fraction, and bulk temperature, all have a significant impact on the effective thermal conductivity of these suspensions. The 6% volume fraction of CuO nanoparticle/distilled water suspension resulted in an increase in the effective thermal conductivity of 1.52 times that of pure distilled water and the 10% Al2O3 nanoparticle/distilled water suspension increased the effective thermal conductivity by a factor of 1.3, at a temperature of 34°C. A two-factor ...
749 citations
••
TL;DR: In this article, a steady-state method was used to evaluate the effective thermal conductivity of Al2O3∕distilled water nanofluids with nanoparticle diameters of 36 and 47nm.
Abstract: A steady-state method was used to evaluate the effective thermal conductivity of Al2O3∕distilled water nanofluids with nanoparticle diameters of 36 and 47nm. Tests were conducted over a temperature range of 27–37°C for volume fractions ranging from 0.5% to 6.0%. The thermal conductivity enhancement of the two nanofluids demonstrated a nonlinear relationship with respect to temperature, volume fraction, and nanoparticle size, with increases in the volume fraction, temperature, and particle size all resulting in an increase in the measured enhancement. The most significant finding was the effect that variations in particle size had on the effective thermal conductivity of the Al2O3∕distilled water nanofluids. The largest enhancement difference observed occurred at a temperature of approximately 32°C and at a volume fraction of between 2% and 4%. The experimental results exhibited a peak in the enhancement factor in this range of volume fractions for the temperature range evaluated, which implies that an opt...
247 citations
••
TL;DR: In this paper, a two-level hierarchical surface with patterned copper nanowire arrays for boiling heat transfer enhancement is developed, where microcavities are formed between short nanowires.
164 citations
••
TL;DR: In this article, the natural convection heat transfer characteristics of Al2O3/water nanofluids comprised of 47 nm, Al 2O3 and water, with volume fractions ranging from 0.5% through 6%, have been investigated.
Abstract: The natural convection heat transfer characteristics of Al2O3/water nanofluids comprised of 47 nm, Al2O3 and water, with volume fractions ranging from 0.5% through 6%, has been investigated through...
137 citations
••
TL;DR: The results indicate that the amount of heat released from ethanol combustion increases almost linearly with n-Al concentration, and the combustion model that utilized Chemical Equilibrium with Applications was shown to be in good agreement with the experimental results.
Abstract: An experimental investigation of the combustion behavior of nano-aluminum (n-Al) and nano-aluminum oxide (n-Al2O3) particles stably suspended in biofuel (ethanol) as a secondary energy carrier was conducted. The heat of combustion (HoC) was studied using a modified static bomb calorimeter system. Combustion element composition and surface morphology were evaluated using a SEM/EDS system. N-Al and n-Al2O3 particles of 50- and 36-nm diameters, respectively, were utilized in this investigation. Combustion experiments were performed with volume fractions of 1, 3, 5, 7, and 10% for n-Al, and 0.5, 1, 3, and 5% for n-Al2O3. The results indicate that the amount of heat released from ethanol combustion increases almost linearly with n-Al concentration. N-Al volume fractions of 1 and 3% did not show enhancement in the average volumetric HoC, but higher volume fractions of 5, 7, and 10% increased the volumetric HoC by 5.82, 8.65, and 15.31%, respectively. N-Al2O3 and heavily passivated n-Al additives did not participate in combustion reactively, and there was no contribution from Al2O3 to the HoC in the tests. A combustion model that utilized Chemical Equilibrium with Applications was conducted as well and was shown to be in good agreement with the experimental results.
113 citations
Cited by
More filters
••
TL;DR: A review on fluid flow and heat transfer characteristics of nanofluids in forced and free convection flows is presented in this article, where the authors identify opportunities for future research.
1,988 citations
••
TL;DR: In this paper, the authors summarized the important published articles on the enhancement of the forced convection heat transfer with nanofluids, including simulations, simulations, and experimental results.
1,738 citations
••
TL;DR: It has been found nan ofluids have a much higher and strongly temperature-dependent thermal conductivity at very low particle concentrations than conventional fluids, which can be considered as one of the key parameters for enhanced performances for many of the applications of nanofluids.
