Daniela Paneva

Bio: Daniela Paneva is an academic researcher from Bulgarian Academy of Sciences. The author has contributed to research in topics: Catalysis & Iron oxide. The author has an hindex of 22, co-authored 87 publications receiving 1593 citations.

Mechano-Synthesis, Characterization, and Magnetic Properties of Nanoparticles of Cobalt Ferrite, CoFe2O4

Abstract: Cobalt ferrite, CoFe2O4, nanoparticles have been obtained from pre-prepared layered double hydroxide carbonate, LDH-CO3, by mechanical milling. X-ray powder diffraction shows the only product of the milling for 5 h of the LDH-CO3 is cobalt ferrite nanoparticles. Longer-term milling induces particle growth characterized by sharpening of the Bragg peaks and an increase of the blocking temperature, while prolonged milling results in the formation of some cobalt metal. Mossbauer spectra and temperature dependence of the magnetization of the 5-h milled sample suggest that it consists of nanoparticles of size less than 10 nm with blocking temperature of 200 K, in good agreement with microscopy showing an average size of 6 nm. The magnetic properties exhibit a strong dependence on the particle size as a result of an unusual cation distribution and of surface effect. The saturation magnetization at 5 K and the squareness of the hysteresis loops increase with the average particle size. The difference between zero-...

Mechanochemically synthesized nano-dimensional iron–cobalt spinel oxides as catalysts for methanol decomposition

Abstract: Iron–cobalt spinel oxide nanoparticles with different Fe/Co ratios have been prepared by the combination of chemical precipitation with simultaneous ultrasonic treatment and subsequent mechanical milling. For comparison, their analogues obtained by thermal synthesis were also studied. Phase composition and structural properties of iron–cobalt oxides are investigated by X-ray diffraction and Moessbauer spectroscopy. Their catalytic behavior in methanol decomposition to CO and methane is tested. A well-defined effect of the preparation method and Fe/Co ratio on the reduction and catalytic properties of iron–cobalt samples is established.

Nanosized iron and iron–cobalt spinel oxides as catalysts for methanol decomposition

Abstract: Nanosized iron and mixed iron–cobalt oxides supported on activated carbon materials and their bulk analogues prepared by thermal synthesis are studied by X-rays diffraction, Mossbauer spectroscopy, magnetic measurements and temperature programmed reduction. Their catalytic behavior in methanol decomposition to H 2 , CO and methane is tested. Phase transformations in the metal oxides affected by the reaction medium are also investigated. Changes in the reaction mechanism of the methanol decomposition after the metal oxides deposition on the support as compared to the bulk phases are discussed.

Cu and Cu-Based Nanoparticles: Synthesis and Applications in Catalysis.

Abstract: The applications of copper (Cu) and Cu-based nanoparticles, which are based on the earth-abundant and inexpensive copper metal, have generated a great deal of interest in recent years, especially in the field of catalysis. The possible modification of the chemical and physical properties of these nanoparticles using different synthetic strategies and conditions and/or via postsynthetic chemical treatments has been largely responsible for the rapid growth of interest in these nanomaterials and their applications in catalysis. In addition, the design and development of novel support and/or multimetallic systems (e.g., alloys, etc.) has also made significant contributions to the field. In this comprehensive review, we report different synthetic approaches to Cu and Cu-based nanoparticles (metallic copper, copper oxides, and hybrid copper nanostructures) and copper nanoparticles immobilized into or supported on various support materials (SiO2, magnetic support materials, etc.), along with their applications i...

Fundamentals and Catalytic Applications of CeO2-Based Materials

Abstract: Cerium dioxide (CeO2, ceria) is becoming an ubiquitous constituent in catalytic systems for a variety of applications. 2016 sees the 40th anniversary since ceria was first employed by Ford Motor Company as an oxygen storage component in car converters, to become in the years since its inception an irreplaceable component in three-way catalysts (TWCs). Apart from this well-established use, ceria is looming as a catalyst component for a wide range of catalytic applications. For some of these, such as fuel cells, CeO2-based materials have almost reached the market stage, while for some other catalytic reactions, such as reforming processes, photocatalysis, water-gas shift reaction, thermochemical water splitting, and organic reactions, ceria is emerging as a unique material, holding great promise for future market breakthroughs. While much knowledge about the fundamental characteristics of CeO2-based materials has already been acquired, new characterization techniques and powerful theoretical methods are dee...

Cobalt-catalyzed sulfate radical-based advanced oxidation: A review on heterogeneous catalysts and applications

Abstract: Recently sulfate radical-based advanced oxidation processes (SR-AOPs) attract increasing attention due to their capability and adaptability in decontamination. The couple of cobalt and peroxymonosulfate (PMS) is an efficient way to produce reactive sulfate radicals. This article reviews the state-of-the-art progress on various heterogeneous cobalt-based catalysts for PMS activation, including cobalt oxides, cobalt-ferrite and supported cobalt by diverse substrates. We summarize the intrinsic properties of these catalysts and their fundamental behaviors in PMS activation, as well as synthetic approaches. In addition, influencing factors and synergistic techniques of Co/PMS systems in organic degradation and possible environmental applications are also discussed. Finally, we propose perspectives on challenges related to cobalt-based catalysts, heterogeneous Co/PMS systems and their potential applications in practical environmental cleanup.

Recent Advances in the Catalytic Oxidation of Volatile Organic Compounds: A Review Based on Pollutant Sorts and Sources.

Abstract: It is well known that urbanization and industrialization have resulted in the rapidly increasing emissions of volatile organic compounds (VOCs), which are a major contributor to the formation of secondary pollutants (e.g., tropospheric ozone, PAN (peroxyacetyl nitrate), and secondary organic aerosols) and photochemical smog. The emission of these pollutants has led to a large decline in air quality in numerous regions around the world, which has ultimately led to concerns regarding their impact on human health and general well-being. Catalytic oxidation is regarded as one of the most promising strategies for VOC removal from industrial waste streams. This Review systematically documents the progresses and developments made in the understanding and design of heterogeneous catalysts for VOC oxidation over the past two decades. It addresses in detail how catalytic performance is often drastically affected by the pollutant sources and reaction conditions. It also highlights the primary routes for catalyst deactivation and discusses protocols for their subsequent reactivation. Kinetic models and proposed oxidation mechanisms for representative VOCs are also provided. Typical catalytic reactors and oxidizers for industrial VOC destruction are further discussed. We believe that this Review will provide a great foundation and reference point for future design and development in this field.