D. Juul Jensen

Bio: D. Juul Jensen is an academic researcher from Technical University of Denmark. The author has contributed to research in topics: Recrystallization (metallurgy) & Grain boundary. The author has an hindex of 42, co-authored 187 publications receiving 7154 citations. Previous affiliations of D. Juul Jensen include Colorado School of Mines.

Current issues in recrystallization: a review

Abstract: The current understanding of the fundamentals of recrystallization is summarized. This includes understanding the as-deformed state. Several aspects of recrystallization are described: nucleation and growth, the development of misorientation during deformation, continuous, dynamic, and geometric dynamic recrystallization, particle effects, and texture. This article is authored by the leading experts in these areas. The subjects are discussed individually and recommendations for further study are listed in the final section.

Three-dimensional maps of grain boundaries and the stress state of individual grains in polycrystals and powders

Abstract: A fast and non-destructive method for generating three-dimensional maps of the grain boundaries in undeformed polycrystals is presented. The method relies on tracking of micro-focused high-energy X-rays. It is verified by comparing an electron microscopy map of the orientations on the 2.5 × 2.5 mm surface of an aluminium polycrystal with tracking data produced at the 3DXRD microscope at the European Synchrotron Radiation Facility. The average difference in grain boundary position between the two techniques is 26 µm, comparable with the spatial resolution of the 3DXRD microscope. As another extension of the tracking concept, algorithms for determining the stress state of the individual grains are derived. As a case study, 3DXRD results are presented for the tensile deformation of a copper specimen. The strain tensor for one embedded grain is determined as a function of load. The accuracy on the strain is Δ∊ ≃ 10−4.

Watching the Growth of Bulk Grains During Recrystallization of Deformed Metals

Abstract: We observed the in situ growth of a grain during recrystallization in the bulk of a deformed sample. We used the three-dimensional x-ray diffraction microscope located at the European Synchrotron Radiation Facility in Grenoble, France. The results showed a very heterogeneous growth pattern, contradicting the classical assumption of smooth and spherical growth of new grains during recrystallization. This type of in situ bulk measurement opens up the possibility of obtaining experimental data on scientific topics that before could only be analyzed theoretically on the basis of the statistical characterization of microstructures. For recrystallization, the in situ method includes direct measurements of nucleation and boundary migration through a deformed matrix.

Friction Stir Welding and Processing

Abstract: Friction stir welding (FSW) is a relatively new solid-state joining process. This joining technique is energy efficient, environment friendly, and versatile. In particular, it can be used to join high-strength aerospace aluminum alloys and other metallic alloys that are hard to weld by conventional fusion welding. FSW is considered to be the most significant development in metal joining in a decade. Recently, friction stir processing (FSP) was developed for microstructural modification of metallic materials. In this review article, the current state of understanding and development of the FSW and FSP are addressed. Particular emphasis has been given to: (a) mechanisms responsible for the formation of welds and microstructural refinement, and (b) effects of FSW/FSP parameters on resultant microstructure and final mechanical properties. While the bulk of the information is related to aluminum alloys, important results are now available for other metals and alloys. At this stage, the technology diffusion has significantly outpaced the fundamental understanding of microstructural evolution and microstructure–property relationships.