This survey presents an overview of recent advances in the state of the art for computer-aided design (CAD) tools for analog and mixed-signal integrated circuits (ICs). Analog blocks typically constitute only a small fraction of the components on mixed-signal ICs and emerging systems-on-a-chip (SoC) designs. But due to the increasing levels of integration available in silicon technology and the growing requirement for digital systems to communicate with the continuous-valued external world, there is a growing need for CAD tools that increase the design productivity and improve the quality of analog integrated circuits. This paper describes the motivation and evolution of these tools and outlines progress on the various design problems involved: simulation and modeling, symbolic analysis, synthesis and optimization, layout generation, yield analysis and design centering, and test. This paper summarizes the problems for which viable solutions are emerging and those which are still unsolved.

/pdf/computer-aided-design-of-analog-and-mixed-signal-integrated-23xbvj9rc2.pdf

Computer-aided design of analog and mixed-signal integrated circuits

We describe a new method for determining component values and transistor dimensions for CMOS operational amplifiers (op-amps). We observe that a wide variety of design objectives and constraints have a special form, i.e., they are posynomial functions of the design variables. As a result, the amplifier design problem can be expressed as a special form of optimization problem called geometric programming, for which very efficient global optimization methods have been developed. As a consequence we can efficiently determine globally optimal amplifier designs or globally optimal tradeoffs among competing performance measures such as power, open-loop gain, and bandwidth. Our method, therefore, yields completely automated sizing of (globally) optimal CMOS amplifiers, directly from specifications. In this paper, we apply this method to a specific widely used operational amplifier architecture, showing in detail how to formulate the design problem as a geometric program. We compute globally optimal tradeoff curves relating performance measures such as power dissipation, unity-gain bandwidth, and open-loop gain. We show how the method can he used to size robust designs, i.e., designs guaranteed to meet the specifications for a variety of process conditions and parameters.

/pdf/optimal-design-of-a-cmos-op-amp-via-geometric-programming-4thsejbwi6.pdf

Optimal design of a CMOS op-amp via geometric programming

The paper describes the recent state of the art in hierarchical analog synthesis, with a strong emphasis on associated techniques for computer-aided model generation and optimization. Over the past decade, analog design automation has progressed to the point where there are industrially useful and commercially available tools at the cell level-tools for analog components with 10-100 devices. Automated techniques for device sizing, for layout, and for basic statistical centering have been successfully deployed. However, successful component-level tools do not scale trivially to system-level applications. While a typical analog circuit may require only 100 devices, a typical system such as a phase-locked loop, data converter, or RF front-end might assemble a few hundred such circuits, and comprise 10 000 devices or more. And unlike purely digital systems, mixed-signal designs typically need to optimize dozens of competing continuous-valued performance specifications, which depend on the circuit designer's abilities to successfully exploit a range of nonlinear behaviors across levels of abstraction from devices to circuits to systems. For purposes of synthesis or verification, these designs are not tractable when considered "flat." These designs must be approached with hierarchical tools that deal with the system's intrinsic design hierarchy. This paper surveys recent advances in analog design tools that specifically deal with the hierarchical nature of practical analog and RF systems. We begin with a detailed survey of algorithmic techniques for automatically extracting a suitable nonlinear macromodel from a device-level circuit. Such techniques are critical to both verification and synthesis activities for complex systems. We then survey recent ideas in hierarchical synthesis for analog systems and focus in particular on numerical techniques for handling the large number of degrees of freedom in these designs and for exploring the space of performance tradeoffs early in the design process. Finally, we briefly touch on recent ideas for accommodating models of statistical manufacturing variations in these tools and flows

Hierarchical Modeling, Optimization, and Synthesis for System-Level Analog and RF Designs

A methodology for the automatic synthesis of full-custom IC layout with analog constraints is presented. The methodology guarantees that all performance constraints are met when feasible, or otherwise, infeasibility is detected as soon as possible, thus providing a robust and efficient design environment. In the proposed approach, performance specifications are translated into lower-level bounds on parasitics or geometric parameters, using sensitivity analysis. Bounds can be used by a set of specialized layout tools performing stack generation, placement, routing, and compaction. For each tool, a detailed description is provided of its functionality, of the way constraints are mapped and enforced, and of its impact on the design flow. Examples drawn from industrial applications are reported to illustrate the effectiveness of the approach.

Automation of IC layout with analog constraints

We present a method for optimizing and automating component and transistor sizing for CMOS operational amplifiers. We observe that a wide variety of performance measures can be formulated as posynomial functions of the design variables. As a result, amplifier design problems can be formulated as a geometric program, a special type of convex optimization problem for which very efficient global optimization methods have recently been developed. The synthesis method is therefore fast, and determines the globally optimal design; in particular the final solution is completely independent of the starting point (which can even be infeasible), and infeasible specifications are unambiguously detected. After briefly introducing the method, which is described in more detail by M. Hershenson et al., we show how the method can be applied to six common op-amp architectures, and give several example designs.

https://web.stanford.edu/~boyd/papers/pdf/gpcad_iccad.pdf

Chang

Papers

A Top-down, Constraint-driven Design Methodology For Analog Integrated Circuits