Christian Hupel

Bio: Christian Hupel is an academic researcher from Fraunhofer Society. The author has contributed to research in topics: Ytterbium & Fiber laser. The author has an hindex of 8, co-authored 32 publications receiving 400 citations.

Single mode 4.3 kW output power from a diode-pumped Yb-doped fiber amplifier.

Abstract: We investigate the average power scaling of two diode-pumped Yb-doped fiber amplifiers emitting a diffraction-limited beam. The first fiber under investigation with a core diameter of 30 µm was able to amplify a 10 W narrow linewidth seed laser up to 2.8 kW average output power before the onset of transverse mode instabilities (TMI). A further power scaling was achieved using a second fiber with a smaller core size (23µm), which allowed for a narrow linewidth output power of 3.5 kW limited by stimulated Brillouin scattering (SBS). We mitigated SBS using a spectral broadening mechanism, which allowed us to further increase the output power to 4.3 kW only limited by the available pump power. Up to this power level, a high slope efficiency of 90% with diffraction-limited beam quality and without any sign of TMI or stimulated Raman scattering for a spectral dynamic range of higher than -80 dB was obtained.

Narrow linewidth, single mode 3 kW average power from a directly diode pumped ytterbium-doped low NA fiber amplifier

Abstract: We report on a newly designed and fabricated ytterbium-doped large mode area fiber with an extremely low NA (~0.04) and related systematic investigations on fiber parameters that crucially influence the mode instability threshold. The fiber is used to demonstrate a narrow linewidth, continuous wave, single mode fiber laser amplifier emitting a maximum output power of 3 kW at a wavelength of 1070 nm without reaching the mode-instability threshold. A high slope efficiency of 90 %, excellent beam quality, high temporal stability, and an ASE suppression of 70 dB could be reached with a signal linewidth of only 170 pm.

Experimental investigations on the TMI thresholds of low-NA Yb-doped single-mode fibers

Abstract: In this contribution we investigate the transversal mode instability behavior of a ytterbium-doped commercial 20/400 fiber and obtain 2.9 kW of output power after optimizing the influencing parameters. In this context, we evaluate the influence of the bend diameter and the pump wavelength within the scope of the absorption length and the length of the fiber. Furthermore, with a newly developed fiber we report on 4.4 kW of single-mode output power at 40 cm bend diameter.

Coherently combined 16-channel multicore fiber laser system.

Abstract: We present a coherently combined laser amplifier with 16 channels from a multicore fiber in a proof-of-principle demonstration. Filled-aperture beam splitting and combination, together with temporal phasing, is realized in a compact and low-component-count setup. Combined average power of up to 70 W with 40 ps pulses is achieved with combination efficiencies around 80%.

Laser cooling of ytterbium-doped silica glass

Abstract: Laser cooling of a solid is achieved when a coherent laser illuminates the material in the red tail of its absorption spectrum, and the heat is carried out by anti-Stokes fluorescence of the blue-shifted photons. Solid-state laser cooling has been successfully demonstrated in several materials, including rare-earth-doped crystals and glasses. Here we show the net cooling of high-purity Yb-doped silica glass samples that are fabricated with low impurities to reduce their parasitic background loss for fiber laser applications. The non-radiative decay rate of the excited state in Yb ions is very small in these glasses due to the low level of impurities, resulting in near-unity quantum efficiency. We report the measurement of the cooling efficiency as a function of the laser wavelength, from which the quantum efficiency of the Yb-doped silica is calculated. Laser cooling of rare-earth-doped silica may provide a route to vibration-free refrigeration of integrated photonic circuits and quantum sensors to reduce the thermal noise. Here, cooling of high-purity Yb-doped silica to 0.7 K below ambient temperature is demonstrated using sub-optimal laser parameters, and in spite of a substantial extra thermal load.

Petawatt and exawatt class lasers worldwide

Abstract: In the 2015 review paper 'Petawatt Class Lasers Worldwide' a comprehensive overview of the current status of highpower facilities of >200 TW was presented. This was largely based on facility specifications, with some description of their uses, for instance in fundamental ultra-high-intensity interactions, secondary source generation, and inertial confinement fusion (ICF). With the 2018 Nobel Prize in Physics being awarded to Professors Donna Strickland and Gerard Mourou for the development of the technique of chirped pulse amplification (CPA), which made these lasers possible, we celebrate by providing a comprehensive update of the current status of ultra-high-power lasers and demonstrate how the technology has developed. We are now in the era of multi-petawatt facilities coming online, with 100 PW lasers being proposed and even under construction. In addition to this there is a pull towards development of industrial and multidisciplinary applications, which demands much higher repetition rates, delivering high-average powers with higher efficiencies and the use of alternative wavelengths: mid-IR facilities. So apart from a comprehensive update of the current global status, we want to look at what technologies are to be deployed to get to these new regimes, and some of the critical issues facing their development.

Single mode 4.3 kW output power from a diode-pumped Yb-doped fiber amplifier.

Abstract: We investigate the average power scaling of two diode-pumped Yb-doped fiber amplifiers emitting a diffraction-limited beam. The first fiber under investigation with a core diameter of 30 µm was able to amplify a 10 W narrow linewidth seed laser up to 2.8 kW average output power before the onset of transverse mode instabilities (TMI). A further power scaling was achieved using a second fiber with a smaller core size (23µm), which allowed for a narrow linewidth output power of 3.5 kW limited by stimulated Brillouin scattering (SBS). We mitigated SBS using a spectral broadening mechanism, which allowed us to further increase the output power to 4.3 kW only limited by the available pump power. Up to this power level, a high slope efficiency of 90% with diffraction-limited beam quality and without any sign of TMI or stimulated Raman scattering for a spectral dynamic range of higher than -80 dB was obtained.

Materials for optical fiber lasers: A review

Abstract: Over the past two decades, fiber laser technologies have matured to such an extent that they have captured a large portion of the commercial laser marketplace. Yet, there still is a seemingly unquenchable thirst for ever greater optical power to levels where certain deleterious light-matter interactions that limit continued power scaling become significant. In the past decade or so, the industry has focused mainly on waveguide engineering to overcome many of these hurdles. However, there is an emerging body of work emphasizing the enabling role of the material. In an effort to underpin these developments, this paper reviews the relevance of the material in high power fiber laser technologies. As the durable material-of-choice for the application, the discussion will mainly be limited to silicate host glasses. The discussion presented herein follows an outward path, starting with the trivalent rare earth ions and their spectroscopic properties. The ion then is placed into a host, whose impact on the spectroscopy is reviewed. Finally, adverse interactions between the laser lightwave and the host are discussed, and novel composition glass fiber design and fabrication methodologies are presented. With deference to the symbiosis required between material and waveguide engineering in active fiber development, this review will emphasize the former. Specifically, where appropriate, materials-based paths to the enhancement of laser performance will be underscored.

Transverse mode instability

Abstract: This work presents a review on the effect of transverse mode instability in high-power fiber laser systems and the corresponding investigations led worldwide over the past decade. This paper includes a description of the experimental observations and the physical origin of this effect, as well as some of the proposed mitigation strategies.

High power fibre lasers

Abstract: Recent progress in the development of high power fibre lasers will be reviewed, and the prospects for scaling output powers to well beyond the hundred watt level, whilst maintaining diffraction-limited beam quality will be discussed