Author
Chuanfang John Zhang
Other affiliations: Drexel University
Bio: Chuanfang John Zhang is an academic researcher from Trinity College, Dublin. The author has contributed to research in topics: MXenes & Stamping. The author has an hindex of 10, co-authored 12 publications receiving 2601 citations. Previous affiliations of Chuanfang John Zhang include Drexel University.
Topics: MXenes, Stamping, Nanotube, Nanosheet, Conductive polymer
Papers
More filters
TL;DR: In this article, the degradation of delaminated-Ti3C2Tx colloidal solutions was investigated and protocols to improve their stability were proposed. But the degradation was limited to 5, 10, and 15 days.
Abstract: Two-dimensional (2D) transition metal carbides and nitrides (MXenes) have shown outstanding performances in electrochemical energy storage and many other applications. Delamination of MXene flakes in water produces colloidal solutions that are used to manufacture all kinds of products (thin films, coatings, and electrodes, etc.). However, the stability of MXene colloidal solutions, which is of critical importance to their application, remains largely unexplored. Here we report on the degradation of delaminated-Ti3C2Tx colloidal solutions (T represents the surface functionalities) and outline protocols to improve their stability. Ti3C2Tx MXene solutions in open vials degraded by 42%, 85%, and 100% after 5, 10, and 15 days, respectively, leading to the formation of cloudy-white colloidal solutionss containing primarily anatase (TiO2). On the other hand, the solution could be well-preserved when Ti3C2Tx MXene colloidal solutionss were stored in hermetic Ar-filled bottles at 5 °C, because dissolved oxygen, th...
935 citations
TL;DR: Collectively, the Ti3 C2 Tx films are among the state-of-the-art for future transparent, conductive, capacitive electrodes, and translate into technologically viable devices for next-generation wearable, portable electronics.
Abstract: 2D transition-metal carbides and nitrides, known as MXenes, have displayed promising properties in numerous applications, such as energy storage, electromagnetic interference shielding, and catalysis. Titanium carbide MXene (Ti3 C2 Tx ), in particular, has shown significant energy-storage capability. However, previously, only micrometer-thick, nontransparent films were studied. Here, highly transparent and conductive Ti3 C2 Tx films and their application as transparent, solid-state supercapacitors are reported. Transparent films are fabricated via spin-casting of Ti3 C2 Tx nanosheet colloidal solutions, followed by vacuum annealing at 200 °C. Films with transmittance of 93% (≈4 nm) and 29% (≈88 nm) demonstrate DC conductivity of ≈5736 and ≈9880 S cm-1 , respectively. Such highly transparent, conductive Ti3 C2 Tx films display impressive volumetric capacitance (676 F cm-3 ) combined with fast response. Transparent solid-state, asymmetric supercapacitors (72% transmittance) based on Ti3 C2 Tx and single-walled carbon nanotube (SWCNT) films are also fabricated. These electrodes exhibit high capacitance (1.6 mF cm-2 ) and energy density (0.05 µW h cm-2 ), and long lifetime (no capacitance decay over 20 000 cycles), exceeding that of graphene or SWCNT-based transparent supercapacitor devices. Collectively, the Ti3 C2 Tx films are among the state-of-the-art for future transparent, conductive, capacitive electrodes, and translate into technologically viable devices for next-generation wearable, portable electronics.
751 citations
TL;DR: Highly concentrated, additive-free, aqueous and organic MXene-based inks that can be used for high-resolution extrusion and inkjet printing are reported.
Abstract: Direct printing of functional inks is critical for applications in diverse areas including electrochemical energy storage, smart electronics and healthcare. However, the available printable ink formulations are far from ideal. Either surfactants/additives are typically involved or the ink concentration is low, which add complexity to the manufacturing and compromises the printing resolution. Here, we demonstrate two types of two-dimensional titanium carbide (Ti3C2Tx) MXene inks, aqueous and organic in the absence of any additive or binary-solvent systems, for extrusion printing and inkjet printing, respectively. We show examples of all-MXene-printed structures, such as micro-supercapacitors, conductive tracks and ohmic resistors on untreated plastic and paper substrates, with high printing resolution and spatial uniformity. The volumetric capacitance and energy density of the all-MXene-printed micro-supercapacitors are orders of magnitude greater than existing inkjet/extrusion-printed active materials. The versatile direct-ink-printing technique highlights the promise of additive-free MXene inks for scalable fabrication of easy-to-integrate components of printable electronics.
