D.R. Redinger

Bio: D.R. Redinger is an academic researcher from University of California, Berkeley. The author has contributed to research in topics: Printed electronics & Electronics. The author has an hindex of 11, co-authored 16 publications receiving 1669 citations.

Plastic-Compatible Low Resistance Printable Gold Nanoparticle Conductors for Flexible Electronics

Abstract: Low resistance conductors are crucial for the development of ultra-low-cost electronic systems such as radio frequency identification tags. Low resistance conductors are required to enable the fabrication of high- Q inductors, capacitors, tuned circuits, and interconnects. The fabrication of these circuits by printing will enable a dramatic reduction in cost, through the elimination of lithography, vacuum processing, and the need for high-cost substrates. Solutions of organic-encapsulated gold nanoparticles many be printed and subsequently annealed to form low resistance conductor patterns. We describe a process to form the same, and discuss the optimization of the process to demonstrate plastic-compatible gold conductors for the first time. By optimizing both the size of the nanoparticle and the length of the alkanethiol encapsulant, it is possible to produce particles that anneal at low temperatures (,150°C) to form continuous gold films having low resistivity. We demonstrate the printing of these materials using

Progress Toward Development of All-Printed RFID Tags: Materials, Processes, and Devices

Abstract: Printed electronics provides a promising potential pathway toward the realization of ultralow-cost RFID tags for item-level tracking of consumer goods. Here, we report on our progress in developing materials, processes, and devices for the realization of ultralow-cost printed RFID tags. Using printed nanoparticle patterns that are subsequently sintered at plastic-compatible temperatures, low-resistance interconnects and passive components have been realized. Simultaneously, printed transistors with mobilities >10/sup -1/ cm/sup 2//V-s have been realized using novel pentacene and oligothiophene precursors for pMOS and ZnO nanoparticles for nMOS. AC performance of these devices is adequate for 135-kHz RFID, though significant work remains to be done to achieve 13.56-MHz operation.

An ink-jet-deposited passive component process for RFID

Abstract: An all ink-jet-deposited process capable of creating high-quality passive devices suitable for an RFID front-end is described. Gold nanocrystals are printed to create conductive lines with sheet resistance as low as 23 m/spl Omega/ per square. Optimal printing conditions are found for polyimide dielectric layers and films as thin as 340 nm are produced. These results are used to create spiral inductors, interconnect, and parallel plate capacitors.

Printed electronics for low-cost electronic systems: Technology status and application development

Abstract: In recent years, printing has received substantial interest as a technique for realizing low cost, large area electronic systems. Printing allows the use of purely additive processing, thus lowering process complexity and material usage. Coupled with the use of low-cost substrates such as plastic, metal foils, etc., it is expected that printed electronics will enable the realization of a wide range of easily deployable electronic systems, including displays, sensors, and RFID tags. We review our work on the development of technologies and applications for printed electronics. By combining synthetically derived inorganic nanoparticles and organic materials, we have realized a range of printable electronic ldquoinksrdquo, and used these to demonstrate printed passive components, multilayer interconnection, diodes, transistors, memories, batteries, and various types of gas and biosensors. By exploiting the ability of printing to cheaply allow for the integration of diverse functionalities and materials onto the same substrate, therefore, it is possible to realize printed systems that exploit the advantages of printing while working around the disadvantages of the same.

High-quality inkjet-printed multilevel interconnects and inductive components on plastic for ultra-low-cost RFID applications

Abstract: In recent years, there has been tremendous interest in all-printed electronics as a means of achieving ultra-low-cost electronic circuits with uses in displays and disposable electronics applications such as RFID tags. While there have been a few demonstrations of printed organic transistors to date, there has been little work on the associated passive component and interconnection technologies required to enable the development of all-printed RFID circuits. In particular, low-resistance conductors are crucial to achieve the high-Q inductors necessary for RFID. Here, we demonstrate inkjetted nanoparticle-Au conductors on plastic with sheet resistances as low as 0.03 ohms/square. We describe the optimization of the jetting parameters, and their impact on final film morphology and electrical properties. We also demonstrate a bridging technology based on an inkjetted polyimide interlevel dielectric. Using this process, we demonstrate multilevel interconnect and passive component structures including conductor patterns, crossover bridges, and tapped planar spiral inductors. Together, these represent an important step towards the realization of all-printed RFID.

Oxide Semiconductor Thin‐Film Transistors: A Review of Recent Advances

Abstract: Transparent electronics is today one of the most advanced topics for a wide range of device applications. The key components are wide bandgap semiconductors, where oxides of different origins play an important role, not only as passive component but also as active component, similar to what is observed in conventional semiconductors like silicon. Transparent electronics has gained special attention during the last few years and is today established as one of the most promising technologies for leading the next generation of flat panel display due to its excellent electronic performance. In this paper the recent progress in n- and p-type oxide based thin-film transistors (TFT) is reviewed, with special emphasis on solution-processed and p-type, and the major milestones already achieved with this emerging and very promising technology are summarizeed. After a short introduction where the main advantages of these semiconductors are presented, as well as the industry expectations, the beautiful history of TFTs is revisited, including the main landmarks in the last 80 years, finishing by referring to some papers that have played an important role in shaping transparent electronics. Then, an overview is presented of state of the art n-type TFTs processed by physical vapour deposition methods, and finally one of the most exciting, promising, and low cost but powerful technologies is discussed: solution-processed oxide TFTs. Moreover, a more detailed focus analysis will be given concerning p-type oxide TFTs, mainly centred on two of the most promising semiconductor candidates: copper oxide and tin oxide. The most recent data related to the production of complementary metal oxide semiconductor (CMOS) devices based on n- and p-type oxide TFT is also be presented. The last topic of this review is devoted to some emerging applications, finalizing with the main conclusions. Related work that originated at CENIMAT|I3N during the last six years is included in more detail, which has led to the fabrication of high performance n- and p-type oxide transistors as well as the fabrication of CMOS devices with and on paper.

Inkjet Printing—Process and Its Applications

Abstract: In this Progress Report we provide an update on recent developments in inkjet printing technology and its applications, which include organic thin-film transistors, light-emitting diodes, solar cells, conductive structures, memory devices, sensors, and biological/pharmaceutical tasks. Various classes of materials and device types are in turn examined and an opinion is offered about the nature of the progress that has been achieved.

The rise of plastic bioelectronics

Abstract: Plastic bioelectronics is a research field that takes advantage of the inherent properties of polymers and soft organic electronics for applications at the interface of biology and electronics. The resulting electronic materials and devices are soft, stretchable and mechanically conformable, which are important qualities for interacting with biological systems in both wearable and implantable devices. Work is currently aimed at improving these devices with a view to making the electronic-biological interface as seamless as possible.