Daniel D. Stancil

Bio: Daniel D. Stancil is an academic researcher from North Carolina State University. The author has contributed to research in topics: Wave propagation & HVAC. The author has an hindex of 38, co-authored 259 publications receiving 6739 citations. Previous affiliations of Daniel D. Stancil include Los Alamos National Laboratory & University of Pittsburgh.

Magnetic Resonant Coupling As a Potential Means for Wireless Power Transfer to Multiple Small Receivers

Abstract: Wireless power transfer via magnetic resonant coupling is experimentally demonstrated in a system with a large source coil and either one or two small receivers. Resonance between source and load coils is achieved with lumped capacitors terminating the coils. A circuit model is developed to describe the system with a single receiver, and extended to describe the system with two receivers. With parameter values chosen to obtain good fits, the circuit models yield transfer frequency responses that are in good agreement with experimental measurements over a range of frequencies that span the resonance. Resonant frequency splitting is observed experimentally and described theoretically for the multiple receiver system. In the single receiver system at resonance, more than 50% of the power that is supplied by the actual source is delivered to the load. In a multiple receiver system, a means for tracking frequency shifts and continuously retuning the lumped capacitances that terminate each receiver coil so as to maximize efficiency is a key issue for future work.

Mobile Vehicle-to-Vehicle Narrow-Band Channel Measurement and Characterization of the 5.9 GHz Dedicated Short Range Communication (DSRC) Frequency Band

Abstract: This study presents narrow-band measurements of the mobile vehicle-to-vehicle propagation channel at 5.9 GHz, under realistic suburban driving conditions in Pittsburgh, Pennsylvania. Our system includes differential Global Positioning System (DGPS) receivers, thereby enabling dynamic measurements of how large-scale path loss, Doppler spectrum, and coherence time depend on vehicle location and separation. A Nakagami distribution is used for describing the fading statistics. The speed-separation diagram is introduced as a new tool for analyzing and understanding the vehicle-to-vehicle propagation environment. We show that this diagram can be used to model and predict channel Doppler spread and coherence time using vehicle speed and separation.

Efficient simulation of Ricean fading within a packet simulator

Abstract: Packet level network protocol simulators use simple channel models for computational efficiency. A typical method for doing this is to compute a packet error probability assuming a certain fading distribution without taking into account time-correlation. This paper introduces work that has been done to model the effect of small-scale fading (Rayleigh and Ricean) within the ns network simulator. It allows for the faithful simulation of a complete fading envelope. The fading models have the appropriate statistics and also time correlational properties obtained from the Doppler spectrum. An efficient implementation based on a simple table lookup is described.

Spin Waves: Theory and Applications

Abstract: to Magnetism.- Quantum Theory of Spin Waves.- Magnetic Susceptibilities.- Electromagnetic Waves in Anisotropic-Dispersive Media.- Magnetostatic Modes.- Propagation Characteristics and Excitation of Dipolar Spin Waves.- Variational Formulation for Magnetostatic Modes.- Optical-Spin Wave Interactions.- Nonlinear Interactions.- Novel Applications.

Toward understanding characteristics of dedicated short range communications (DSRC) from a perspective of vehicular network engineers

Abstract: IEEE 80211p-based Dedicated Short Range Communications (DSRC) is considered a promising wireless technology for enhancing transportation safety and improving highway efficiency Here, using a large set of empirical measurement data taken in a rich variety of realistic driving environments, we attempt to characterize communication properties of DSRC as well as to analyze the causes of communication loss Specifically, from a perspective of vehicular network engineers, the fundamental characteristic of DSRC communications is Packet Delivery Ratio (PDR) We investigate the impact of both uncontrollable environmental factors and controllable radio parameters on DSRC characteristics Moreover, we also examine temporal correlation, spatial correlation and symmetric correlation of DSRC characteristics under realistic vehicular environments

Scaling Up MIMO: Opportunities and Challenges with Very Large Arrays

Abstract: Multiple-input multiple-output (MIMO) technology is maturing and is being incorporated into emerging wireless broadband standards like long-term evolution (LTE) [1]. For example, the LTE standard allows for up to eight antenna ports at the base station. Basically, the more antennas the transmitter/receiver is equipped with, and the more degrees of freedom that the propagation channel can provide, the better the performance in terms of data rate or link reliability. More precisely, on a quasi static channel where a code word spans across only one time and frequency coherence interval, the reliability of a point-to-point MIMO link scales according to Prob(link outage) ` SNR-ntnr where nt and nr are the numbers of transmit and receive antennas, respectively, and signal-to-noise ratio is denoted by SNR. On a channel that varies rapidly as a function of time and frequency, and where circumstances permit coding across many channel coherence intervals, the achievable rate scales as min(nt, nr) log(1 + SNR). The gains in multiuser systems are even more impressive, because such systems offer the possibility to transmit simultaneously to several users and the flexibility to select what users to schedule for reception at any given point in time [2].