Abstract: Nanofluids are potential heat transfer fluids with enhanced thermophysical properties and heat transfer performance can be applied in many devices for better performances (i.e. energy, heat transfer and other performances). In this paper, a comprehensive literature on the applications and challenges of nanofluids have been compiled and reviewed. Latest up to date literatures on the applications and challenges in terms of PhD and Master thesis, journal articles, conference proceedings, reports and web materials have been reviewed and reported. Recent researches have indicated that substitution of conventional coolants by nanofluids appears promising. Specific application of nanofluids in engine cooling, solar water heating, cooling of electronics, cooling of transformer oil, improving diesel generator efficiency, cooling of heat exchanging devices, improving heat transfer efficiency of chillers, domestic refrigerator-freezers, cooling in machining, in nuclear reactor and defense and space have been reviewed and presented. Authors also critically analyzed some of the applications and identified research gaps for further research. Moreover, challenges and future directions of applications of nanofluids have been reviewed and presented in this paper. Based on results available in the literatures, it has been found nanofluids have a much higher and strongly temperature-dependent thermal conductivity at very low particle concentrations than conventional fluids. This can be considered as one of the key parameters for enhanced performances for many of the applications of nanofluids. Because of its superior thermal performances, latest up to date literatures on this property have been summarized and presented in this paper as well. However, few barriers and challenges that have been identified in this review must be addressed carefully before it can be fully implemented in the industrial applications.
1,558 citations
••
TL;DR: Chemistries that Facilitate Nanotechnology Kim E. Sapsford,† W. Russ Algar, Lorenzo Berti, Kelly Boeneman Gemmill,‡ Brendan J. Casey,† Eunkeu Oh, Michael H. Stewart, and Igor L. Medintz .
Abstract: Chemistries that Facilitate Nanotechnology Kim E. Sapsford,† W. Russ Algar, Lorenzo Berti, Kelly Boeneman Gemmill,‡ Brendan J. Casey,† Eunkeu Oh, Michael H. Stewart, and Igor L. Medintz*,‡ †Division of Biology, Department of Chemistry and Materials Science, Office of Science and Engineering Laboratories, U.S. Food and Drug Administration, Silver Spring, Maryland 20993, United States ‡Center for Bio/Molecular Science and Engineering Code 6900 and Division of Optical Sciences Code 5611, U.S. Naval Research Laboratory, Washington, D.C. 20375, United States College of Science, George Mason University, 4400 University Drive, Fairfax, Virginia 22030, United States Department of Biochemistry and Molecular Medicine, University of California, Davis, School of Medicine, Sacramento, California 95817, United States Sotera Defense Solutions, Crofton, Maryland 21114, United States
1,169 citations
••
TL;DR: A review of experimental/computational studies to enhance the thermal conductivity of phase change materials (PCM) that were conducted over many decades is presented in this paper, where the authors focus on studies that concern with positioning of fixed, stationary high conductivity inserts/structures.
Abstract: A review of experimental/computational studies to enhance the thermal conductivity of phase change materials (PCM) that were conducted over many decades is presented. Thermal management of electronics for aeronautics and space exploration appears to be the original intended application, with later extension to storage of thermal energy for solar thermal applications. The present review will focus on studies that concern with positioning of fixed, stationary high conductivity inserts/structures. Copper, aluminum, nickel, stainless steel and carbon fiber in various forms (fins, honeycomb, wool, brush, etc.) were generally utilized as the materials of the thermal conductivity promoters. The reviewed research studies covered a variety of PCM, operating conditions, heat exchange and thermal energy storage arrangements. The energy storage vessels included isolated thermal storage units (rectangular boxes, cylindrical and annular tubes and spheres) and containers that transferred heat to a moving fluid medium passing through it. A few studies have focused on the marked role of flow regimes that are formed due to the presence of thermally unstable fluid layers that in turn give rise to greater convective mixing and thus expedited melting of PCM. In general, it can be stated that due to utilization of fixed high conductivity inserts/structures, the conducting pathways linking the hot and cold ends must be minimized.
1,028 citations