Dangguo Gong

Bio: Dangguo Gong is an academic researcher from Nanyang Technological University. The author has contributed to research in topics: Titanate & Photocatalysis. The author has an hindex of 16, co-authored 24 publications receiving 1611 citations.

Transparent superhydrophobic/superhydrophilic TiO2-based coatings for self-cleaning and anti-fogging

Abstract: A stable titanate nanobelt (TNB) particle suspension was prepared by a hydrogen-bond-driven assembly of pre-hydrolysed fluoroalkylsilane (FAS) on its surface. A one-step electrophoretic deposition was applied to fabricate a transparent cross-aligned superhydrophobic TNB/FAS film on a conducting glass substrate. By controlling the deposition time, we have shown the transition between a “sticky” hydrophobic state (high contact angle with strong adhesion) and a “sliding” superhydrophobic state (high contact angle with weak adhesion). The optical transmittance can reach as high as 80% throughout most of the visible light region of the spectrum. These coatings have also displayed high chemical stability and self-cleaning ability. Upon heating the hydrophobic coatings at 500 °C, the TNB coating transforms into a porous TiO2(B) structure with superhydrophilic behavior and could be used for anti-fogging applications. With this TiO2-based system, we have demonstrated three different wetting states: superhydrophobicity with weak adhesion, high hydrophobicity with strong adhesion, and superhydrophilicity with immediate water spreading. Moreover, this work has also demonstrated superhydrophobic TNB/FAS films with high chemical stability and good self-cleaning performance and superhydrophilic pore-like TiO2(B) films with rapid water spreading and excellent anti-fogging ability.

Titanate and titania nanostructured materials for environmental and energy applications: a review

Abstract: Nanosized TiO2-based materials with unique structural and functional properties have already led to breakthroughs in various applications including photocatalysis, adsorption, lithium-ion batteries, etc. In this review, we present the state-of-the-art development of fabrication strategies of titanate/titania nanostructures and their corresponding environmental and energy applications. First, the structural features of titanate and titania and their correlation are explained in great detail. After which, recent research efforts on the development of multi-dimensional titanate materials are summarized. Following that, the applications of titanate/titania nanomaterials in the fields of adsorbents, photocatalysis, lithium-ion batteries, photovoltaics, electrochromic devices, self-cleaning and oil–water separation are reviewed. Finally, the future perspectives for the nanostructured titanate and titania are discussed. Continuous development in this area is essential to endow TiO2-based materials with advanced functionality and improved performance for practical applications.

Fabrication of uniform Ag/TiO2 nanotube array structures with enhanced photoelectrochemical performance

Abstract: In the current work, pulse current deposition has been used to prepare evenly distributed and uniformly sized Ag nanoparticles on a TiO2 nanotube array photoelectrode. The Ag particle size and loading were controlled by the pulse deposition time. The Ag/TiO2 nanotube arrays were characterized by SEM, TEM, XRD, XPS and UV-vis diffuse reflection absorption. The resulting electrode contained intimately coupled, three-dimensional Ag/TiO2 structures with greatly improved photocurrent generation and charge transfer compared to a two-dimensional random Ag particle layer deposited directly on top of the nanotube array by the regular photoinduction method. A model mechanism is proposed to illustrate the uniform Ag nanoparticle deposition via the new deposition technique developed in the current work that promotes the uniform distribution of the Ag particles whilst minimizing their deposition at tube entrances, thus effectively preventing the pores from becoming clogged.

Hierarchical TiO2 nanoflakes and nanoparticles hybrid structure for improved photocatalytic activity

Abstract: Three-dimensional TiO2 microspheres with different hierarchical nanostructures were synthesized by the synergistic strategies of ultrafast electrochemical spark discharge spallation process followed by thermal treatment. The morphology, crystal structure, surface area, and photocatalytic activity of the hierarchical nanostructures were characterized by scanning electron microscopy, transmission electron microscopy, X-ray diffraction, surface area analysis, and UV–vis spectroscopy respectively. The nanostructure of hierarchical microspheres undergoes three evolution steps, which includes the change from nanosheets into hybrid nanoflakes/nanoparticles and finally to nanoparticles as calcination temperature increases, in line with the predicable trend of increase in crystallinity and decrease in specific surface area. Compared to other forms of calcined TiO2 samples (nanosheets and nanoparticles), the hybrid TiO2 nanoflake/nanoparticle hierarchical porous structure exhibits a higher photocatalytic activity f...

