Changjian Lin

Bio: Changjian Lin is an academic researcher from Xiamen University. The author has contributed to research in topics: Corrosion & Nanotube. The author has an hindex of 71, co-authored 298 publications receiving 16816 citations. Previous affiliations of Changjian Lin include National Institute of Standards and Technology & Guangdong University of Technology.

High-Efficiency Photoelectrocatalytic Hydrogen Generation Enabled by Palladium Quantum Dots-Sensitized TiO2 Nanotube Arrays

Abstract: TiO(2) nanotube arrays (TNTAs) sensitized by palladium quantum dots (Pd QDs) exhibit highly efficient photoelectrocatalytic hydrogen generation. Vertically oriented TNTAs were prepared by a three-step electrochemical anodization. Subsequently, Pd QDs with uniform size and narrow size distribution were formed on TiO(2) nanotubes by a modified hydrothermal reaction (i.e., yielding nanocomposites of Pd QDs deposited on TNTAs, Pd@TNTAs). By exploiting Pd@TNTA nanocomposites as both photoanode and cathode, a substantially increased photon-to-current conversion efficiency of nearly 100% at λ = 330 nm and a greatly promoted photocatalytic hydrogen production rate of 592 μmol·h(-1)·cm(-2) under 320 mW·cm(-2) irradiation were achieved. The synergy between nanotubular structures of TiO(2) and uniformly dispersed Pd QDs on TiO(2) facilitated the charge transfer of photoinduced electrons from TiO(2) nanotubes to Pd QDs and the high activity of Pd QDs catalytic center, thereby leading to high-efficiency photoelectrocatalytic hydrogen generation.

p-n Heterojunction photoelectrodes composed of Cu2O-loaded TiO2 nanotube arrays with enhanced photoelectrochemical and photoelectrocatalytic activities

Abstract: Cu2O/TiO2 p–n heterojunction photoelectrodes were prepared by depositing different amounts of p-type Cu2O nanoparticles on n-type TiO2 nanotube arrays (i.e., forming Cu2O/TiO2 composite nanotubes) via an ultrasonication-assisted sequential chemical bath deposition. The success of deposition of Cu2O nanoparticles was corroborated by structural and composition characterizations. The enhanced absorption in the visible light region was observed in Cu2O/TiO2 composite nanotubes. The largely improved separation of photogenerated electrons and holes was revealed by photocurrent measurements. Consequently, Cu2O/TiO2 heterojunction photoelectrodes exhibited a more effective photoconversion capability than TiO2 nanotubes alone in photoelectrochemical measurements. Furthermore, Cu2O/TiO2 composite photoelectrodes also possessed superior photoelectrocatalytic activity and stability in the degradation of Rhodamine B. Intriguingly, by selecting an appropriate bias potential, a synergistic effect between electricity and visible light irradiation can be achieved.

Inorganic-modified semiconductor TiO2 nanotube arrays for photocatalysis

Abstract: Semiconductor photocatalysis is a promising physicochemical process for the photodegradation of organic contaminants and bacterial detoxification. Among various oxide semiconductor photocatalysts, TiO2 has garnered considerable attention because of its outstanding properties including strong oxidizing activity, chemical and mechanical stability, corrosion resistance, and nontoxicity. This Review briefly introduces the key mechanisms of photocatalysis, highlights the recent developments pertaining to pure TiO2 nanotube arrays and TiO2 nanotube arrays modified by non-metals, metals and semiconductors, and their applications in the photocatalytic degradation of organic dyes. The improved photocatalytic efficiencies of modified TiO2 nanotube arrays are compared with unmodified counterparts. Current challenges and prospective areas of interest in this rich field are also presented.

