scispace - formally typeset
Search or ask a question
Author

Cao Weiran

Other affiliations: TCL Corporation
Bio: Cao Weiran is an academic researcher from University of Florida. The author has contributed to research in topics: Quantum dot & Layer (electronics). The author has an hindex of 22, co-authored 80 publications receiving 2923 citations. Previous affiliations of Cao Weiran include TCL Corporation.

Papers published on a yearly basis

Papers
More filters
Journal ArticleDOI
TL;DR: In this paper, a red, green and blue quantum-dot LEDs are realized by customizing the nanostructure of the quantum dots. But their performance was not as good as those of traditional LEDs.
Abstract: Bright, efficient red, green and blue quantum-dot LEDs are realized by customizing the nanostructure of the quantum dots.

832 citations

Journal ArticleDOI
TL;DR: In this article, a blue-violet quantum-dot-based light-emitting diodes (QD-LEDs) with 1-octanethiol capped ligands have been shown to achieve a maximum luminance of 7600 cd/m2 and a maximum external quantum efficiency (ηEQE) of (10.3 ± 0.9)% with an electroluminescence peak at 443 nm.
Abstract: We report high-efficiency blue-violet quantum-dot-based light-emitting diodes (QD-LEDs) by using high quantum yield ZnCdS/ZnS graded core–shell QDs with proper surface ligands. Replacing the oleic acid ligands on the as-synthesized QDs with shorter 1-octanethiol ligands is found to cause a 2-fold increase in the electron mobility within the QD film. Such a ligand exchange also results in an even greater increase in hole injection into the QD layer, thus improving the overall charge balance in the LEDs and yielding a 70% increase in quantum efficiency. Using 1-octanethiol capped QDs, we have obtained a maximum luminance (L) of 7600 cd/m2 and a maximum external quantum efficiency (ηEQE) of (10.3 ± 0.9)% (with the highest at 12.2%) for QD-LEDs devices with an electroluminescence peak at 443 nm. Similar quantum efficiencies are also obtained for other blue/violet QD-LEDs with peak emission at 455 and 433 nm. To the best of our knowledge, this is the first report of blue QD-LEDs with ηEQE > 10%. Combined with ...

361 citations

Journal ArticleDOI
TL;DR: In this paper, the authors review recent progress in the field of organic photovoltaics, particularly on various innovative device architectures and optical designs to maximize the power conversion efficiency of OPV cells for a given set of photoactive donor and acceptor materials.
Abstract: Research on organic photovoltaic (OPV) materials and devices has flourished in recent years due to their potential for offering low-cost solar energy conversion. With a deepened understanding on the fundamental photovoltaic processes in organic electronic materials and the development of tailored materials and device architectures, we have seen a rapid increase in the efficiency of OPV devices to over 10%, which attracts tremendous commercial interests for further development and manufacturing. Here, we review recent progress in the field of organic photovoltaics, particularly on various innovative device architectures and optical designs to maximize the power conversion efficiency of OPV cells for a given set of photoactive donor and acceptor materials. Following an introduction of the basic device operation of organic photovoltaic cells and the advances in active materials, we firstly present different device architectures that have been used to optimize the charge generation and collection characteristics within the OPV devices. We then discuss various methods to manage and manipulate the light wave propagation in OPV devices for more complete absorption of the incident light, an important area that has been underexplored so far.

310 citations

Journal ArticleDOI
TL;DR: In this paper, the authors reviewed four different groups of materials, doped metal oxides, thin metals, conducting polymers, and nanomaterials (including carbon nanotubes, graphene, and metal nanowires), that have been reported as transparent electrodes in organic optoelectronic materials.
Abstract: Transparent conductive electrodes are one of the essential components for organic optoelectronic devices, including photovoltaic cells and light-emitting diodes. Indium-tin oxide (ITO) is the most common transparent electrode in these devices due to its excellent optical and electrical properties. However, the manufacturing of ITO film requires precious raw materials and expensive processes, which limits their compatibility with mass production of large-area, low-cost devices. The optical/electrical properties of ITO are strongly dependent on the deposition processes and treatment conditions, whereas its brittleness and the potential damage to underlying films during deposition also present challenges for its use in flexible devices. Recently, several other transparent conductive materials, which have various degrees of success relative to commercial applications have been developed to address these issues. Starting from the basic properties of ITO and the effect of various ITO surface modification methods, here we review four different groups of materials, doped metal oxides, thin metals, conducting polymers, and nanomaterials (including carbon nanotubes, graphene, and metal nanowires), that have been reported as transparent electrodes in organic optoelectronic materials. Particular emphasis is given to their optical/electrical and other material properties, deposition techniques, and applications in organic optoelectronic devices.

245 citations

Journal ArticleDOI
TL;DR: High-performance quantum dot light-emitting diodes with much extended operation lifetime using quantum dots with tailored energy band structures that are favorable for hole injections are demonstrated using an intelligent energy-level design strategy.
Abstract: For the state-of-the-art quantum dot light-emitting diodes, while the ZnO nanoparticle layers can provide effective electron injections into quantum dots layers, the hole transporting materials usually cannot guarantee sufficient hole injection owing to the deep valence band of quantum dots. Developing proper hole transporting materials to match energy levels with quantum dots remains a great challenge to further improve the device efficiency and operation lifetime. Here we demonstrate high-performance quantum dot light-emitting diodes with much extended operation lifetime using quantum dots with tailored energy band structures that are favorable for hole injections. These devices show a T95 operation lifetime of more than 2300 h with an initial brightness of 1000 cd m−2, and an equivalent T50 lifetime at 100 cd m−2 of more than 2,200,000 h, which meets the industrial requirement for display applications. The commercialization of light-emitting diodes based on emissive quantum dots (e.g. QLEDs) is hindered by their inherent poor operational lifetime. Using an intelligent energy-level design strategy, Qian et al. demonstrate QLEDs with operational lifetime that meets industrial display standards.

