Cheng-Fu Yang

Bio: Cheng-Fu Yang is an academic researcher from National University of Kaohsiung. The author has contributed to research in topics: Thin film & Dielectric. The author has an hindex of 21, co-authored 226 publications receiving 3551 citations. Previous affiliations of Cheng-Fu Yang include United States Air Force Academy & National Sun Yat-sen University.

Prepare dispersed CIS nano-scale particles and spray coating CIS absorber layers using nano-scale precursors

Abstract: In this study, the Mo-electrode thin films were deposited by a two-stepped process, and the high-purity copper indium selenide-based powder (CuInSe2, CIS) was fabricated by hydrothermal process by Nanowin Technology Co. Ltd. From the X-ray pattern of the CIS precursor, the mainly crystalline phase was CIS, and the almost undetectable CuSe phase was observed. Because the CIS powder was aggregated into micro-scale particles and the average particle sizes were approximately 3 to 8 μm, the CIS power was ground into nano-scale particles, then the 6 wt.% CIS particles were dispersed into isopropyl alcohol to get the solution for spray coating method. Then, 0.1 ml CIS solution was sprayed on the 20 mm × 10 mm Mo/glass substrates, and the heat treatment for the nano-scale CIS solution under various parameters was carried out in a selenization furnace. The annealing temperature was set at 550°C, and the annealing time was changed from 5 to 30 min, without extra Se content was added in the furnace. The influences of annealing time on the densification, crystallization, resistivity (ρ), hall mobility (μ), and carrier concentration of the CIS absorber layers were well investigated in this study.

Improvements in the sintering and microwave properties of BiNbO4 microwave ceramics by V2O5 addition

Abstract: The effects of V2O5 on the phase formation and the microwave dielectric properties of BiNbO4 ceramics were investigated as a function of the amount of V2O5. As the amount of V2O5 addition increased from 0.125 to 1 wt%, the densification temperatures of BiNbO4 ceramics decreased from 960 to 900°C. For densified BiNbO4 ceramics, as the amount of V2O5 increased from 0.125 to 1 wt% V2O5 added, the dielectric constants decreased from 43.7 to 43.4 and the temperature coefficients (τf) increased from +2.8 to +19.5 ppm/°C. The quality values (Q) of V2O5-doped BiNbO4 ceramics first increased, reached a maximum at 0.5 wt% V2O5, and then decreased with the further increase amount of V2O5 addition. The 0.5 wt%-V2O5-doped BiNbO4 ceramics sintered at 960°C had the optimum microwave dielectric properties: er=43.6, τf=+13.8 ppm/°C, and Q=3410.

Develop Quad-Band (1.57/2.45/3.5/5.2 GHz) Bandpass Filters on the Ceramic Substrate

Abstract: By the use of screen-printing technique, four kinds of basic structures (outer-frame, U-shaped resonator, modified end-coupled microstrip line, and defected ground structures) are combined to develop a miniature quad-band bandpass filter on a MgTa1.5Nb0.5O6 microwave ceramic substrate. The operating frequencies are designed for the applications of the modern GPS (1.57 GHz), WiMAX (3.5 GHz) and WLAN (2.45/5.2 GHz) systems, and the design procedures are discussed in detail and both of the simulated and measured results are presented.

Band-notched ultra-wideband circular slot antenna with inverted c-shaped parasitic strip

Abstract: A novel ultra-wideband (UWB) circular slot antenna with a parasitic strip for immunity at 5.2/5.8 GHz is proposed. The antenna has an indented circular stub and an inverted C-shaped parasitic strip embedded inside the circular slot. The desired band-notched UWB operation can be obtained by choosing the size of the inverted C-shaped parasitic strip. The proposed antenna has advantages of low cost, compact size and easy design. Details of the proposed design and experimental results of the constructed antennas are presented.

Numerical analysis of an ultra-wideband metamaterial absorber with high absorptivity from visible light to near-infrared

Abstract: In this study, we designed a novel ultra-wideband (UWB) absorber and numerically analyzed it to demonstrate that its light absorptivity was greater than 90% in the wavelength range of visible light and near-infrared (405-1505 nm). The structure of proposed novel UWB absorber consisted of four layers of films, including silica, titanium, magnesium fluoride, and aluminium, and the upper silica and titanium layers had rectangular cubes in them. For that, the excitations of propagating surface plasmon resonance (PSPR), local surface plasmon resonance (LSPR), and the resonance of Fabry-Perot (FP) cavity were generated at the same time and combined to reach the effect of perfect absorption and ultra-wideband. The proposed absorber had an average absorptivity of 95.14% in the wavelength range of 405 ∼ 1505 nm when the light was under normal incidence. In addition, the UWB absorber was large incident angle insensitive and polarization-independent. The absorber proposed in the paper had great prospects in the fields of thermal electronic equipment, solar power generation, and perfect cloaking.

Handbook of Chemistry and Physics

Abstract: There is a special reason for reviewing this book at this time: it is the 50th edition of a compendium that is known and used frequently in most chemical and physical laboratories in many parts of the world. Surely, a publication that has been published for 56 years, withstanding the vagaries of science in this century, must have had something to offer. There is another reason: while the book is a standard fixture in most chemical and physical laboratories, including those in medical centers, it is not as frequently seen in the laboratories of physician's offices (those either in solo or group practice). I believe that the Handbook can be useful in those laboratories. One of the reasons, among others, is that the various basic items of information it offers may be helpful in new tests, either physical or chemical, which are continuously being published. The basic information may relate

Nanostructured plasmonic sensors.

