scispace - formally typeset
Search or ask a question
Author

Chang He

Bio: Chang He is an academic researcher from Chinese Academy of Sciences. The author has contributed to research in topics: Organic solar cell & Polymer solar cell. The author has an hindex of 36, co-authored 74 publications receiving 5464 citations.


Papers
More filters
Journal ArticleDOI
TL;DR: The results demonstrate that minimizing the alkyl chains to get suitable solubility and enhanced intermolecular packing has a great potential in further improving its photovoltaic performance.
Abstract: Optimizing the molecular structures of organic photovoltaic (OPV) materials is one of the most effective methods to boost power conversion efficiencies (PCEs). For an excellent molecular system with a certain conjugated skeleton, fine tuning the alky chains is of considerable significance to fully explore its photovoltaic potential. In this work, the optimization of alkyl chains is performed on a chlorinated nonfullerene acceptor (NFA) named BTP-4Cl-BO (a Y6 derivative) and very impressive photovoltaic parameters in OPV cells are obtained. To get more ordered intermolecular packing, the n-undecyl is shortened at the edge of BTP-eC11 to n-nonyl and n-heptyl. As a result, the NFAs of BTP-eC9 and BTP-eC7 are synthesized. The BTP-eC7 shows relatively poor solubility and thus limits its application in device fabrication. Fortunately, the BTP-eC9 possesses good solubility and, at the same time, enhanced electron transport property than BTP-eC11. Significantly, due to the simultaneously enhanced short-circuit current density and fill factor, the BTP-eC9-based single-junction OPV cells record a maximum PCE of 17.8% and get a certified value of 17.3%. These results demonstrate that minimizing the alkyl chains to get suitable solubility and enhanced intermolecular packing has a great potential in further improving its photovoltaic performance.

1,218 citations

Journal ArticleDOI
TL;DR: In this paper, an active layer comprising a new widebandgap polymer donor named PBQx-TF and a new low-bandgap non-fullerene acceptor (NFA) named eC9-2Cl is rationally designed.
Abstract: Improving power conversion efficiency (PCE) is important for broadening the applications of organic photovoltaic (OPV) cells. Here, a maximum PCE of 19.0% (certified value of 18.7%) is achieved in single-junction OPV cells by combining material design with a ternary blending strategy. An active layer comprising a new wide-bandgap polymer donor named PBQx-TF and a new low-bandgap non-fullerene acceptor (NFA) named eC9-2Cl is rationally designed. With optimized light utilization, the resulting binary cell exhibits a good PCE of 17.7%. An NFA F-BTA3 is then added to the active layer as a third component to simultaneously improve the photovoltaic parameters. The improved light unitization, cascaded energy level alignment, and enhanced intermolecular packing result in open-circuit voltage of 0.879 V, short-circuit current density of 26.7 mA cm-2 , and fill factor of 0.809. This study demonstrates that further improvement of PCEs of high-performance OPV cells requires fine tuning of the electronic structures and morphologies of the active layers.

784 citations

Journal ArticleDOI
TL;DR: In this paper, a facile method for the synthesis of size and shape-controlled CuInS2 semiconductor nanocrystals was developed by thermolysis of a mixed solution of CuAc, In(Ac)3, and dodecanethiol in noncoordinating solvent 1-octadecene (ODE) at 240 °C.
Abstract: A facile method for the synthesis of size- and shape-controlled CuInS2 semiconductor nanocrystals was developed by thermolysis of a mixed solution of CuAc, In(Ac)3 (molar ratio of CuAc to In(Ac)3 = 1:1) and dodecanethiol in noncoordinating solvent 1-octadecene (ODE) at 240 °C. CuInS2 nanoparticles with size of 2 to ∼5 nm and nanorods with aspect ratio of 1 to ∼3 were obtained by adjusting the reaction parameters such as temperature and time. The as-prepared nanoparticles were characterized by X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), transmission electron microscopy, selected area electron diffraction spectroscopy, inductively coupled plasma atomic emission spectroscopy, UV−vis absorption, and photoluminescence (PL) spectroscopy. The nanoparticle solutions exhibit tunable absorption and PL spectra with the absorption edge ranging from 550 to 750 nm and PL emission peaks from 600 to 750 nm, indicating a strong size-dependent quantum confinement effect. Optical measurements of the CuI...

515 citations

Journal ArticleDOI
TL;DR: A new non-fullerene acceptor with an optical band gap (Egopt) of 1.68 eV is designed for the front subcells and the phase-separation morphology of a fullerene-free active layer is optimized to fabricate the rear subcell.
Abstract: Fabricating organic solar cells (OSCs) with a tandem structure has been considered an effective method to overcome the limited light absorption spectra of organic photovoltaic materials. Currently, the most efficient tandem OSCs are fabricated by adopting fullerene derivatives as acceptors. In this work, we designed a new non-fullerene acceptor with an optical band gap (Egopt) of 1.68 eV for the front subcells and optimized the phase-separation morphology of a fullerene-free active layer with an Egopt of 1.36 eV to fabricate the rear subcell. The two subcells show a low energy loss and high external quantum efficiency, and their photoresponse spectra are complementary. In addition, an interconnection layer (ICL) composed of ZnO and a pH-neutral self-doped conductive polymer, PCP-Na, with high light transmittance in the near-IR range was developed. From the highly optimized subcells and ICL, solution-processed fullerene-free tandem OSCs with an average power conversion efficiency (PCE) greater than 13% wer...