I and i

Abstract: There is, I think, something ethereal about i —the square root of minus one. I remember first hearing about it at school. It seemed an odd beast at that time—an intruder hovering on the edge of reality. Usually familiarity dulls this sense of the bizarre, but in the case of i it was the reverse: over the years the sense of its surreal nature intensified. It seemed that it was impossible to write mathematics that described the real world in …

Plasmon-induced hot-electron generation at nanoparticle/metal-oxide interfaces for photovoltaic and photocatalytic devices

Abstract: Optical generation of hot electrons in metallic structures and its potential as an alternative to conventional electron–hole separation in semiconductor devices are reviewed. The possibilities for realizing high conversion efficiencies with low fabrication costs are discussed along with challenges in terms of the materials, architectures and fabrication methods

Nanozymes: Classification, Catalytic Mechanisms, Activity Regulation, and Applications

Abstract: Because of the high catalytic activities and substrate specificity, natural enzymes have been widely used in industrial, medical, and biological fields, etc. Although promising, they often suffer from intrinsic shortcomings such as high cost, low operational stability, and difficulties of recycling. To overcome these shortcomings, researchers have been devoted to the exploration of artificial enzyme mimics for a long time. Since the discovery of ferromagnetic nanoparticles with intrinsic horseradish peroxidase-like activity in 2007, a large amount of studies on nanozymes have been constantly emerging in the next decade. Nanozymes are one kind of nanomaterials with enzymatic catalytic properties. Compared with natural enzymes, nanozymes have the advantages such as low cost, high stability and durability, which have been widely used in industrial, medical, and biological fields. A thorough understanding of the possible catalytic mechanisms will contribute to the development of novel and high-efficient nanozymes, and the rational regulations of the activities of nanozymes are of great significance. In this review, we systematically introduce the classification, catalytic mechanism, activity regulation as well as recent research progress of nanozymes in the field of biosensing, environmental protection, and disease treatments, etc. in the past years. We also propose the current challenges of nanozymes as well as their future research focus. We anticipate this review may be of significance for the field to understand the properties of nanozymes and the development of novel nanomaterials with enzyme mimicking activities.

Nanoscale metal oxide-based heterojunctions for gas sensing: A review

Abstract: Metal oxide-based resistive-type gas sensors are solid-state devices which are widely used in a number of applications from health and safety to energy efficiency and emission control. Nanomaterials such as nanowires, nanorods, and nanoparticles have dominated the research focus in this field due to their large number of surface sites facilitating surface reactions. Previous studies have shown that incorporating two or more metal oxides to form a heterojunction interface can have drastic effects on gas sensor performance, especially the selectivity. Recently, these effects have been amplified by designing heterojunctions on the nano-scale. These designs have evolved from mixed commercial powders and bi-layer films to finely-tuned core–shell and hierarchical brush-like nanocomposites. This review details the various morphological classes currently available for nanostructured metal-oxide based heterojunctions and then presents the dominant electronic and chemical mechanisms that influence the performance of these materials as resistive-type gas sensors. Mechanisms explored include p–n and n–n potential barrier manipulation, n–p–n response type inversions, spill-over effects, synergistic catalytic behavior, and microstructure enhancement. Tables are presented summarizing these works specifically for SnO2, ZnO, TiO2, In2O3, Fe2O3, MoO3, Co3O4, and CdO-based nanocomposites. Recent developments are highlighted and likely future trends are explored.

Surface modification of TiO2 photocatalyst for environmental applications

Abstract: This paper reviews recent studies on the semiconductor photocatalysis based on surface-modified TiO2 of which application is mainly focused on environmental remediation. TiO2 photocatalysis that is based on the photoinduced interfacial charge transfer has been extensively studied over the past four decades. A great number of modification methods of semiconductor photocatalysts have been developed and investigated to accelerate the photoconversion, to enable the absorption of visible light, or to alter the reaction mechanism to control the products and intermediates. In this regard, various modification methods of TiO2 are classified according to the kind of surface modifiers (metal-loading, impurity doping, inorganic adsorbates, polymer coating, dye-sensitization, charge transfer complexation) and their effects on photocatalytic reaction mechanism and kinetics are discussed in detail. Modifying TiO2 in various ways not only changes the mechanism and kinetics under UV irradiation but also introduces visible light activity that is absent with pure TiO2. Each modification method influences the photocatalytic activity and mechanism in a way different from others and the observed modification effects are often different depending on the test substrates and conditions even for the same modification method. Better understanding of the modification effects on TiO2 photocatalysis is necessary to obtain reliable results, to assess the photoconversion efficiency more quantitatively, and to further improve the modification methods.