Daniel Edelhoff

Bio: Daniel Edelhoff is an academic researcher from Ludwig Maximilian University of Munich. The author has contributed to research in topics: Medicine & Dental prosthesis. The author has an hindex of 39, co-authored 153 publications receiving 6490 citations. Previous affiliations of Daniel Edelhoff include RWTH Aachen University.

Digital dentistry: an overview of recent developments for CAD/CAM generated restorations

Abstract: As in many other industries, production stages are increasingly becoming automated in dental technology. As the price of dental laboratory work has become a major factor in treatment planning and therapy, automation could enable more competitive production in high-wage areas like Western Europe and the USA. Advances in computer technology now enable cost-effective production of individual pieces. Dental restorations produced with computer assistance have become more common in recent years. Most dental companies have access to CAD/CAM procedures, either in the dental practice, the dental laboratory or in the form of production centres. The many benefits associated with CAD/CAM generated dental restorations include: the access to new, almost defect-free, industrially prefabricated and controlled materials; an increase in quality and reproducibility and also data storage commensurate with a standardised chain of production; an improvement in precision and planning, as well as an increase in efficiency. As a result of continual developments in computer hardware and software, new methods of production and new treatment concepts are to be expected, which will enable an additional reduction in costs. Dentists, who will be confronted with these techniques in the future, require certain basic knowledge if they are to benefit from these new procedures. This article gives an overview of CAD/CAM-technologies and systems available for dentistry today.

Tooth structure removal associated with various preparation designs for anterior teeth

Abstract: Statement of Problem. The conservation of sound tooth structure helps preserve tooth vitality and reduce postoperative sensitivity. Innovative preparation designs, like those for porcelain laminate veneers, are much less invasive than conventional complete-coverage crown preparations. However, no study has quantified the amount of tooth structure removed during these preparations. Purpose. The purpose of this study was to quantify and compare the amount of tooth structure removed when various innovative and conventional tooth preparation designs were completed on different teeth. Material and Methods. A new comprehensive tooth preparation design classification system was introduced. Typodont resin teeth representing the maxillary left central incisor, maxillary left canine, and mandibular left central incisor were prepared with the following designs: partial (V1), traditional (V2), extended (V3), and complete (V4) porcelain laminate veneer preparations; resin-bonded retainer preparation with grooves (A1) and with wing/grooves (A2); all-ceramic crown preparation with 0.8 mm axial reduction and tapering chamfer finish line (F1), all-ceramic crown preparation with 1.0 mm axial reduction and rounded shoulder finish line (F2), and metal-ceramic crown with 1.4 mm axial reduction and facial shoulder finish line (F3). After tooth preparations (10 per group), the crown was separated from the root at the CEJ. The removed coronal tooth structure was measured with gravimetric analysis. Means and standard deviations for tooth structure removal with different preparation designs were calculated and analyzed with analysis of variance at a significance level of P Results. Significant differences in the amount of tooth structure removal were noted between preparation designs. Ceramic veneers and resin-bonded prosthesis retainers were the least invasive preparation designs, removing approximately 3% to 30% of the coronal tooth structure by weight. Approximately 63% to 72% of the coronal tooth structure was removed when teeth were prepared for all-ceramic and metal-ceramic crowns. For a single crown restoration, the tooth structure removal required for an F3 preparation (metal-ceramic crown) was 4.3 times greater than for a V2 preparation (porcelain laminate veneer, facial surface only) and 2.4 times greater than for a V4 preparation (more extensive porcelain laminate veneer). Conclusion. Within the limitations of this study, tooth preparations for porcelain laminate veneers and resin-bonded prostheses required approximately one-quarter to one-half the amount of tooth reduction of conventional complete-coverage crowns. (J Prosthet Dent 2002;87:503-9.)

Maxillary sinus augmentation using xenogenic bone substitute material Bio-Oss® in combination with venous blood

Abstract: The aim of the present study was to evaluate bone formation following maxillary sinus augmentation using bovine bone substitute material Bio-Oss in combination with venous blood by means of histologic and histomorphometric examination of human biopsies. This involved a total of 15 sinus floor elevation procedures being carried out on 11 patients (average age of 49.6 years) according to the technique described by Tatum (1986). The subantral sinus cavity was augmented using bovine apatite combined with venous blood. After an average healing phase of 6.8 months, trephine burrs were used to take 22 bone biopsies from the augmented sinus region. Then 38 Branemark implants were inserted in both the osteotomies resulting from bone sampling and in regular sites in the augmented posterior maxilla. Histomorphometric analysis of ground sections from the bone biopsies prepared according to the standard method of Donath & Breuner (1982) produced an average percentage of newly-formed bone of 14.7% (+/- 5.0%) and a proportion of residual xenogenic bone substitute material of 29.7% (+/- 7.8%). Some 29.1% (+/- 8.1%) of the surface of the Bio-Oss granulate was in direct contact with newly-formed bone. Histologically, newly-developed bone became evident, partly invaginating the particles of apatite and forming bridges in the form of trabeculae between the individual Bio-Oss particles. Despite the absence of osteoclastic activity, the inward growth of bone indicates slow resorption of the xenogenic bone graft material. When the implants were uncovered, after an average healing phase of 6 months, 4 of the 38 implants had become loose. Of these 4 implants, 1 had to be subsequently explanted, while the others remained as "sleeping implants" and were not included in the implants superstructure. Thus, the resulting clinical survival rate, prior to prosthetic loading, was 89.5%.

