scispace - formally typeset
Search or ask a question
Author

D. N. Arnepalli

Bio: D. N. Arnepalli is an academic researcher from Indian Institute of Technology Madras. The author has contributed to research in topics: Geosynthetic clay liner & Lime. The author has an hindex of 10, co-authored 35 publications receiving 348 citations. Previous affiliations of D. N. Arnepalli include Indian Institute of Technology Bombay & Indian Institutes of Technology.

Papers
More filters
Journal ArticleDOI
TL;DR: In this article, the specific surface area of fine-grained soils was determined by following different methodologies, and the results were evaluated critically with respect to liquid limit, cation exchange capacity, activity, and free swell index.
Abstract: Characteristics of fine-grained soils primarily depend on their specific-surface area and hence, reliable determination of this parameter is essential. In this context, researchers have employed quite sophisticated instruments (viz., a BET surface area analyzer, the mercury intrusion porosimetry, internal reflectance spectroscopy, X-Ray diffraction and gas pycnometer etc.) and methodologies (viz., sorption of Methylene Blue dye, Ethylene Glycol Monoethyl Ether and p-Nitrophenol) to determine specific-surface area of these soils. However, most of these methodologies are found to be quite tedious, cost and time intensive. Apart from this, the results obtained are contentious due to the inherent limitations associated with either the instruments employed or the basic assumptions made for computing the specific-surface area of the soil. Hence, it becomes mandatory to evaluate the efficiency of these methodologies for determining specific-surface area of fine-grained soils. With this in view, different types of soils were considered in this study and their specific-surface area was determined, by following different methodologies, and the results were evaluated critically. In addition, attempts were made to develop relationships between the basic properties of fine-grained soils (viz., liquid limit, cation-exchange capacity, activity, and free swell index) and the specific-surface area. These relationships will be of immense help to the practicing engineers and research fraternity.

84 citations

Journal ArticleDOI
TL;DR: In this article, the authors proposed a methodology to determine the required optimal lime dosage based on scientific criteria, by incorporating the influence of soil properties such as clay mineralogy, specific surface area, soil pH, cation exchange capacity, soil acidity, base saturation capacity, and buffer capacity.
Abstract: The stabilization of problematic fine-grained soils using lime as an admixture is a widely accepted practice, owing to its simplicity and cost-effectiveness. The optimal quantity of lime required for soil stabilization primarily depends upon the reactive nature of soil as well as the degree of improvement desired. The term ‘optimum lime content’ (OLC) defines the amount of lime required for satisfying the immediate/short-term soil–lime interaction, and still providing sufficient amount of free calcium and high residual pH necessary to initiate long-term pozzolanic reaction. Previous researchers proposed various empirical correlations and experimental methodologies for determining OLC, in terms of clay-size fraction and plasticity characteristics of virgin soil. However, the limiting lime content obtained using various conventional methods does not account for the most influencing inherent clay mineralogy of the soil; and hence, the results of these methodologies are observed to be quite disagreeing with each other. In view of these discrepancies, the present study attempts to validate the existing conventional methodologies for OLC determination at an elementary level, by comprehending the fundamental chemistry following soil–lime interactions. Based on the theoretical and experimental observations, it is quite evident that the accuracy of conventional tests is limited by combined influence of chemical and mineralogical properties of soils. Hence, it is proposed to develop a precise methodology to ascertain the required optimal lime dosage based on scientific criteria, by incorporating the influence of soil properties such as clay mineralogy, specific surface area, soil pH, cation exchange capacity, soil acidity, base saturation capacity, and buffer capacity.