A high-throughput path metric for multi-hop wireless routing

Abstract: This paper presents the expected transmission count metric (ETX), which finds high-throughput paths on multi-hop wireless networks. ETX minimizes the expected total number of packet transmissions (including retransmissions) required to successfully deliver a packet to the ultimate destination. The ETX metric incorporates the effects of link loss ratios, asymmetry in the loss ratios between the two directions of each link, and interference among the successive links of a path. In contrast, the minimum hop-count metric chooses arbitrarily among the different paths of the same minimum length, regardless of the often large differences in throughput among those paths, and ignoring the possibility that a longer path might offer higher throughput.This paper describes the design and implementation of ETX as a metric for the DSDV and DSR routing protocols, as well as modifications to DSDV and DSR which allow them to use ETX. Measurements taken from a 29-node 802.11b test-bed demonstrate the poor performance of minimum hop-count, illustrate the causes of that poor performance, and confirm that ETX improves performance. For long paths the throughput improvement is often a factor of two or more, suggesting that ETX will become more useful as networks grow larger and paths become longer.

Scaling up MIMO: Opportunities and Challenges with Very Large Arrays

Abstract: This paper surveys recent advances in the area of very large MIMO systems. With very large MIMO, we think of systems that use antenna arrays with an order of magnitude more elements than in systems being built today, say a hundred antennas or more. Very large MIMO entails an unprecedented number of antennas simultaneously serving a much smaller number of terminals. The disparity in number emerges as a desirable operating condition and a practical one as well. The number of terminals that can be simultaneously served is limited, not by the number of antennas, but rather by our inability to acquire channel-state information for an unlimited number of terminals. Larger numbers of terminals can always be accommodated by combining very large MIMO technology with conventional time- and frequency-division multiplexing via OFDM. Very large MIMO arrays is a new research field both in communication theory, propagation, and electronics and represents a paradigm shift in the way of thinking both with regards to theory, systems and implementation. The ultimate vision of very large MIMO systems is that the antenna array would consist of small active antenna units, plugged into an (optical) fieldbus.

Ferromagnetic materials

Abstract: In this chapter, we will restrict our attention to the ferrites and a few other closely related materials. The great interest in ferrites stems from their unique combination of a spontaneous magnetization and a high electrical resistivity. The observed magnetization results from the difference in the magnetizations of two non-equivalent sub-lattices of the magnetic ions in the crystal structure. Materials of this type should strictly be designated as “ferrimagnetic” and in some respects are more closely related to anti-ferromagnetic substances than they are to ferromagnetics in which the magnetization results from the parallel alignment of all the magnetic moments present. We shall not adhere to this special nomenclature except to emphasize effects, which are due to the existence of the sub-lattices.

Dedicated Short-Range Communications (DSRC) Standards in the United States

Abstract: Wireless vehicular communication has the potential to enable a host of new applications, the most important of which are a class of safety applications that can prevent collisions and save thousands of lives. The automotive industry is working to develop the dedicated short-range communication (DSRC) technology, for use in vehicle-to-vehicle and vehicle-to-roadside communication. The effectiveness of this technology is highly dependent on cooperative standards for interoperability. This paper explains the content and status of the DSRC standards being developed for deployment in the United States. Included in the discussion are the IEEE 802.11p amendment for wireless access in vehicular environments (WAVE), the IEEE 1609.2, 1609.3, and 1609.4 standards for Security, Network Services and Multi-Channel Operation, the SAE J2735 Message Set Dictionary, and the emerging SAE J2945.1 Communication Minimum Performance Requirements standard. The paper shows how these standards fit together to provide a comprehensive solution for DSRC. Most of the key standards are either recently published or expected to be completed in the coming year. A reader will gain a thorough understanding of DSRC technology for vehicular communication, including insights into why specific technical solutions are being adopted, and key challenges remaining for successful DSRC deployment. The U.S. Department of Transportation is planning to decide in 2013 whether to require DSRC equipment in new vehicles.