Abstract: Surface plasmons (SPs) are coherent oscillations of conduction electrons on a metal surface excited by electromagnetic radiation at a metal -dielectric interface. The growing field of research on such light -metal interactions is known as ‘plasmonics’. 1-3 This branch of research has attracted much attention due to its potential applications in miniaturized optical devices, sensors, and photonic circuits as well as in medical diagnostics and therapeutics. 4-8

Efficient and stable large-area perovskite solar cells with inorganic charge extraction layers

Abstract: The recent dramatic rise in power conversion efficiencies (PCEs) of perovskite solar cells (PSCs) has triggered intense research worldwide. However, high PCE values have often been reached with poor stability at an illuminated area of typically less than 0.1 square centimeter. We used heavily doped inorganic charge extraction layers in planar PSCs to achieve very rapid carrier extraction, even with 10- to 20-nanometer-thick layers, avoiding pinholes and eliminating local structural defects over large areas. The robust inorganic nature of the layers allowed for the fabrication of PSCs with an aperture area >1 square centimeter that have a PCE >15%, as certified by an accredited photovoltaic calibration laboratory. Hysteresis in the current-voltage characteristics was eliminated; the PSCs were stable, with >90% of the initial PCE remaining after 1000 hours of light soaking.

Compact and Broadband Microstrip Antennas

Abstract: Preface. 1. Introduction and Overview. 1.1 Introduction. 1.2 Compact Microstrip Antennas. 1.3 Compact Broadband Microstrip Antennas. 1.4 Compact Dual-Frequency Microstrip Antennas. 1.5 Compact Dual-Polarized Microstrip Antennas. 1.6 Compact Circularly Polarized Microstrip Antennas. 1.7 Compact Microstrip Antennas with Enhanced Gain. 1.8 Broadband Microstrip Antennas. 1.9 Broadband Dual-Frequency and Dual-Polarized Microstrip Antennas. 1.10 Broadband and Dual-Band Circularly Polarized Microstrip Antennas. 2. Compact Microstrip Antennas. 2.1 Introduction. 2.2 Use of a Shorted Patch with a Thin Dielectric Substrate. 2.3 Use of a Meandered Patch. 2.4 Use of a Meandered Ground Plane. 2.5 Use of a Planar Inverted-L Patch. 2.6 Use of an Inverted U-Shaped or Folded Patch. 3. Compact Broadband Microstrip Antennas. 3.1 Introduction. 3.2 Use of a Shorted Patch with a Thick Air Substrate. 3.3 Use of Stacked Shorted Patches. 3.4 Use of Chip-Resistor and Chip-Capacitor Loading Technique. 3.5 Use of a Slot-Loading Technique. 3.6 Use of a Slotted Ground Plane. 4. Compact Dual-Frequency and Dual-Polarized Microstrip Antennas. 4.1 Introduction. 4.2 Some Recent Advances in Regular-Size Dual-Frequency Designs. 4.3 Compact Dual-Frequency Operation with Same Polarization Planes. 4.4 Compact Dual-Frequency Operation. 4.5 Dual-Band or Triple-Band PIFA. 4.6 Compact Dual-Polarized Designs. 5. Compact Circularly Polarized Microstrip Antennas. 5.1 Introduction. 5.2 Designs with a Cross-Slot of Unequal Arm Lengths. 5.3 Designs with a Y-Shaped Slot of Unequal Arm Lengths. 5.4 Designs with Slits. 5.5 Designs with Spur Lines. 5.6 Designs with Truncated Corners. 5.7 Designs with Peripheral Cuts. 5.8 Designs with a Tuning Stub. 5.9 Designs with a Bent Tuning Stub. 5.10 Compact CP Designs with an Inset Microstrip-Line Feed. 6. Compact Microstrip Antennas with Enhanced Gain. 6.1 Introduction. 6.2 Compact Microstrip Antennas with High-Permittivity Superstrate. 6.3 Compact Microstrip Antennas with Active Circuitry. 7. Broadband Microstrip Antennas. 7.1 Introduction. 7.2 Use of Additional Microstrip Resonators. 7.3 Microstrip Antennas with an Air Substrate. 7.4 Broadband Slot-Loaded Microstrip Antennas. 7.5 Broadband Microstrip Antennas with an Integrated Reactive Loading. 7.6 Broadband Microstrip Antennas with Reduced Cross-Polarization Radiation. 8. Broadband Dual-Frequency and Dual-Polarized Microstrip Antennas. 8.1 Introduction. 8.2 Broadband Dual-Frequency Microstrip Antennas. 8.3 Broadband Dual-Polarized Microstrip Antennas. 9. Broadband and Dual-Band Circularly Polarized Microstrip Antennas. 9.1 Introduction. 9.2 Broadband Single-Feed Circularly Polarized Microstrip Antennas. 9.3 Broadband Two-Feed Circularly Polarized Microstrip Antennas. 9.4 Broadband Four-Feed Circularly Polarized Microstrip Antennas. 9.5 Dual-Band Circularly Polarized Microstrip Antennas. Index.