Chenming Hu

Bio: Chenming Hu is an academic researcher from University of California, Berkeley. The author has contributed to research in topics: MOSFET & Gate oxide. The author has an hindex of 119, co-authored 1296 publications receiving 57264 citations. Previous affiliations of Chenming Hu include Motorola & National Chiao Tung University.

BSIM Compact Model of Quantum Confinement in Advanced Nanosheet FETs

Abstract: We propose a compact model for nanosheet FETs that take the effects of quantum confinement into account. The model captures the nanosheet width and thickness dependence of the electrostatic dimension, density of states, effective mass, subband energies, and threshold voltages and includes them in the charge calculation, resulting in an accurate terminal charge and current characteristics. The model has been implemented using Verilog-A in the BSIM-CMG framework for all simulations. It has been validated with band-structure calculation-based TCAD simulations as well as measured data. We have also highlighted the significance of quantum mechanical effects on analog and RF performance of the device.

RLC signal integrity analysis of high-speed global interconnects [CMOS]

Abstract: Inductive and capacitive coupling effects for high-speed global interconnects are studied via simulation. The impact of inductive coupling on delay and noise is found to be comparable to capacitive effects in high-speed buses. The results indicate that current-return paths are not strictly bounded by wide VDD/GND lines, so that inductive coupling is only partially eliminated by using shield wires. Shielding strategies for noise- and delay-sensitive nets is proposed, considering worst-case switching patterns.

Strained silicon structure

Abstract: A semiconductor device includes a substrate, a first epitaxial layer, a second epitaxial layer, a third epitaxial layer, a first trench, and a second trench. The first epitaxial layer is formed on the substrate. The first layer has lattice mismatch relative to the substrate. The second epitaxial layer is formed on the first layer, and the second layer has lattice mismatch relative to the first layer. The third epitaxial layer is formed on the second layer, and the third layer has lattice mismatch relative to the second layer. Hence, the third layer may be strained silicon. The first trench extends through the first layer. The second trench extends through the third layer and at least partially through the second layer. At least part of the second trench is aligned with at least part of the first trench, and the second trench is at least partially filled with an insulating material.

Compact Modeling of Variation in FinFET SRAM Cells

Abstract: FinFET technology is a possible solution to achieve a better power/performance trade-off for SRAM cells. This article provides a comprehensive analysis of the variations in FinFET devices, their impact on SRAM stability, and a statistical design procedure for FinFET SRAM cells.

Semiconductor device with high-k gate dielectric

Abstract: An integrated circuit includes a substrate, a first transistor, and a second transistor. The first transistor has a first gate dielectric portion located between a first gate electrode and the substrate. The first gate dielectric portion includes a first high-permittivity dielectric material and/or a second high-permittivity dielectric material. The first gate dielectric portion has a first equivalent silicon oxide thickness. The second transistor has a second gate dielectric portion located between a second gate electrode and the substrate. The second gate dielectric portion includes the first high-permittivity dielectric material and/or the second high-permittivity dielectric material. The second gate dielectric portion has a second equivalent silicon oxide thickness. The second equivalent silicon oxide thickness may be different than the first equivalent silicon oxide thickness.

I and i

Abstract: There is, I think, something ethereal about i —the square root of minus one. I remember first hearing about it at school. It seemed an odd beast at that time—an intruder hovering on the edge of reality. Usually familiarity dulls this sense of the bizarre, but in the case of i it was the reverse: over the years the sense of its surreal nature intensified. It seemed that it was impossible to write mathematics that described the real world in …

疟原虫var基因转换速率变化导致抗原变异[英]／Paul H, Robert P, Christodoulou Z, et al//Proc Natl Acad Sci U S A

Abstract: 抗原变异可使得多种致病微生物易于逃避宿主免疫应答。表达在感染红细胞表面的恶性疟原虫红细胞表面蛋白1（PfPMP1）与感染红细胞、内皮细胞、树突状细胞以及胎盘的单个或多个受体作用，在黏附及免疫逃避中起关键的作用。每个单倍体基因组var基因家族编码约60种成员，通过启动转录不同的var基因变异体为抗原变异提供了分子基础。

High-κ gate dielectrics: Current status and materials properties considerations

Abstract: Many materials systems are currently under consideration as potential replacements for SiO2 as the gate dielectric material for sub-0.1 μm complementary metal–oxide–semiconductor (CMOS) technology. A systematic consideration of the required properties of gate dielectrics indicates that the key guidelines for selecting an alternative gate dielectric are (a) permittivity, band gap, and band alignment to silicon, (b) thermodynamic stability, (c) film morphology, (d) interface quality, (e) compatibility with the current or expected materials to be used in processing for CMOS devices, (f) process compatibility, and (g) reliability. Many dielectrics appear favorable in some of these areas, but very few materials are promising with respect to all of these guidelines. A review of current work and literature in the area of alternate gate dielectrics is given. Based on reported results and fundamental considerations, the pseudobinary materials systems offer large flexibility and show the most promise toward success...

Design of Analog CMOS Integrated Circuits

Abstract: The CMOS technology area has quickly grown, calling for a new text--and here it is, covering the analysis and design of CMOS integrated circuits that practicing engineers need to master to succeed. Filled with many examples and chapter-ending problems, the book not only describes the thought process behind each circuit topology, but also considers the rationale behind each modification. The analysis and design techniques focus on CMOS circuits but also apply to other IC technologies. Table of contents 1 Introduction to Analog Design 2 Basic MOS Device Physics 3 Single-Stage Amplifiers 4 Differential Amplifiers 5 Passive and Active Current Mirrors 6 Frequency Response of Amplifiers 7 Noise 8 Feedback 9 Operational Amplifiers 10 Stability and Frequency Compensation 11 Bandgap References 12 Introduction to Switched-Capacitor Circuits 13 Nonlinearity and Mismatch 14 Oscillators 15 Phase-Locked Loops 16 Short-Channel Effects and Device Models 17 CMOS Processing Technology 18 Layout and Packaging

Prospects of Colloidal Nanocrystals for Electronic and Optoelectronic Applications

Abstract: Nanocrystals (NCs) discussed in this Review are tiny crystals of metals, semiconductors, and magnetic material consisting of hundreds to a few thousand atoms each. Their size ranges from 2-3 to about 20 nm. What is special about this size regime that placed NCs among the hottest research topics of the last decades? The quantum mechanical coupling * To whom correspondence should be addressed. E-mail: dvtalapin@uchicago.edu. † The University of Chicago. ‡ Argonne National Lab. Chem. Rev. 2010, 110, 389–458 389