D. Du

Bio: D. Du is an academic researcher from University of Michigan. The author has contributed to research in topics: Laser & Femtosecond. The author has an hindex of 11, co-authored 21 publications receiving 3289 citations.

Self-channeling of high-peak-power femtosecond laser pulses in air

Abstract: The self-channeling of ultrashort laser pulses through 20 m of air was demonstrated. The channeled pulse was measured to have 0.75 mJ of energy, a diameter of 80 microm FWHM, and a modulated spectrum. All these values were measured to be fairly constant during the propagation of the pulse. A preliminary model is shown to explain these results.

Laser‐induced breakdown by impact ionization in SiO2 with pulse widths from 7 ns to 150 fs

Abstract: Results of laser‐induced breakdown experiments in fused silica (SiO2) employing 150 fs–7 ns, 780 nm laser pulses are reported. The avalanche ionization mechanism is found to dominate over the entire pulse‐width range. Fluence breakdown threshold does not follow the scaling of Fth∼ √τp, when pulses are shorter than 10 ps. The impact ionization coefficient of SiO2 is measured up to ∼3×108 V/cm. The relative role of photoionization in breakdown for ultrashort pulses is discussed.

Method for controlling configuration of laser induced breakdown and ablation

Abstract: In one aspect the invention provides a method for laser induced breakdown of a material with a pulsed laser beam where the material is characterized by a relationship of fluence breakdown threshold (Fth) versus laser beam pulse width (T) that exhibits an abrupt, rapid, and distinct change or at least a clearly detectable and distinct change in slope at a predetermined laser pulse width value. The method comprises generating a beam of laser pulses in which each pulse has a pulse width equal to or less than the predetermined laser pulse width value. The beam is focused to a point at or beneath the surface of a material where laser induced breakdown is desired. The beam may be used in combination with a mask in the beam path. The beam or mask may be moved in the X, Y and Z directions to produce desired features. The technique can produce features smaller than the spot size and Rayleigh range due to enhanced damage threshold accuracy in the short pulse regime.

Reduction of multi-photon ionization in dielectrics due to collisions

Abstract: The collisional effect due to the multi-photon ionization process in dielectric material has been studied. We found that the breakdown threshold of fused silica is the same for both linearly and circularly polarized light at 55 fs and 100 fs, which we believe is an indication of the suppression of multi-photon ionization in solids. By numerically solving the time-dependent Schrodinger equation with scattering, for the first time, we have observed substantial reduction of the multi-photon ionization rate in dielectrics due to collisions.

Intense few-cycle laser fields: Frontiers of nonlinear optics

Abstract: The rise time of intense radiation determines the maximum field strength atoms can be exposed to before their polarizability dramatically drops due to the detachment of an outer electron. Recent progress in ultrafast optics has allowed the generation of ultraintense light pulses comprising merely a few field oscillation cycles. The arising intensity gradient allows electrons to survive in their bound atomic state up to external field strengths many times higher than the binding Coulomb field and gives rise to ionization rates comparable to the light frequency, resulting in a significant extension of the frontiers of nonlinear optics and (nonrelativistic) high-field physics. Implications include the generation of coherent harmonic radiation up to kiloelectronvolt photon energies and control of the atomic dipole moment on a subfemtosecond $(1{\mathrm{f}\mathrm{s}=10}^{\mathrm{\ensuremath{-}}15}\mathrm{}\mathrm{s})$ time scale. This review presents the landmarks of the 30-odd-year evolution of ultrashort-pulse laser physics and technology culminating in the generation of intense few-cycle light pulses and discusses the impact of these pulses on high-field physics. Particular emphasis is placed on high-order harmonic emission and single subfemtosecond extreme ultraviolet/x-ray pulse generation. These as well as other strong-field processes are governed directly by the electric-field evolution, and hence their full control requires access to the (absolute) phase of the light carrier. We shall discuss routes to its determination and control, which will, for the first time, allow access to the electromagnetic fields in light waves and control of high-field interactions with never-before-achieved precision.

Femtosecond laser micromachining in transparent materials

Abstract: Femtosecond laser micromachining can be used either to remove materials or to change a material's properties, and can be applied to both absorptive and transparent substances. Over the past decade, this technique has been used in a broad range of applications, from waveguide fabrication to cell ablation. This review describes the physical mechanisms and the main experimental parameters involved in the femtosecond laser micromachining of transparent materials, and important emerging applications of the technology. Interactions between laser and matter are fascinating and have found a wide range of applications. This article gives an overview of the fundamental physical mechanisms in the processing of transparent materials using ultrafast lasers, as well as important emerging applications of the technology.

Mechanisms of pulsed laser ablation of biological tissues.

Abstract: Author(s): Vogel, Alfred; Venugopalan, Vasan | Abstract: The mechanisms of pulsed laser ablation of biological tissues were studied. The transiently empty space created between the fiber tip and the tissue surface improved the optical transmission to the target and thus increased the ablation efficiency. It was found that the structure and morphology also affect the energy transport among tissue constituents.

Laser Material Processing

Abstract: In the laser treatment of a workpiece (9), e.g. for surface hardening, melting, alloying, cladding, welding or cutting, the adverse effect of reflectivity of the surface, when a pure, monochromatic laser (6) is used, is remedied by the simultaneous application of a relatively shorter wavelength beam (1). The two beams (1)(5) may be combined by a beam coupler (4) or may reach the workpiece (9) by separate optical paths (not shown). The shorter wavelength beam (1) improves the coupling efficiency of the higher- powered laser beam (5).