62 citations

Journal ArticleDOI
TL;DR: In this paper, the effects of temperature, high pressure, and continuous leachate circulation on the aging of polyethylene geomembrane in composite liner systems are examined.
Abstract: Accelerated aging tests to evaluate the depletion of antioxidants from a high density polyethylene geomembrane are described. The effects of temperature, high pressure, and continuous leachate circulation on the aging of geomembranes in composite liner systems are examined. The antioxidant depletion rates (0.05, 0.19, and 0.41 month−1 at 55, 70, and 85°C , respectively) obtained for the simulated landfill liner at 250 kPa vertical pressure are consistently lower than that obtained from traditional leachate immersion tests on the same geomembrane (0.12, 0.39, and 1.1 month−1 at 55, 70, and 85°C ). This difference leads to a substantial increase in antioxidant depletion times at a typical landfill liner temperature ( 35°C ) with 40 years predicted based on the data from the landfill liner simulators tests, compared to 15 years predicted for the same geomembrane based on leachate immersion tests. In these tests, the crystallinity and tensile yield strain of the geomembrane increased in the early stages of ...

48 citations

Journal ArticleDOI
TL;DR: In this article, four geosynthetic clay liners serving as single liners were exhumed from below 0.7 m of silty sand on a 3:1 (horizontal:vertical) north-facing slope at the QUELTS site in Godfrey, Ontario.
Abstract: Four geosynthetic clay liners (GCLs) serving as single liners were exhumed from below 0.7 m of silty sand on a 3:1 (horizontal:vertical) north-facing slope at the QUELTS site in Godfrey, Ontario, a...

39 citations

Journal ArticleDOI
TL;DR: In this paper, a modified-falling head permeability apparatus under an accelerated gravity environment was used to assess the role of biopolymer amendment on the permeation behavior of sand-bentonite mixtures.
Abstract: Application of biopolymer-modified geomaterials in waste disposal practices is gaining wide acceptance due to their superior tensile characteristics and improved crack resistance. Permeability is an important design parameter which determines the suitability of a material as a liner for construction of engineered landfills. Given this, the permeability characteristics of sand-bentonite mixtures amended with biopolymers was studied using a modified-falling head permeability apparatus under an accelerated gravity environment. Both distilled water and synthetic leachate were utilized as permeant liquid to assess the role of biopolymer amendment on the permeation behavior of sand-bentonite mixtures. Experimental results indicate that addition of biopolymers causes aggregation of the clay platelets, which in turn enhances the permeation behavior of the biopolymer-modified sand-bentonite mixtures. These mixtures meet the regulatory requirement of the liner.

33 citations


Cited by
More filters
Journal ArticleDOI
TL;DR: While the book is a standard fixture in most chemical and physical laboratories, including those in medical centers, it is not as frequently seen in the laboratories of physician's offices (those either in solo or group practice), and I believe that the Handbook can be useful in those laboratories.
Abstract: There is a special reason for reviewing this book at this time: it is the 50th edition of a compendium that is known and used frequently in most chemical and physical laboratories in many parts of the world. Surely, a publication that has been published for 56 years, withstanding the vagaries of science in this century, must have had something to offer. There is another reason: while the book is a standard fixture in most chemical and physical laboratories, including those in medical centers, it is not as frequently seen in the laboratories of physician's offices (those either in solo or group practice). I believe that the Handbook can be useful in those laboratories. One of the reasons, among others, is that the various basic items of information it offers may be helpful in new tests, either physical or chemical, which are continuously being published. The basic information may relate

2,493 citations

Journal ArticleDOI
TL;DR: The toxic effects of heavy metal pollution and the mechanisms used by microbes and plants for environmental remediation are discussed and the importance of modern biotechnological techniques and approaches in improving the ability of microbial enzymes to effectively degrade heavy metals at a faster rate is emphasized.
Abstract: Environmental pollution from hazardous waste materials, organic pollutants and heavy metals, has adversely affected the natural ecosystem to the detriment of man. These pollutants arise from anthropogenic sources as well as natural disasters such as hurricanes and volcanic eruptions. Toxic metals could accumulate in agricultural soils and get into the food chain, thereby becoming a major threat to food security. Conventional and physical methods are expensive and not effective in areas with low metal toxicity. Bioremediation is therefore an eco-friendly and efficient method of reclaiming environments contaminated with heavy metals by making use of the inherent biological mechanisms of microorganisms and plants to eradicate hazardous contaminants. This review discusses the toxic effects of heavy metal pollution and the mechanisms used by microbes and plants for environmental remediation. It also emphasized the importance of modern biotechnological techniques and approaches in improving the ability of microbial enzymes to effectively degrade heavy metals at a faster rate, highlighting recent advances in microbial bioremediation and phytoremediation for the removal of heavy metals from the environment as well as future prospects and limitations. However, strict adherence to biosafety regulations must be followed in the use of biotechnological methods to ensure safety of the environment.

