Carl Gustafson

Bio: Carl Gustafson is an academic researcher from Lund University. The author has contributed to research in topics: Fading & Communication channel. The author has an hindex of 17, co-authored 34 publications receiving 1035 citations. Previous affiliations of Carl Gustafson include Saab AB & Saab Automobile AB.

High-Accuracy Localization for Assisted Living: 5G systems will turn multipath channels from foe to friend

Abstract: Asisted living (AL) technologies, enabled by technical advances such as the advent of the Internet of Things, are increasingly gaining importance in our aging society. This article discusses the potential of future high-accuracy localization systems as a key component of AL applications. Accurate location information can be tremendously useful to realize, e.g., behavioral monitoring, fall detection, and real-time assistance. Such services are expected to provide older adults and people with disabilities with more independence and thus to reduce the cost of caretaking. Total cost of ownership and ease of installation are paramount to make sensor systems for AL viable. In case of a radio-based indoor localization system, this implies that a conventional solution is unlikely to gain widespread adoption because of its requirement to install multiple fixed nodes (anchors) in each room. This article therefore places its focus on 1) discussing radiolocalization methods that reduce the required infrastructure by exploiting information from reflected multipath components (MPCs) and 2) showing that knowledge about the propagation environment enables localization with high accuracy and robustness. It is demonstrated that new millimeter-wave (mm-wave) technology, under investigation for 5G communications systems, will be able to provide centimeter (cm)-accuracy indoor localization in a robust manner, ideally suited for AL.

On mm-Wave Multipath Clustering and Channel Modeling

Abstract: Efficient and realistic mm-wave channel models are of vital importance for the development of novel mm-wave wireless technologies. Though many of the current 60 GHz channel models are based on the useful concept of multipath clusters, only a limited number of 60 GHz channel measurements have been reported in the literature for this purpose. Therefore, there is still a need for further measurement based analyses of multipath clustering in the 60 GHz band. This paper presents clustering results for a double-directional 60 GHz MIMO channel model. Based on these results, we derive a model which is validated with measured data. Statistical cluster parameters are evaluated and compared with existing channel models. It is shown that the cluster angular characteristics are closely related to the room geometry and environment, making it infeasible to model the delay and angular domains independently. We also show that when using ray tracing to model the channel, it is insufficient to only consider walls, ceiling, floor and tables; finer structures such as ceiling lamps, chairs and bookshelves need to be taken into account as well.

Characterization of 60 GHz shadowing by human bodies and simple phantoms

Abstract: The 60 GHz band is very prominsing for high data rate (>1 Gb/s) wireless systems operating at short ranges. However, due to the short wavelengths in this frequency band, the shadowing effects cuased by human bodies and furniture are severe and needs to be modeled properly. In this paper, we present an experimental, measurement-based characterization of the reflection and shadowing effects in the 60 GHz band caused by human bodies and various phantoms, in order to find simple phantoms suitable for use in human shadowing measurements. It is shown that a water-filled human phantom serves as a good choice for this purpose.

60 GHz Spatial Radio Transmission: Multiplexing or Beamforming?

Abstract: This paper compares the capacity improvement capability of spatial multiplexing and beamforming techniques for 60 GHz spatial transmissions in a multi-carrier radio system such as orthogonal frequency division multiplexing. The term beamforming in this paper refers to the conventional gain focusing, for the strongest propagation path, by narrow antenna beams. Our channel capacity metric depends only on the multipath richness of the propagation channel and the antenna aperture size, but is otherwise independent of the realization of antenna elements on the aperture. Our analysis also reveals the spatial degrees-of-freedom (SDoF) of the radio channel, which is the maximum number of antenna elements on the aperture for efficient spatial multiplexing. We evaluate the capacity and SDoF of single-polarized 60 GHz radio channels measured in an office environment. Our results show that the radio channel offers multiple SDoFs both in line-of-sight (LOS) and non-LOS (NLOS) scenarios such that spatial multiplexing can improve the channel capacity, provided that the receive signal-to-noise ratio (SNR) is sufficiently high to utilize them. Under -10 dBm of the transmit power, the high receive SNR is guaranteed when the antenna aperture size is larger than 1λ2 in LOS and 9λ2 in NLOS scenarios, respectively.

Statistical Modeling and Estimation of Censored Pathloss Data

Abstract: Pathloss is typically modeled using a log-distance power law with a large-scale fading term that is log-normal. However, the received signal is affected by the dynamic range and noise floor of the measurement system used to sound the channel, which can cause measurement samples to be truncated or censored. If the information about the censored samples is not included in the estimation method, as in ordinary least squares estimation, it can result in biased estimation of both the pathloss exponent and the large scale fading. This can be solved by applying a Tobit maximum-likelihood estimator, which provides consistent estimates for the pathloss parameters. This letter provides information about the Tobit maximum-likelihood estimator and its asymptotic variance under certain conditions.

