Chia-Hong Jan

Bio: Chia-Hong Jan is an academic researcher from Intel. The author has contributed to research in topics: Transistor & Gate dielectric. The author has an hindex of 25, co-authored 103 publications receiving 3509 citations.

A 90-nm logic technology featuring strained-silicon

Abstract: A leading-edge 90-nm technology with 1.2-nm physical gate oxide, 45-nm gate length, strained silicon, NiSi, seven layers of Cu interconnects, and low-/spl kappa/ CDO for high-performance dense logic is presented. Strained silicon is used to increase saturated n-type and p-type metal-oxide-semiconductor field-effect transistors (MOSFETs) drive currents by 10% and 25%, respectively. Using selective epitaxial Si/sub 1-x/Ge/sub x/ in the source and drain regions, longitudinal uniaxial compressive stress is introduced into the p-type MOSEFT to increase hole mobility by >50%. A tensile silicon nitride-capping layer is used to introduce tensile strain into the n-type MOSFET and enhance electron mobility by 20%. Unlike all past strained-Si work, the hole mobility enhancement in this paper is present at large vertical electric fields in nanoscale transistors making this strain technique useful for advanced logic technologies. Furthermore, using piezoresistance coefficients it is shown that significantly less strain (/spl sim/5 /spl times/) is needed for a given PMOS mobility enhancement when applied via longitudinal uniaxial compression versus in-plane biaxial tension using the conventional Si/sub 1-x/Ge/sub x/ substrate approach.

A 90 nm logic technology featuring 50 nm strained silicon channel transistors, 7 layers of Cu interconnects, low k ILD, and 1 /spl mu/m/sup 2/ SRAM cell

Abstract: A leading edge 90 nm technology with 1.2 nm physical gate oxide, 50 nm gate length, strained silicon, NiSi, 7 layers of Cu interconnects, and low k carbon-doped oxide (CDO) for high performance dense logic is presented. Strained silicon is used to increase saturated NMOS and PMOS drive currents by 10-20% and mobility by >50%. Aggressive design rules and unlanded contacts offer a 1.0 /spl mu/m/sup 2/ 6-T SRAM cell using 193 nm lithography.

A 22nm SoC platform technology featuring 3-D tri-gate and high-k/metal gate, optimized for ultra low power, high performance and high density SoC applications

Abstract: A leading edge 22nm 3-D tri-gate transistor technology has been optimized for low power SoC products for the first time. Low standby power and high voltage transistors exploiting the superior short channel control, < 65mV/dec subthreshold slope and <40mV DIBL, of the Tri-Gate architecture have been fabricated concurrently with high speed logic transistors in a single SoC chip to achieve industry leading drive currents at record low leakage levels. NMOS/PMOS Idsat=0.41/0.37mA/um at 30pA/um Ioff, 0.75V, were used to build a low standby power 380Mb SRAM capable of operating at 2.6GHz with 10pA/cell standby leakages. This technology offers mix-and-match flexibility of transistor types, high-density interconnect stacks, and RF/mixed-signal features for leadership in mobile, handheld, wireless and embedded SoC products.

Device structure and method for reducing silicide encroachment

Abstract: A semiconductor device having a novel spacer structure and method of fabrication. The present invention describes a semiconductor device which has an electrode with a first thickness. A silicide layer having a second thickness is formed on the electrode. A sidewall spacer which is formed adjacent to the electrode has a height which is greater than the sum of the thickness of the electrode and the thickness of the silicide layer.

Novel transistor with ultra shallow tip and method of fabrication

Abstract: A novel transistor (200) with a low resistance ultra shallow tip region (214) and its method of fabrication. The novel transistor of the present invention has a source/drain extension or tip region (210) comprising an ultra shallow region (214) which extends beneath the gate electrode and a raised region (216).

Electronics based on two-dimensional materials

Abstract: The compelling demand for higher performance and lower power consumption in electronic systems is the main driving force of the electronics industry's quest for devices and/or architectures based on new materials. Here, we provide a review of electronic devices based on two-dimensional materials, outlining their potential as a technological option beyond scaled complementary metal-oxide-semiconductor switches. We focus on the performance limits and advantages of these materials and associated technologies, when exploited for both digital and analog applications, focusing on the main figures of merit needed to meet industry requirements. We also discuss the use of two-dimensional materials as an enabling factor for flexible electronics and provide our perspectives on future developments.

Nanowire transistors without junctions

Abstract: All existing transistors are based on the use of semiconductor junctions formed by introducing dopant atoms into the semiconductor material. As the distance between junctions in modern devices drops below 10 nm, extraordinarily high doping concentration gradients become necessary. Because of the laws of diffusion and the statistical nature of the distribution of the doping atoms, such junctions represent an increasingly difficult challenge for the semiconductor industry. Here, we propose and demonstrate a new type of transistor in which there are no junctions and no doping concentration gradients. These devices have full CMOS functionality and are made using silicon nanowires. They have near-ideal subthreshold slope, extremely low leakage currents, and less degradation of mobility with gate voltage and temperature than classical transistors.

Valleytronics in 2D materials

Abstract: Semiconductor technology is currently based on the manipulation of electronic charge; however, electrons have additional degrees of freedom, such as spin and valley, that can be used to encode and process information. Over the past several decades, there has been significant progress in manipulating electron spin for semiconductor spintronic devices, motivated by potential spin-based information processing and storage applications. However, experimental progress towards manipulating the valley degree of freedom for potential valleytronic devices has been limited until very recently. We review the latest advances in valleytronics, which have largely been enabled by the isolation of 2D materials (such as graphene and semiconducting transition metal dichalcogenides) that host an easily accessible electronic valley degree of freedom, allowing for dynamic control. The energy extrema of an electronic band are referred to as valleys. In 2D materials, two distinguishable valleys can be used to encode information and explore other valleytronic applications.

Stretchable and foldable silicon integrated circuits.

Abstract: We have developed a simple approach to high-performance, stretchable, and foldable integrated circuits. The systems integrate inorganic electronic materials, including aligned arrays of nanoribbons of single crystalline silicon, with ultrathin plastic and elastomeric substrates. The designs combine multilayer neutral mechanical plane layouts and "wavy" structural configurations in silicon complementary logic gates, ring oscillators, and differential amplifiers. We performed three-dimensional analytical and computational modeling of the mechanics and the electronic behaviors of these integrated circuits. Collectively, the results represent routes to devices, such as personal health monitors and other biomedical devices, that require extreme mechanical deformations during installation/use and electronic properties approaching those of conventional systems built on brittle semiconductor wafers.

Semiconductor device, and manufacturing method thereof

Abstract: An object is to provide a semiconductor device of which a manufacturing process is not complicated and by which cost can be suppressed, by forming a thin film transistor using an oxide semiconductor film typified by zinc oxide, and a manufacturing method thereof. For the semiconductor device, a gate electrode is formed over a substrate; a gate insulating film is formed covering the gate electrode; an oxide semiconductor film is formed over the gate insulating film; and a first conductive film and a second conductive film are formed over the oxide semiconductor film. The oxide semiconductor film has at least a crystallized region in a channel region.