Chris G. Van de Walle

Bio: Chris G. Van de Walle is an academic researcher from University of California, Santa Barbara. The author has contributed to research in topics: Band gap & Hydrogen. The author has an hindex of 86, co-authored 418 publications receiving 38456 citations. Previous affiliations of Chris G. Van de Walle include Xerox & Stanford University.

Fundamentals of zinc oxide as a semiconductor

Abstract: In the past ten years we have witnessed a revival of, and subsequent rapid expansion in, the research on zinc oxide (ZnO) as a semiconductor. Being initially considered as a substrate for GaN and related alloys, the availability of high-quality large bulk single crystals, the strong luminescence demonstrated in optically pumped lasers and the prospects of gaining control over its electrical conductivity have led a large number of groups to turn their research for electronic and photonic devices to ZnO in its own right. The high electron mobility, high thermal conductivity, wide and direct band gap and large exciton binding energy make ZnO suitable for a wide range of devices, including transparent thin-film transistors, photodetectors, light-emitting diodes and laser diodes that operate in the blue and ultraviolet region of the spectrum. In spite of the recent rapid developments, controlling the electrical conductivity of ZnO has remained a major challenge. While a number of research groups have reported achieving p-type ZnO, there are still problems concerning the reproducibility of the results and the stability of the p-type conductivity. Even the cause of the commonly observed unintentional n-type conductivity in as-grown ZnO is still under debate. One approach to address these issues consists of growing high-quality single crystalline bulk and thin films in which the concentrations of impurities and intrinsic defects are controlled. In this review we discuss the status of ZnO as a semiconductor. We first discuss the growth of bulk and epitaxial films, growth conditions and their influence on the incorporation of native defects and impurities. We then present the theory of doping and native defects in ZnO based on density-functional calculations, discussing the stability and electronic structure of native point defects and impurities and their influence on the electrical conductivity and optical properties of ZnO. We pay special attention to the possible causes of the unintentional n-type conductivity, emphasize the role of impurities, critically review the current status of p-type doping and address possible routes to controlling the electrical conductivity in ZnO. Finally, we discuss band-gap engineering using MgZnO and CdZnO alloys.

Native point defects in ZnO

Abstract: We have performed a comprehensive first-principles investigation of native point defects in ZnO based on density functional theory within the local density approximation (LDA) as well as the $\mathrm{LDA}+U$ approach for overcoming the band-gap problem. Oxygen deficiency, manifested in the form of oxygen vacancies and zinc interstitials, has long been invoked as the source of the commonly observed unintentional $n$-type conductivity in ZnO. However, contrary to the conventional wisdom, we find that native point defects are very unlikely to be the cause of unintentional $n$-type conductivity. Oxygen vacancies, which have most often been cited as the cause of unintentional doping, are deep rather than shallow donors and have high formation energies in $n$-type ZnO (and are therefore unlikely to form). Zinc interstitials are shallow donors, but they also have high formation energies in $n$-type ZnO and are fast diffusers with migration barriers as low as $0.57\phantom{\rule{0.3em}{0ex}}\mathrm{eV}$; they are therefore unlikely to be stable. Zinc antisites are also shallow donors but their high formation energies (even in Zn-rich conditions) render them unlikely to be stable under equilibrium conditions. We have, however, identified a different low-energy atomic configuration for zinc antisites that may play a role under nonequilibrium conditions such as irradiation. Zinc vacancies are deep acceptors and probably related to the frequently observed green luminescence; they act as compensating centers in $n$-type ZnO. Oxygen interstitials have high formation energies; they can occur as electrically neutral split interstitials in semi-insulating and $p$-type materials or as deep acceptors at octahedral interstitial sites in $n$-type ZnO. Oxygen antisites have very high formation energies and are unlikely to exist in measurable concentrations under equilibrium conditions. Based on our results for migration energy barriers, we calculate activation energies for self-diffusion and estimate defect-annealing temperatures. Our results provide a guide to more refined experimental studies of point defects in ZnO and their influence on the control of $p$-type doping.

First-principles calculations for defects and impurities: Applications to III-nitrides

Abstract: First-principles calculations have evolved from mere aids in explaining and supporting experiments to powerful tools for predicting new materials and their properties. In the first part of this review we describe the state-of-the-art computational methodology for calculating the structure and energetics of point defects and impurities in semiconductors. We will pay particular attention to computational aspects which are unique to defects or impurities, such as how to deal with charge states and how to describe and interpret transition levels. In the second part of the review we will illustrate these capabilities with examples for defects and impurities in nitride semiconductors. Point defects have traditionally been considered to play a major role in wide-band-gap semiconductors, and first-principles calculations have been particularly helpful in elucidating the issues. Specifically, calculations have shown that the unintentional n-type conductivity that has often been observed in as-grown GaN cannot be a...