611 citations
TL;DR: In this article, a scalable, low-cost stamping strategy was used to produce flexible all-MXene MSCs with controlled architectures, which can be easily scaled up by designing pad or cylindrical stamps, followed by a cold rolling process.
Abstract: The fast growth of portable smart electronics and internet of things have greatly stimulated the demand for miniaturized energy storage devices. Micro-supercapacitors (MSCs), which can provide high power density and a long lifetime, are ideal stand-alone power sources for smart microelectronics. However, relatively few MSCs exhibit both high areal and volumetric capacitance. Here rapid production of flexible MSCs is demonstrated through a scalable, low-cost stamping strategy. Combining 3D-printed stamps with arbitrary shapes and 2D titanium carbide or carbonitride inks (Ti3C2Tx and Ti3CNTx, respectively, known as MXenes), flexible all-MXene MSCs with controlled architectures are produced. The interdigitated Ti3C2Tx MSC exhibits high areal capacitance: 61 mF cm−2 at 25 μA cm−2 and 50 mF cm−2 as the current density increases by 32 fold. The Ti3C2Tx MSCs also showcase capacitive charge storage properties, good cycling lifetime, high energy and power densities, etc. The production of such high-performance Ti3C2Tx MSCs can be easily scaled up by designing pad or cylindrical stamps, followed by a cold rolling process. Collectively, the rapid, efficient production of flexible allMXene MSCs with state-of-the-art performance opens new exciting opportunities for future applications in wearable and portable electronics.
457 citations
TL;DR: Silicon nanoparticle-based lithium-ion battery negative electrodes where multiple nonactive electrode additives are replaced with a single conductive binder, in this case, the conducting polymer PEDOT PSS are described.
Abstract: This work describes silicon nanoparticle-based lithium-ion battery negative electrodes where multiple nonactive electrode additives (usually carbon black and an inert polymer binder) are replaced with a single conductive binder, in this case, the conducting polymer PEDOT:PSS. While enabling the production of well-mixed slurry-cast electrodes with high silicon content (up to 95 wt %), this combination eliminates the well-known occurrence of capacity losses due to physical separation of the silicon and traditional inorganic conductive additives during repeated lithiation/delithiation processes. Using an in situ secondary doping treatment of the PEDOT:PSS with small quantities of formic acid, electrodes containing 80 wt % SiNPs can be prepared with electrical conductivity as high as 4.2 S/cm. Even at the relatively high areal loading of 1 mg/cm2, this system demonstrated a first cycle lithiation capacity of 3685 mA·h/g (based on the SiNP mass) and a first cycle efficiency of ∼78%. After 100 repeated cycles a...
369 citations
Cited by
More filters
TL;DR: Two-dimensional transition metal carbides, carbonitrides, and nitrides (MXenes) were discovered in 2011 and more than 20 different compositions have been synthesized by the selective etching of MAX phase and other precursors and many more theoretically predicted as mentioned in this paper.
Abstract: Two-dimensional (2D) transition metal carbides, carbonitrides, and nitrides (MXenes) were discovered in 2011. Since the original discovery, more than 20 different compositions have been synthesized by the selective etching of MAX phase and other precursors and many more theoretically predicted. They offer a variety of different properties, making the family promising candidates in a wide range of applications, such as energy storage, electromagnetic interference shielding, water purification, electrocatalysis, and medicine. These solution-processable materials have the potential to be highly scalable, deposited by spin, spray, or dip coating, painted or printed, or fabricated in a variety of ways. Due to this promise, the amount of research on MXenes has been increasing, and methods of synthesis and processing are expanding quickly. The fast evolution of the material can also be noticed in the wide range of synthesis and processing protocols that determine the yield of delamination, as well as the quality...
2,559 citations
TL;DR: For the first time, an efficient and facile approach is reported to fabricate freestanding, flexible, and hydrophobic MXene foam with reasonable strength by assembling MXene sheets into films followed by a hydrazine-induced foaming process.
Abstract: Ultrathin, lightweight, and flexible electromagnetic-interference (EMI) shielding materials are urgently required to manage increasingly serious radiation pollution. 2D transition-metal carbides (MXenes) are considered promising alternatives to graphene for providing excellent EMI-shielding performance due to their outstanding metallic electrical conductivity. However, the hydrophilicity of MXene films may affect their stability and reliability when applied in moist or wet environments. Herein, for the first time, an efficient and facile approach is reported to fabricate freestanding, flexible, and hydrophobic MXene foam with reasonable strength by assembling MXene sheets into films followed by a hydrazine-induced foaming process. In striking contrast to well-known hydrophilic MXene materials, the MXene foams surprisingly exhibit hydrophobic surfaces and outstanding water resistance and durability. More interestingly, a much enhanced EMI-shielding effectiveness of ≈70 dB is achieved for the lightweight MXene foam as compared to its unfoamed film counterpart (53 dB) due to the highly efficient wave attenuation in the favorable porous structure. Therefore, the hydrophobic, flexible, and lightweight MXene foam with an excellent EMI-shielding performance is highly promising for applications in aerospace and portable and wearable smart electronics.