242 citations


Cited by
More filters
Journal ArticleDOI
01 Oct 2018-Nature
TL;DR: In this article, the authors describe visible-light-emitting perovskite LEDs that surpass the quantum efficiency milestone of 20.3 per cent, which is achieved by a new strategy for managing the compositional distribution in the device.
Abstract: Metal halide perovskite materials are an emerging class of solution-processable semiconductors with considerable potential for use in optoelectronic devices1–3. For example, light-emitting diodes (LEDs) based on these materials could see application in flat-panel displays and solid-state lighting, owing to their potential to be made at low cost via facile solution processing, and could provide tunable colours and narrow emission line widths at high photoluminescence quantum yields4–8. However, the highest reported external quantum efficiencies of green- and red-light-emitting perovskite LEDs are around 14 per cent7,9 and 12 per cent8, respectively—still well behind the performance of organic LEDs10–12 and inorganic quantum dot LEDs13. Here we describe visible-light-emitting perovskite LEDs that surpass the quantum efficiency milestone of 20 per cent. This achievement stems from a new strategy for managing the compositional distribution in the device—an approach that simultaneously provides high luminescence and balanced charge injection. Specifically, we mixed a presynthesized CsPbBr3 perovskite with a MABr additive (where MA is CH3NH3), the differing solubilities of which yield sequential crystallization into a CsPbBr3/MABr quasi-core/shell structure. The MABr shell passivates the nonradiative defects that would otherwise be present in CsPbBr3 crystals, boosting the photoluminescence quantum efficiency, while the MABr capping layer enables balanced charge injection. The resulting 20.3 per cent external quantum efficiency represents a substantial step towards the practical application of perovskite LEDs in lighting and display. A strategy for managing the compositional distribution in metal halide perovskite light-emitting diodes enables them to surpass 20% external quantum efficiency—a step towards their practical application in lighting and displays.

2,346 citations

Journal ArticleDOI
TL;DR: The demonstration of these novel quantum-dot light-emitting diodes based on all-inorganic perovskite CsPbX3 (X = Cl, Br, I) nanocrystals opens a new avenue toward designing optoelectronic devices, such as displays, photodetectors, solar cells, and lasers.
Abstract: Novel quantum-dot light-emitting diodes based on all-inorganic perovskite CsPbX3 (X = Cl, Br, I) nanocrystals are reported. The well-dispersed, single-crystal quantum dots (QDs) exhibit high quantum yields, and tunable light emission wavelength. The demonstration of these novel perovskite QDs opens a new avenue toward designing optoelectronic devices, such as displays, photodetectors, solar cells, and lasers.

2,311 citations

Journal ArticleDOI
TL;DR: A single-junction polymer solar cell with an efficiency of 10.1% is demonstrated by using deterministic aperiodic nanostructures for broadband light harvesting with optimum charge extraction through self-enhanced absorption due to collective effects, including pattern-induced anti-reflection and light scattering.
Abstract: A single-junction polymer solar cell with an efficiency of 10.1% is demonstrated by using deterministic aperiodic nanostructures for broadband light harvesting with optimum charge extraction. The performance enhancement is ascribed to the self-enhanced absorption due to collective effects, including pattern-induced anti-reflection and light scattering, as well as surface plasmonic resonance, together with a minimized recombination probability.

1,002 citations

Journal ArticleDOI
TL;DR: The article reviews the current understanding of the physical mechanisms that determine the (opto)electronic properties of high-performance organic materials and highlights the capabilities of various experimental techniques for characterization, summarizes top-of-the-line device performance, and outlines recent trends in the further development of the field.
Abstract: Organic (opto)electronic materials have received considerable attention due to their applications in thin-film-transistors, light-emitting diodes, solar cells, sensors, photorefractive devices, and many others. The technological promises include low cost of these materials and the possibility of their room-temperature deposition from solution on large-area and/or flexible substrates. The article reviews the current understanding of the physical mechanisms that determine the (opto)electronic properties of high-performance organic materials. The focus of the review is on photoinduced processes and on electronic properties important for optoelectronic applications relying on charge carrier photogeneration. Additionally, it highlights the capabilities of various experimental techniques for characterization of these materials, summarizes top-of-the-line device performance, and outlines recent trends in the further development of the field. The properties of materials based both on small molecules and on conjug...

995 citations

Journal ArticleDOI
TL;DR: Solution-processed CsPbBr3 quantum-dot light-emitting diodes with a 50-fold external quantum efficiency improvement are achieved through balancing surface passivation and carrier injection via ligand density control, which induces the coexistence of high levels of ink stability, photoluminescence quantum yields, thin-film uniformity, and carrier-injection efficiency.
Abstract: Solution-processed CsPbBr3 quantum-dot light-emitting diodes with a 50-fold external quantum efficiency improvement (up to 6.27%) are achieved through balancing surface passivation and carrier injection via ligand density control (treating with hexane/ethyl acetate mixed solvent), which induces the coexistence of high levels of ink stability, photoluminescence quantum yields, thin-film uniformity, and carrier-injection efficiency.

977 citations