scispace - formally typeset
Search or ask a question
Author

Chongjun Jin

Bio: Chongjun Jin is an academic researcher from Sun Yat-sen University. The author has contributed to research in topics: Photonic crystal & Plasmon. The author has an hindex of 24, co-authored 87 publications receiving 2839 citations. Previous affiliations of Chongjun Jin include Chinese Academy of Sciences & University of St Andrews.


Papers
More filters
Journal ArticleDOI
TL;DR: This work describes an array of submicrometer gold mushrooms with a FOM reaching ~108, which is comparable to the theoretically predicted upper limit for standard PSPR sensors, and demonstrates the array as a biosensor for detecting cytochrome c and alpha-fetoprotein, suggesting that the array is a promising candidate for label-free biomedical sensing.
Abstract: Localized surface plasmon resonance (LSPR)-based sensing has found wide applications in medical diagnosis, food safety regulation and environmental monitoring. Compared with commercial propagating surface plasmon resonance (PSPR)-based sensors, LSPR ones are simple, cost-effective and suitable for measuring local refractive index changes. However, the figure of merit (FOM) values of LSPR sensors are generally 1-2 orders of magnitude smaller than those of PSPR ones, preventing the widespread use of LSPR sensors. Here we describe an array of submicrometer gold mushrooms with a FOM reaching ~108, which is comparable to the theoretically predicted upper limit for standard PSPR sensors. Such a high FOM arises from the interference between Wood's anomaly and the LSPRs. We further demonstrate the array as a biosensor for detecting cytochrome c and alpha-fetoprotein, with their detection limits down to 200 pM and 15 ng ml(-1), respectively, suggesting that the array is a promising candidate for label-free biomedical sensing.

631 citations

Journal ArticleDOI
TL;DR: In this article, the authors present two strongly photoluminescent polymorphs (Cg and Cb) with distinctly different ML activities based on a tetraphenylethene derivative P4TA.
Abstract: Organic materials exhibiting mechanoluminescence (ML) are promising for usage in displays, lighting and sensing. However, the mechanism for ML generation remains unclear, and the light-emitting performance of organic ML materials in the solid state has been severely limited by an aggregation-caused quenching (ACQ) effect. Herein, we present two strongly photoluminescent polymorphs (i.e., Cg and Cb) with distinctly different ML activities based on a tetraphenylethene derivative P4TA. As an aggregation-induced emission (AIE) emitter, P4TA perfectly surmounted the ACQ, making the resultant block-like crystals in the Cg phase exhibit brilliant green ML under daylight at room temperature. The ML-inactive prism-like crystals Cb can also have their ML turned on by transitioning toward Cg with the aid of dichloromethane vapor. Moreover, the Cg polymorph shows ML and mechanochromism simultaneously and respectively without and with UV irradiation under a force stimulus, thus suggesting a feasible design direction for the development of efficient and multifunctional ML materials.

249 citations

Journal ArticleDOI
TL;DR: The proposed formation mechanism of the hollow CaTiO(3) crystals would enable us to control the microstructures of these materials and to explain the formation of many other hollow crystals.
Abstract: The crystal growth of CaTiO3 hollow crystals with different microstructures has been investigated. In a water-free poly(ethylene glycol) 200 (PEG-200) solution, CaTiO3 nanocubes formed first. The nanocubes underwent an oriented self-assembly into spherical particles, enhanced by the surface-adsorbed polymer molecules. Since the growth of nanocubes and their aggregation took place simultaneously, the nanocubes in the outer shells were larger than those in the cores. Disappearance of the small nanocubes in the cores of the spheres during an Ostwald ripening process led to spherical hollow crystals. Addition of a small amount of water (1.25 vol %) in the polymer solution enhanced surface recrystallization of the aggregated spheres, forming a cubic morphology. The orthorhombic distortion of the perovskite CaTiO3 structure did not have a significant effect on the nanocube aggregation, resulting in a domain structure in the shells. Single-crystalline hollow cubes were produced with a slightly higher water conte...

187 citations

Journal ArticleDOI
TL;DR: In this article, a dual-emissive compound, SCP, with an asymmetric molecular structure that fully inherits the photophysical properties of the parent molecules SC2 and SP2 was reported.
Abstract: Achieving high contrast mechanochromism (Δλem,max > 100 nm) and white-light emission under mild conditions from a single compound with a simple structure is a great challenge. Herein, we report a novel dual-emissive compound, namely SCP, with an asymmetric molecular structure that fully inherits the photophysical properties of the parent molecules SC2 and SP2. SCP shows high contrast, linearly tunable mechanochromism and bright white-light emission arising from a combination of traditional fluorescence and thermally activated delayed fluorescence (TADF). The origin of the dual-emission for SCP was demonstrated based on the analysis of the white-emitting single crystals. In addition, a mechanism of luminochromism for SCP driven by the application of mechanical force is proposed. These observations present a rational design strategy for the development of high performance multi-functional materials for white-light emission.

184 citations

Journal ArticleDOI
TL;DR: In this paper, a two-dimensional octagonal quasiperiodic photonic crystal composed of alumina cylinders is prepared and the transmission spectra of the quasicrystal are measured in the microwave region for the TM wave.
Abstract: A two-dimensional octagonal quasiperiodic photonic crystal composed of alumina cylinders is prepared The transmission spectra of the quasicrystal are measured in the microwave region for the TM wave We find that the position and width of the band gap do not depend on the incident direction, while the band structure can appear for quite a small piece of the quasicrystal Two types of waveguide, a straight guide and a bending guide with two sharp 90° corners, are fabricated by removing three rows of cylinders The measured transmittances show that the guiding efficiency for both waveguides is high

179 citations


Cited by
More filters
Journal ArticleDOI

[...]