Oxygen vacancies in ZnO

Abstract: The electronic properties of ZnO have traditionally been explained by invoking intrinsic defects In particular, the frequently observed unintentional n-type conductivity has often been attributed to oxygen vacancies We report first-principles calculations showing that the oxygen vacancy VO is not a shallow donor, but has a deep e(2+∕0) level at ∼10eV below the conduction band The negative-U behavior that causes the 1+charge state to be unstable is associated with large local lattice relaxations We present a detailed configuration coordinate diagram, which allows us to provide a detailed interpretation of recently reported ODEPR (optically detected electron paramagnetic resonance) measurements [L S Vlasenko and G D Watkins, Phys Rev B 71, 125210 (2005)]

First-principles calculations for point defects in solids

Abstract: Point defects and impurities strongly affect the physical properties of materials and have a decisive impact on their performance in applications. First-principles calculations have emerged as a powerful approach that complements experiments and can serve as a predictive tool in the identification and characterization of defects. The theoretical modeling of point defects in crystalline materials by means of electronic-structure calculations, with an emphasis on approaches based on density functional theory (DFT), is reviewed. A general thermodynamic formalism is laid down to investigate the physical properties of point defects independent of the materials class (semiconductors, insulators, and metals), indicating how the relevant thermodynamic quantities, such as formation energy, entropy, and excess volume, can be obtained from electronic structure calculations. Practical aspects such as the supercell approach and efficient strategies to extrapolate to the isolated-defect or dilute limit are discussed. Recent advances in tractable approximations to the exchange-correlation functional ($\mathrm{DFT}+U$, hybrid functionals) and approaches beyond DFT are highlighted. These advances have largely removed the long-standing uncertainty of defect formation energies in semiconductors and insulators due to the failure of standard DFT to reproduce band gaps. Two case studies illustrate how such calculations provide new insight into the physics and role of point defects in real materials.

QUANTUM ESPRESSO: a modular and open-source software project for quantum simulations of materials

Abstract: QUANTUM ESPRESSO is an integrated suite of computer codes for electronic-structure calculations and materials modeling, based on density-functional theory, plane waves, and pseudopotentials (norm-conserving, ultrasoft, and projector-augmented wave). The acronym ESPRESSO stands for opEn Source Package for Research in Electronic Structure, Simulation, and Optimization. It is freely available to researchers around the world under the terms of the GNU General Public License. QUANTUM ESPRESSO builds upon newly-restructured electronic-structure codes that have been developed and tested by some of the original authors of novel electronic-structure algorithms and applied in the last twenty years by some of the leading materials modeling groups worldwide. Innovation and efficiency are still its main focus, with special attention paid to massively parallel architectures, and a great effort being devoted to user friendliness. QUANTUM ESPRESSO is evolving towards a distribution of independent and interoperable codes in the spirit of an open-source project, where researchers active in the field of electronic-structure calculations are encouraged to participate in the project by contributing their own codes or by implementing their own ideas into existing codes.

A comprehensive review of zno materials and devices

Abstract: The semiconductor ZnO has gained substantial interest in the research community in part because of its large exciton binding energy (60meV) which could lead to lasing action based on exciton recombination even above room temperature. Even though research focusing on ZnO goes back many decades, the renewed interest is fueled by availability of high-quality substrates and reports of p-type conduction and ferromagnetic behavior when doped with transitions metals, both of which remain controversial. It is this renewed interest in ZnO which forms the basis of this review. As mentioned already, ZnO is not new to the semiconductor field, with studies of its lattice parameter dating back to 1935 by Bunn [Proc. Phys. Soc. London 47, 836 (1935)], studies of its vibrational properties with Raman scattering in 1966 by Damen et al. [Phys. Rev. 142, 570 (1966)], detailed optical studies in 1954 by Mollwo [Z. Angew. Phys. 6, 257 (1954)], and its growth by chemical-vapor transport in 1970 by Galli and Coker [Appl. Phys. ...

Band parameters for III–V compound semiconductors and their alloys

Abstract: We present a comprehensive, up-to-date compilation of band parameters for the technologically important III–V zinc blende and wurtzite compound semiconductors: GaAs, GaSb, GaP, GaN, AlAs, AlSb, AlP, AlN, InAs, InSb, InP, and InN, along with their ternary and quaternary alloys. Based on a review of the existing literature, complete and consistent parameter sets are given for all materials. Emphasizing the quantities required for band structure calculations, we tabulate the direct and indirect energy gaps, spin-orbit, and crystal-field splittings, alloy bowing parameters, effective masses for electrons, heavy, light, and split-off holes, Luttinger parameters, interband momentum matrix elements, and deformation potentials, including temperature and alloy-composition dependences where available. Heterostructure band offsets are also given, on an absolute scale that allows any material to be aligned relative to any other.

Progress, Challenges, and Opportunities in Two-Dimensional Materials Beyond Graphene

Abstract: Graphene’s success has shown that it is possible to create stable, single and few-atom-thick layers of van der Waals materials, and also that these materials can exhibit fascinating and technologically useful properties. Here we review the state-of-the-art of 2D materials beyond graphene. Initially, we will outline the different chemical classes of 2D materials and discuss the various strategies to prepare single-layer, few-layer, and multilayer assembly materials in solution, on substrates, and on the wafer scale. Additionally, we present an experimental guide for identifying and characterizing single-layer-thick materials, as well as outlining emerging techniques that yield both local and global information. We describe the differences that occur in the electronic structure between the bulk and the single layer and discuss various methods of tuning their electronic properties by manipulating the surface. Finally, we highlight the properties and advantages of single-, few-, and many-layer 2D materials in...