631 citations

Journal ArticleDOI
TL;DR: In this article, the authors examined and assessed predictive methods for the saturated hydraulic conductivity of soils and found that most predictive methods were calibrated using laboratory permeability tests performed on either disturbed or intact specimens for which the test conditions were either measured or supposed to be known.
Abstract: This paper examines and assesses predictive methods for the saturated hydraulic conductivity of soils. The soil definition is that of engineering. It is not that of soil science and agriculture, which corresponds to “top soil” in engineering. Most predictive methods were calibrated using laboratory permeability tests performed on either disturbed or intact specimens for which the test conditions were either measured or supposed to be known. The quality of predictive equations depends highly on the test quality. Without examining all the quality issues, the paper explains the 14 most important mistakes for tests in rigid-wall or flexible-wall permeameters. Then, it briefly presents 45 predictive methods, and in detail, those with some potential, such as the Kozeny-Carman equation. Afterwards, the data of hundreds of excellent quality tests, with none of the 14 mistakes, are used to assess the predictive methods with a potential. The relative performance of those methods is evaluated and presented in graphs. Three methods are found to work fairly well for non-plastic soils, two for plastic soils without fissures, and one for compacted plastic soils used for liners and covers. The paper discusses the effects of temperature and intrinsic anisotropy within the specimen, but not larger scale anisotropy within aquifers and aquitards.

270 citations

Journal ArticleDOI
RoweR. Kerry1
TL;DR: In this paper, the authors examined the factors that may affect short-term leakage through composite liners and showed that the leakage rate is only a very small fraction of that expected for either liners.
Abstract: The factors that may affect short-term leakage through composite liners are examined. It is shown that the leakage through composite liners is only a very small fraction of that expected for either...

197 citations

Journal ArticleDOI
TL;DR: Urea hydrolysis is the most applied in concrete repair mechanisms and is clearly evident that microbiological and molecular components are essential to improve the process and performance of bioconcrete.
Abstract: In this review, microbiological and molecular concepts of Microbially induced Calcium Carbonate Precipitation (MICP) and their role in bioconcrete are discussed. MICP is a widespread biochemical process in soils, caves, freshwater, marine sediments and hypersaline habitats. MICP is an outcome of metabolic interactions between diverse microbial communities with organic and/or inorganic compounds present in environment. Some of the major metabolic processes involved in MICP at different levels are urea hydrolysis, denitrification, dissimilatory sulfate reduction and photosynthesis. Currently, MICP directed by urea hydrolysis, denitrification and dissimilatory sulfate reduction has been reported to aid in development of bioconcrete and demonstrated improvement in mechanical and structural properties of concrete. Bioconcrete is a promising sustainable technology in reducing the negative environmental impacts due to CO2 emission from construction sector and as well as in terms of economic benefits by way of promoting self-healing process of the concrete structures. Among the metabolic processes mentioned above, urea hydrolysis is the most applied in concrete repair mechanisms. MICP by urea hydrolysis is induced by a series of reactions driven by urease (Ur) and carbonic anhydrase (CA). Catalytic activity of these two enzymes depends on diverse parameters, which are currently being studied under laboratory conditions to understand the biochemical mechanisms involved and their regulation in microorganisms. It is clearly evident that microbiological and molecular components are essential to improve the process and performance of bioconcrete.

170 citations