Designing Superhydrophobic Porous Nanostructures with Tunable Water Adhesion

Abstract: National Nature Science Foundation of China [50571085, 20773100, 20620130427, 20773135]; National Basic Research Program of China 973 Program [2007CB935603]; Technology Program of Fujian and Xiamen, China [2007H0031, 3502Z20073004]; Chinese Academy of Sciences

I and i

Abstract: There is, I think, something ethereal about i —the square root of minus one. I remember first hearing about it at school. It seemed an odd beast at that time—an intruder hovering on the edge of reality. Usually familiarity dulls this sense of the bizarre, but in the case of i it was the reverse: over the years the sense of its surreal nature intensified. It seemed that it was impossible to write mathematics that described the real world in …

Dye-Sensitized Solar Cells

Abstract: Dye-sensitized solar cells (DSCs) offer the possibilities to design solar cells with a large flexibility in shape, color, and transparency. DSC research groups have been established around the worl ...

Semiconductor-based Photocatalytic Hydrogen Generation

Abstract: 2.3. Evaluation of Photocatalytic Water Splitting 6507 2.3.1. Photocatalytic Activity 6507 2.3.2. Photocatalytic Stability 6507 3. UV-Active Photocatalysts for Water Splitting 6507 3.1. d0 Metal Oxide Photocatalyts 6507 3.1.1. Ti-, Zr-Based Oxides 6507 3.1.2. Nb-, Ta-Based Oxides 6514 3.1.3. W-, Mo-Based Oxides 6517 3.1.4. Other d0 Metal Oxides 6518 3.2. d10 Metal Oxide Photocatalyts 6518 3.3. f0 Metal Oxide Photocatalysts 6518 3.4. Nonoxide Photocatalysts 6518 4. Approaches to Modifying the Electronic Band Structure for Visible-Light Harvesting 6519

Gold nanoparticles in chemical and biological sensing.

Abstract: Detection of chemical and biological agents plays a fundamental role in biomedical, forensic and environmental sciences1–4 as well as in anti bioterrorism applications.5–7 The development of highly sensitive, cost effective, miniature sensors is therefore in high demand which requires advanced technology coupled with fundamental knowledge in chemistry, biology and material sciences.8–13 In general, sensors feature two functional components: a recognition element to provide selective/specific binding with the target analytes and a transducer component for signaling the binding event. An efficient sensor relies heavily on these two essential components for the recognition process in terms of response time, signal to noise (S/N) ratio, selectivity and limits of detection (LOD).14,15 Therefore, designing sensors with higher efficacy depends on the development of novel materials to improve both the recognition and transduction processes. Nanomaterials feature unique physicochemical properties that can be of great utility in creating new recognition and transduction processes for chemical and biological sensors15–27 as well as improving the S/N ratio by miniaturization of the sensor elements.28 Gold nanoparticles (AuNPs) possess distinct physical and chemical attributes that make them excellent scaffolds for the fabrication of novel chemical and biological sensors (Figure 1).29–36 First, AuNPs can be synthesized in a straightforward manner and can be made highly stable. Second, they possess unique optoelectronic properties. Third, they provide high surface-to-volume ratio with excellent biocompatibility using appropriate ligands.30 Fourth, these properties of AuNPs can be readily tuned varying their size, shape and the surrounding chemical environment. For example, the binding event between recognition element and the analyte can alter physicochemical properties of transducer AuNPs, such as plasmon resonance absorption, conductivity, redox behavior, etc. that in turn can generate a detectable response signal. Finally, AuNPs offer a suitable platform for multi-functionalization with a wide range of organic or biological ligands for the selective binding and detection of small molecules and biological targets.30–32,36 Each of these attributes of AuNPs has allowed researchers to develop novel sensing strategies with improved sensitivity, stability and selectivity. In the last decade of research, the advent of AuNP as a sensory element provided us a broad spectrum of innovative approaches for the detection of metal ions, small molecules, proteins, nucleic acids, malignant cells, etc. in a rapid and efficient manner.37 Figure 1 Physical properties of AuNPs and schematic illustration of an AuNP-based detection system. In this current review, we have highlighted the several synthetic routes and properties of AuNPs that make them excellent probes for different sensing strategies. Furthermore, we will discuss various sensing strategies and major advances in the last two decades of research utilizing AuNPs in the detection of variety of target analytes including metal ions, organic molecules, proteins, nucleic acids, and microorganisms.