430 citations

Journal ArticleDOI
Runnan Yu1, Huifeng Yao1, Yong Cui1, Ling Hong1, Chang He1, Jianhui Hou1 
TL;DR: This work suggests that utilizing the complementary advantages of fullerene and NFAs is a promising way to finely tune the detailed photovoltaic parameters and further improve the PCEs of PSCs.
Abstract: Recent advances in the material design and synthesis of nonfullerene acceptors (NFAs) have revealed a new landscape for polymer solar cells (PSCs) and have boosted the power conversion efficiencies (PCEs) to over 15%. Further improvements of the photovoltaic performance are a significant challenge in NFA-PSCs based on binary donor:acceptor blends. In this study, ternary PSCs are fabricated by incorporating a fullerene derivative, PC61 BM, into a combination of a polymer donor (PBDB-TF) and a fused-ring NFA (Y6) and a very high PCE of 16.5% (certified as 16.2%) is recorded. Detailed studies suggest that the loading of PC61 BM into the PBDB-TF:Y6 blend can not only enhance the electron mobility but also can increase the electroluminescence quantum efficiency, leading to balanced charge transport and reduced nonradiative energy losses simultaneously. This work suggests that utilizing the complementary advantages of fullerene and NFAs is a promising way to finely tune the detailed photovoltaic parameters and further improve the PCEs of PSCs.

352 citations


Cited by
More filters
Journal ArticleDOI
TL;DR: Polymer-based organic photovoltaic systems hold the promise for a cost-effective, lightweight solar energy conversion platform, which could benefit from simple solution processing of the active layer.
Abstract: Fossil fuel alternatives, such as solar energy, are moving to the forefront in a variety of research fields. Polymer-based organic photovoltaic systems hold the promise for a cost-effective, lightweight solar energy conversion platform, which could benefit from simple solution processing of the active layer. The function of such excitonic solar cells is based on photoinduced electron transfer from a donor to an acceptor. Fullerenes have become the ubiquitous acceptors because of their high electron affinity and ability to transport charge effectively. The most effective solar cells have been made from bicontinuous polymer–fullerene composites, or so-called bulk heterojunctions. The best solar cells currently achieve an efficiency of about 5 %, thus significant advances in the fundamental understanding of the complex interplay between the active layer morphology and electronic properties are required if this technology is to find viable application.

3,911 citations

Journal ArticleDOI
TL;DR: Fluorene-Based Copolymers ContainingPhosphorescent Complexes and Carbazole-Based Conjugated Polymers R5.1.3.
Abstract: -phenylenevinylene)s L4. Fluorene-Based Conjugated Polymers L4.1. Fluorene-Based Copolymers ContainingElectron-Rich MoietiesM4.2. Fluorene-Based Copolymers ContainingElectron-Deficient MoietiesN4.3. Fluorene-Based Copolymers ContainingPhosphorescent ComplexesQ5. Carbazole-Based Conjugated Polymers R5.1. Poly(2,7-carbazole)-Based Polymers R5.2. Indolo[3,2-

3,686 citations

Journal ArticleDOI
TL;DR: This Account discusses the basic requirements and scientific issues in the molecular design of high efficiency photovoltaic molecules, and summarizes recent progress in electronic energy level engineering and absorption spectral broadening of the donor and acceptor photvoltaic materials by my research group and others.
Abstract: Bulk heterojunction (BHJ) polymer solar cells (PSCs) sandwich a blend layer of conjugated polymer donor and fullerene derivative acceptor between a transparent ITO positive electrode and a low work function metal negative electrode. In comparison with traditional inorganic semiconductor solar cells, PSCs offer a simpler device structure, easier fabrication, lower cost, and lighter weight, and these structures can be fabricated into flexible devices. But currently the power conversion efficiency (PCE) of the PSCs is not sufficient for future commercialization. The polymer donors and fullerene derivative acceptors are the key photovoltaic materials that will need to be optimized for high-performance PSCs.In this Account, I discuss the basic requirements and scientific issues in the molecular design of high efficiency photovoltaic molecules. I also summarize recent progress in electronic energy level engineering and absorption spectral broadening of the donor and acceptor photovoltaic materials by my researc...

2,527 citations

Journal ArticleDOI
TL;DR: School of Chemistry, Bio21 Institute, University of Melbourne, 30 Flemington Road, Victoria 3010, Australia; School of Materials Science and Engineering, Nanyang Technological University, Nastyang Avenue, Republic of Singapore 639798; Institute of Materials Research and Engineering (IMRE) and the Agency for Science, Technology and Research (A*STAR), 3 Research Link, Singapore 117602.
Abstract: A review was presented to demonstrate a historical description of the synthesis of light-emitting conjugated polymers for applications in electroluminescent devices. Electroluminescence (EL) was first reported in poly(para-phenylene vinylene) (PPV) in 1990 and researchers continued to make significant efforts to develop conjugated materials as the active units in light-emitting devices (LED) to be used in display applications. Conjugated oligomers were used as luminescent materials and as models for conjugated polymers in the review. Oligomers were used to demonstrate a structure and property relationship to determine a key polymer property or to demonstrate a technique that was to be applied to polymers. The review focused on demonstrating the way polymer structures were made and the way their properties were controlled by intelligent and rational and synthetic design.

2,378 citations

Journal ArticleDOI
14 Sep 2018-Science
TL;DR: In this article, a semi-empirical model analysis and using the tandem cell strategy to overcome the low charge mobility of organic materials, leading to a limit on the active-layer thickness and efficient light absorption was performed.
Abstract: Although organic photovoltaic (OPV) cells have many advantages, their performance still lags far behind that of other photovoltaic platforms. A fundamental reason for their low performance is the low charge mobility of organic materials, leading to a limit on the active-layer thickness and efficient light absorption. In this work, guided by a semi-empirical model analysis and using the tandem cell strategy to overcome such issues, and taking advantage of the high diversity and easily tunable band structure of organic materials, a record and certified 17.29% power conversion efficiency for a two-terminal monolithic solution-processed tandem OPV is achieved.

2,165 citations