1,241 citations
TL;DR: The state-of-the-art advancements in FSSCs are reviewed to provide new insights on mechanisms, emerging electrode materials, flexible gel electrolytes and novel cell designs.
Abstract: Flexible solid-state supercapacitors (FSSCs) are frontrunners in energy storage device technology and have attracted extensive attention owing to recent significant breakthroughs in modern wearable electronics In this study, we review the state-of-the-art advancements in FSSCs to provide new insights on mechanisms, emerging electrode materials, flexible gel electrolytes and novel cell designs The review begins with a brief introduction on the fundamental understanding of charge storage mechanisms based on the structural properties of electrode materials The next sections briefly summarise the latest progress in flexible electrodes (ie, freestanding and substrate-supported, including textile, paper, metal foil/wire and polymer-based substrates) and flexible gel electrolytes (ie, aqueous, organic, ionic liquids and redox-active gels) Subsequently, a comprehensive summary of FSSC cell designs introduces some emerging electrode materials, including MXenes, metal nitrides, metal–organic frameworks (MOFs), polyoxometalates (POMs) and black phosphorus Some potential practical applications, such as the development of piezoelectric, photo-, shape-memory, self-healing, electrochromic and integrated sensor-supercapacitors are also discussed The final section highlights current challenges and future perspectives on research in this thriving field
1,210 citations
TL;DR: The potential of MXenes for the photocatalytic degradation of organic pollutants in water, such as dye waste, is addressed, along with their promise as catalysts for ammonium synthesis from nitrogen.
Abstract: Transition metal carbides and nitrides (MXenes), a family of two-dimensional (2D) inorganic compounds, are materials composed of a few atomic layers of transition metal carbides, nitrides, or carbonitrides. Ti3C2, the first 2D layered MXene, was isolated in 2011. This material, which is a layered bulk material analogous to graphite, was derived from its 3D phase, Ti3AlC2 MAX. Since then, material scientists have either determined or predicted the stable phases of >200 different MXenes based on combinations of various transition metals such as Ti, Mo, V, Cr, and their alloys with C and N. Extensive experimental and theoretical studies have shown their exciting potential for energy conversion and electrochemical storage. To this end, we comprehensively summarize the current advances in MXene research. We begin by reviewing the structure types and morphologies and their fabrication routes. The review then discusses the mechanical, electrical, optical, and electrochemical properties of MXenes. The focus then turns to their exciting potential in energy storage and conversion. Energy storage applications include electrodes in rechargeable lithium- and sodium-ion batteries, lithium-sulfur batteries, and supercapacitors. In terms of energy conversion, photocatalytic fuel production, such as hydrogen evolution from water splitting, and carbon dioxide reduction are presented. The potential of MXenes for the photocatalytic degradation of organic pollutants in water, such as dye waste, is also addressed, along with their promise as catalysts for ammonium synthesis from nitrogen. Finally, their application potential is summarized.
1,201 citations
TL;DR: Examples indicate that nanostructured materials and nanoarchitectured electrodes can provide solutions for designing and realizing high-energy, high-power, and long-lasting energy storage devices.
Abstract: Lithium-ion batteries, which power portable electronics, electric vehicles, and stationary storage, have been recognized with the 2019 Nobel Prize in chemistry. The development of nanomaterials and their related processing into electrodes and devices can improve the performance and/or development of the existing energy storage systems. We provide a perspective on recent progress in the application of nanomaterials in energy storage devices, such as supercapacitors and batteries. The versatility of nanomaterials can lead to power sources for portable, flexible, foldable, and distributable electronics; electric transportation; and grid-scale storage, as well as integration in living environments and biomedical systems. To overcome limitations of nanomaterials related to high reactivity and chemical instability caused by their high surface area, nanoparticles with different functionalities should be combined in smart architectures on nano- and microscales. The integration of nanomaterials into functional architectures and devices requires the development of advanced manufacturing approaches. We discuss successful strategies and outline a roadmap for the exploitation of nanomaterials for enabling future energy storage applications, such as powering distributed sensor networks and flexible and wearable electronics.
941 citations