5G : A tutorial overview of standards, trials, challenges, deployment, and practice

Abstract: There is considerable pressure to define the key requirements of 5G, develop 5G standards, and perform technology trials as quickly as possible. Normally, these activities are best done in series but there is a desire to complete these tasks in parallel so that commercial deployments of 5G can begin by 2020. 5G will not be an incremental improvement over its predecessors; it aims to be a revolutionary leap forward in terms of data rates, latency, massive connectivity, network reliability, and energy efficiency. These capabilities are targeted at realizing high-speed connectivity, the Internet of Things, augmented virtual reality, the tactile internet, and so on. The requirements of 5G are expected to be met by new spectrum in the microwave bands (3.3-4.2 GHz), and utilizing large bandwidths available in mm-wave bands, increasing spatial degrees of freedom via large antenna arrays and 3-D MIMO, network densification, and new waveforms that provide scalability and flexibility to meet the varying demands of 5G services. Unlike the one size fits all 4G core networks, the 5G core network must be flexible and adaptable and is expected to simultaneously provide optimized support for the diverse 5G use case categories. In this paper, we provide an overview of 5G research, standardization trials, and deployment challenges. Due to the enormous scope of 5G systems, it is necessary to provide some direction in a tutorial article, and in this overview, the focus is largely user centric, rather than device centric. In addition to surveying the state of play in the area, we identify leading technologies, evaluating their strengths and weaknesses, and outline the key challenges ahead, with research test beds delivering promising performance but pre-commercial trials lagging behind the desired 5G targets.

Beamforming for Millimeter Wave Communications: An Inclusive Survey

Abstract: The remarkable growth of wireless data traffic in recent times has driven the need to explore suitable regions in the radio spectrum to meet the projected requirements. In pursuance of this, millimeter wave communications have received considerable attention in the research fraternity. Due to the high path and penetration losses at millimeter wavelengths, antenna beamforming assumes a pivotal role in establishing and maintaining a robust communication link. Beamforming for millimeter wave communications poses a multitude of diverse challenges due to the large channel bandwidth, unique channel characteristics, and hardware constraints. In this paper, we track the evolution and advancements in antenna beamforming for millimeter wave communications in the context of the distinct requirements for indoor and outdoor communication scenarios. We expand the scope of discussion by including the developments in radio frequency system design and implementation for millimeter wave beamforming. We explore the suitability of millimeter wave beamforming methods, both, existing and proposed till midyear 2015, and identify the exciting new prospects unfolding in this domain.

6G Wireless Systems: Vision, Requirements, Challenges, Insights, and Opportunities

Abstract: Mobile communications have been undergoing a generational change every ten years or so. However, the time difference between the so-called “G’s” is also decreasing. While fifth-generation (5G) systems are becoming a commercial reality, there is already significant interest in systems beyond 5G, which we refer to as the sixth generation (6G) of wireless systems. In contrast to the already published papers on the topic, we take a top-down approach to 6G. More precisely, we present a holistic discussion of 6G systems beginning with lifestyle and societal changes driving the need for next-generation networks. This is followed by a discussion into the technical requirements needed to enable 6G applications, based on which we dissect key challenges and possibilities for practically realizable system solutions across all layers of the Open Systems Interconnection stack (i.e., from applications to the physical layer). Since many of the 6G applications will need access to an order-of-magnitude more spectrum, utilization of frequencies between 100 GHz and 1 THz becomes of paramount importance. As such, the 6G ecosystem will feature a diverse range of frequency bands, ranging from below 6 GHz up to 1 THz. We comprehensively characterize the limitations that must be overcome to realize working systems in these bands and provide a unique perspective on the physical and higher layer challenges relating to the design of next-generation core networks, new modulation and coding methods, novel multiple-access techniques, antenna arrays, wave propagation, radio frequency transceiver design, and real-time signal processing. We rigorously discuss the fundamental changes required in the core networks of the future, such as the redesign or significant reduction of the transport architecture that serves as a major source of latency for time-sensitive applications. This is in sharp contrast to the present hierarchical network architectures that are not suitable to realize many of the anticipated 6G services. While evaluating the strengths and weaknesses of key candidate 6G technologies, we differentiate what may be practically achievable over the next decade, relative to what is possible in theory. Keeping this in mind, we present concrete research challenges for each of the discussed system aspects, providing inspiration for what follows.

Millimeter-Wave Communications: Physical Channel Models, Design Considerations, Antenna Constructions, and Link-Budget

Abstract: The millimeter wave (mmWave) frequency band spanning from 30 to 300 GHz constitutes a substantial portion of the unused frequency spectrum, which is an important resource for future wireless communication systems in order to fulfill the escalating capacity demand. Given the improvements in integrated components and enhanced power efficiency at high frequencies, wireless systems can operate in the mmWave frequency band. In this paper, we present a survey of the mmWave propagation characteristics, channel modeling, and design guidelines, such as system and antenna design considerations for mmWave, including the link budget of the network, which are essential for mmWave communication systems. We commence by introducing the main channel propagation characteristics of mmWaves followed by channel modeling and design guidelines. Then, we report on the main measurement and modeling campaigns conducted in order to understand the mmWave band’s properties and present the associated channel models. We survey the different channel models focusing on the channel models available for the 28, 38, 60, and 73 GHz frequency bands. Finally, we present the mmWave channel model and its challenges in the context of mmWave communication systems design.