scispace - formally typeset
Search or ask a question
Author

Cédric Maury

Bio: Cédric Maury is an academic researcher from University of Southampton. The author has contributed to research in topics: Boundary layer & Noise. The author has an hindex of 14, co-authored 38 publications receiving 597 citations. Previous affiliations of Cédric Maury include University of Technology of Compiègne.

Papers
More filters
Journal ArticleDOI
TL;DR: In this paper, a self-contained analytical framework for determining the vibro-acoustic response of a plate to a large class of random excitations is presented, which provides an insight into the physical properties of the panel response and enables us to evaluate efficiently the validity of several simplifying assumptions.

118 citations

Journal ArticleDOI
TL;DR: In this article, the suitability of the Wavenumber-frequency approach in the calculation of the vibro-acoustic response of a thin baffled plate to a large class of random excitations was shown.

80 citations

Journal ArticleDOI
TL;DR: It is shown analytically and experimentally that the absorption mechanisms at the resonances are governed by a large air-frame relative velocity over the MPP surface, with either in-phase or out-of-phase relationships, depending on the MPPCP parameters.
Abstract: This paper describes theoretical and experimental investigations into the sound absorption and transmission properties of micro-perforated panels (MPP) backed by an air cavity and a thin plate. A fully coupled modal approach is proposed to calculate the absorption coefficient and the transmission loss of finite-sized micro-perforated panels-cavity-panel (MPPCP) partitions with conservative boundary conditions. It is validated against infinite partition models and experimental data. A practical methodology is proposed using collocated pressure-velocity sensors to evaluate in an anechoic environment the transmission and absorption properties of conventional MPPCPs. Results show under which conditions edge scattering effects should be accounted for at low frequencies. Coupled mode analysis is also performed and analytical approximations are derived from the resonance frequencies and mode shapes of a flexible MPPCP. It is found that the Helmholtz-type resonance frequency is deduced from the one associated to the rigidly backed MPPCP absorber shifted up by the mass-air mass resonance of the flexible non-perforated double-panel. Moreover, it is shown analytically and experimentally that the absorption mechanisms at the resonances are governed by a large air-frame relative velocity over the MPP surface, with either in-phase or out-of-phase relationships, depending on the MPPCP parameters.

72 citations

Journal ArticleDOI
TL;DR: Theoretical and experimental results are presented into the sound absorption and transmission properties of multi-layer structures made up of thin micro-perforated panels and optimal impedance relationships are proposed that ensure simultaneous maximization of both the absorption and the transmission loss under normal incidence.
Abstract: Theoretical and experimental results are presented into the sound absorption and transmission properties of multi-layer structures made up of thin micro-perforated panels (ML-MPPs). The objective is to improve both the absorption and insulation performances of ML-MPPs through impedance boundary optimization. A fully coupled modal formulation is introduced that predicts the effect of the structural resonances onto the normal incidence absorption coefficient and transmission loss of ML-MPPs. This model is assessed against standing wave tube measurements and simulations based on impedance translation method for two double-layer MPP configurations of relevance in building acoustics and aeronautics. Optimal impedance relationships are proposed that ensure simultaneous maximization of both the absorption and the transmission loss under normal incidence. Exhaustive optimization of the double-layer MPPs is performed to assess the absorption and/or transmission performances with respect to the impedance criterion. It is investigated how the panel volumetric resonances modify the excess dissipation that can be achieved from non-modal optimization of ML-MPPs.

54 citations

Journal ArticleDOI
TL;DR: It is shown analytically and experimentally that the air-frame relative velocity is a key factor that alters the input acoustic impedance of thin MPPAs.
Abstract: This paper presents theoretical and experimental results on the influence of panel vibrations on the sound absorption properties of thin micro-perforated panel absorbers (MPPA). Measurements show that the absorption performance of thin MPPAs generates extra absorption peaks or dips that cannot be understood assuming a rigid MPPA. A theoretical model is established that accounts for structural-acoustic interaction between the micro-perforated panel and the backing cavity, assuming uniform conservative boundary conditions for the panel and separable coordinates for the cavity cross-section. This model is verified experimentally against impedance tube measurements and laser vibrometric scans of the cavity-backed panel response. It is shown analytically and experimentally that the air-frame relative velocity is a key factor that alters the input acoustic impedance of thin MPPAs. Coupled mode analysis reveals that the two first resonances of an elastic MPPA are either panel-cavity, hole-cavity, or panel-controlled resonances, depending on whether the effective air mass of the perforations is greater or lower than the first panel modal mass. A critical value of the perforation ratio is found through which the MPPA resonances experience a frequency "jump" and that determines two absorption mechanisms operating out of the transitional region.

51 citations


Cited by
More filters
Journal ArticleDOI
TL;DR: In this paper, a self-contained analytical framework for determining the vibro-acoustic response of a plate to a large class of random excitations is presented, which provides an insight into the physical properties of the panel response and enables us to evaluate efficiently the validity of several simplifying assumptions.

118 citations

Journal ArticleDOI
TL;DR: The air-borne sound insulation performance of a rectangular double-panel partition clamp mounted on an infinite acoustic rigid baffle is investigated both analytically and experimentally and compared with that of a simply supported one.
Abstract: The air-borne sound insulation performance of a rectangular double-panel partition clamp mounted on an infinite acoustic rigid baffle is investigated both analytically and experimentally and compared with that of a simply supported one. With the clamped (or simply supported) boundary accounted for by using the method of modal function, a double series solution for the sound transmission loss (STL) of the structure is obtained by employing the weighted residual (Galerkin) method. Experimental measurements with Al double-panel partitions having air cavity are subsequently carried out to validate the theoretical model for both types of the boundary condition, and good overall agreement is achieved. A consistency check of the two different models (based separately on clamped modal function and simply supported modal function) is performed by extending the panel dimensions to infinite where no boundaries exist. The significant discrepancies between the two different boundary conditions are demonstrated in terms of the STL versus frequency plots as well as the panel deflection mode shapes.

112 citations

Journal ArticleDOI
TL;DR: In this article, the authors investigate the acoustic absorption capability of a multilayer micro-perforated panel absorber (MPPA) whose front layer is produced by additive manufacturing.

103 citations

Journal ArticleDOI
TL;DR: In this article, sound transmission through double shells, lined with poroelastic material in the presence of external mean flow, is studied, where the porous material is modeled as an equivalent fluid because shear wave contributions are known to be insignificant.

83 citations