Accuracy of digital models obtained by direct and indirect data capturing

Abstract: Objectives With direct and indirect digitalisation, two access points to CAD/CAM-generated restorations are available. The aim of this study was to compare the accuracy of the single steps of both approaches by comparing construction datasets using a new methodology. Material and method Twelve test datasets were generated in vitro (1) with the Lava Chairside Oral Scanner (COS) (2) by digitizing polyether impressions (IMP) and (3) by scanning the referring gypsum cast by the Lava Scan ST laboratory scanner (ST) at a time. Using an inspection software, these datasets were superimposed by a best fit algorithm with the reference dataset (REF), gained from industrial computed tomography, and divergences were analysed. Results On the basis of average positive and negative deviations between test- and REF datasets, it could be shown that direct digitalisation accomplished the most accurate results (COS, 17 μm/-13 μm; SD ± 19 μm), followed by digitized polyether impression (IMP, 23 μm/-22 μm; SD ± 31 μm) and indirect digitalisation (ST, 36 μm/-35 μm; SD ± 52 μm). The mean absolute values of Euclidean distances showed the least values for COS (15 μm; SD ± 6 μm), followed by IMP (23 μm; SD ± 9 μm) and ST (36 μm; SD ± 7 μm). The mean negative and mean absolute values of all groups were significantly different. Comparing the mean positive values of the groups, IMP and COS (p = 0.082) showed no significant difference, whereas ST and COS, and ST and IMP exhibited statistically significant differences. Conclusions Within the limitations of this in vitro study, the direct digitalisation with Lava C.O.S. showed statistically significantly higher accuracy compared to the conventional procedure of impression taking and indirect digitalisation. Clinical relevance Within the limitations of this study, the method of direct digitalisation seems to have the potential to improve the accuracy of impressions for four-unit FDPs.

Pattern Recognition and Machine Learning

Abstract: Probability Distributions.- Linear Models for Regression.- Linear Models for Classification.- Neural Networks.- Kernel Methods.- Sparse Kernel Machines.- Graphical Models.- Mixture Models and EM.- Approximate Inference.- Sampling Methods.- Continuous Latent Variables.- Sequential Data.- Combining Models.

Resin-ceramic bonding: a review of the literature.

Abstract: Current ceramic materials offer preferred optical properties for highly esthetic restorations. The inherent brittleness of some ceramic materials, specific treatment modalities, and certain clinical situations require resin bonding of the completed ceramic restoration to the supporting tooth structures for long-term clinical success. This article presents a literature review on the resin bond to dental ceramics. A PubMed database search was conducted for in vitro studies pertaining to the resin bond to ceramic materials. The search was limited to peer-reviewed articles published in English between 1966 and 2001. Although the resin bond to silica-based ceramics is well researched and documented, few in vitro studies on the resin bond to high-strength ceramic materials were identified. Available data suggest that resin bonding to these materials is less predictable and requires substantially different bonding methods than to silica-based ceramics. Further in vitro studies, as well as controlled clinical trials, are needed.

Current ceramic materials and systems with clinical recommendations: A systematic review

Abstract: Statement of problem Developments in ceramic core materials such as lithium disilicate, aluminum oxide, and zirconium oxide have allowed more widespread application of all-ceramic restorations over the past 10 years. With a plethora of ceramic materials and systems currently available for use, an overview of the scientific literature on the efficacy of this treatment therapy is indicated. Purpose This article reviews the current literature covering all-ceramic materials and systems, with respect to survival, material properties, marginal and internal fit, cementation and bonding, and color and esthetics, and provides clinical recommendations for their use. Material and methods A comprehensive review of the literature was completed seeking evidence for the treatment of teeth with all-ceramic restorations. A search of English language peer-reviewed literature was undertaken using MEDLINE and PubMed with a focus on evidence-based research articles published between 1996 and 2006. A hand search of relevant dental journals was also completed. Randomized controlled trials, nonrandomized controlled studies, longitudinal experimental clinical studies, longitudinal prospective studies, and longitudinal retrospective studies were reviewed. The last search was conducted on June 12, 2007. Data supporting the clinical application of all-ceramic materials and systems was sought. Results The literature demonstrates that multiple all-ceramic materials and systems are currently available for clinical use, and there is not a single universal material or system for all clinical situations. The successful application is dependent upon the clinician to match the materials, manufacturing techniques, and cementation or bonding procedures, with the individual clinical situation. Conclusions Within the scope of this systematic review, there is no evidence to support the universal application of a single ceramic material and system for all clinical situations. Additional longitudinal clinical studies are required to advance the development of ceramic materials and systems.

A systematic review of the success of sinus floor elevation and survival of implants inserted in combination with sinus floor elevation

Abstract: Objectives: The objectives of this systematic review were to assess the survival rate of implants placed in sites with transalveolar sinus floor elevation. Material and Methods: An electronic search was conducted to identify prospective and retrospective cohort studies on transalveolar sinus floor elevation, with a mean follow-up time of at least 1 year after functional loading. Failure and complication rates were analyzed using random-effects Poisson regression models to obtain summary estimates/ year proportions. Results: The search provided 849 titles. Full-text analysis was performed for 176 articles, resulting in 19 studies that met the inclusion criteria. Meta-analysis of these studies indicated an estimated annual failure rate of 2.48% (95% confidence interval (95% CI): 1.37‐4.49%) translating to an estimated survival rate of 92.8% (95% CI): 87.4‐96.0%) for implants placed in transalveolarly augmented sinuses, after 3 years in function. Furthermore, subject-based analysis revealed an estimated annual failure of 3.71% (95% CI: 1.21‐11.38%), translating to 10.5% (95% CI: 3.6‐28.9%) of the subjects experiencing implant loss over 3 years. Conclusion: Survival rates of implants placed in transalveolar sinus floor augmentation sites are comparable to those in non-augmented sites. This technique is predictable with a low incidence of complications during and post-operatively.