08 Dec 2001-BMJ
TL;DR: There is, I think, something ethereal about i —the square root of minus one, which seems an odd beast at that time—an intruder hovering on the edge of reality.
Abstract: There is, I think, something ethereal about i —the square root of minus one. I remember first hearing about it at school. It seemed an odd beast at that time—an intruder hovering on the edge of reality. Usually familiarity dulls this sense of the bizarre, but in the case of i it was the reverse: over the years the sense of its surreal nature intensified. It seemed that it was impossible to write mathematics that described the real world in …

33,785 citations

Proceedings Article
01 Jan 1999
TL;DR: In this paper, the authors describe photonic crystals as the analogy between electron waves in crystals and the light waves in artificial periodic dielectric structures, and the interest in periodic structures has been stimulated by the fast development of semiconductor technology that now allows the fabrication of artificial structures, whose period is comparable with the wavelength of light in the visible and infrared ranges.
Abstract: The term photonic crystals appears because of the analogy between electron waves in crystals and the light waves in artificial periodic dielectric structures. During the recent years the investigation of one-, two-and three-dimensional periodic structures has attracted a widespread attention of the world optics community because of great potentiality of such structures in advanced applied optical fields. The interest in periodic structures has been stimulated by the fast development of semiconductor technology that now allows the fabrication of artificial structures, whose period is comparable with the wavelength of light in the visible and infrared ranges.

2,722 citations

Journal Article
TL;DR: In this article, a class of π;-conjugated compounds that exhibit large δ (as high as 1, 250 × 10−50 cm4 s per photon) and enhanced two-photon sensitivity relative to ultraviolet initiators were developed and used to demonstrate a scheme for three-dimensional data storage which permits fluorescent and refractive read-out, and the fabrication of 3D micro-optical and micromechanical structures, including photonic-bandgap-type structures.
Abstract: Two-photon excitation provides a means of activating chemical or physical processes with high spatial resolution in three dimensions and has made possible the development of three-dimensional fluorescence imaging, optical data storage, and lithographic microfabrication. These applications take advantage of the fact that the two-photon absorption probability depends quadratically on intensity, so under tight-focusing conditions, the absorption is confined at the focus to a volume of order λ3 (where λ is the laser wavelength). Any subsequent process, such as fluorescence or a photoinduced chemical reaction, is also localized in this small volume. Although three-dimensional data storage and microfabrication have been illustrated using two-photon-initiated polymerization of resins incorporating conventional ultraviolet-absorbing initiators, such photopolymer systems exhibit low photosensitivity as the initiators have small two-photon absorption cross-sections (δ). Consequently, this approach requires high laser power, and its widespread use remains impractical. Here we report on a class of π;-conjugated compounds that exhibit large δ (as high as 1, 250 × 10−50 cm4 s per photon) and enhanced two-photon sensitivity relative to ultraviolet initiators. Two-photon excitable resins based on these new initiators have been developed and used to demonstrate a scheme for three-dimensional data storage which permits fluorescent and refractive read-out, and the fabrication of three-dimensional micro-optical and micromechanical structures, including photonic-bandgap-type structures.

1,833 citations

Journal ArticleDOI
TL;DR: This review summarizes and discusses the latest progress concerning this rapidly developing research field, in which the majority of the reported TADF systems are discussed, along with their derived structure-property relationships, TadF mechanisms and applications.
Abstract: Organic materials that exhibit thermally activated delayed fluorescence (TADF) are an attractive class of functional materials that have witnessed a booming development in recent years. Since Adachi et al. reported high-performance TADF-OLED devices in 2012, there have been many reports regarding the design and synthesis of new TADF luminogens, which have various molecular structures and are used for different applications. In this review, we summarize and discuss the latest progress concerning this rapidly developing research field, in which the majority of the reported TADF systems are discussed, along with their derived structure–property relationships, TADF mechanisms and applications. We hope that such a review provides a clear outlook of these novel functional materials for a broad range of scientists within different disciplinary areas and attracts more researchers to devote themselves to this interesting research field.

1,566 citations

Journal ArticleDOI
TL;DR: The recent research activities in the synthesis of metal oxide hollow nanostructures with controlled shape, size, composition, and structural complexity, as well as their applications in LIBs are summarized.
Abstract: Metal oxide hollow structures have received great attention because of their many promising applications in a wide range of fields. As electrode materials for lithium-ion batteries (LIBs), metal oxide hollow structures provide high specific capacity, superior rate capability, and improved cycling performance. In this Research News, we summarize the recent research activities in the synthesis of metal oxide hollow nanostructures with controlled shape, size,composition, and structural complexity, as well as their applications in LIBs. By focusing on hollow structures of some binary metal oxides (such as SnO 2 ,TiO 2 , Fe 2 O 3 , Co 3 O 4 ) and complex metal oxides, we seek to provide some rational understanding on the effect of nanostructure engineering on the electrochemical performance of the active materials. It is thus anticipated that this article will shed some light on the development of advanced electrode materials for next-generation LIBs.

1,391 citations