Daniele Fava

Bio: Daniele Fava is an academic researcher from University of Toronto. The author has contributed to research in topics: Nanorod & Amphiphile. The author has an hindex of 7, co-authored 7 publications receiving 1160 citations.

Self-assembly of metal-polymer analogues of amphiphilic triblock copolymers.

Abstract: Organized arrays of anisotropic nanoparticles show electronic and optical properties that originate from the coupling of shape-dependent properties of the individual nanorods. The organization of nanorods in a controllable and predictable way provides a route to the fabrication of new materials and functional devices. So far, significant progress has been achieved in the self-assembly of nanorod arrays, yet the realization of a range of different structures requires changing the surface chemistry of the nanoparticles. We organized metal nanorods in structures with varying geometries by using a striking analogy between amphiphilic ABA triblock copolymers and the hydrophilic nanorods tethered with hydrophobic polymer chains at both ends. The self-assembly was tuneable and reversible and it was achieved solely by changing the solvent quality for the constituent blocks. This approach provides a new route to the organization of anisotropic nanoparticles by using the strategies that are established for the self-assembly of block copolymers.

Microgels Loaded with Gold Nanorods: Photothermally Triggered Volume Transitions under Physiological Conditions†

Abstract: Photothermally driven volume transitions in polymer microgels have promising applications for site-specific drug delivery and photodynamic therapy. We studied the temperature-induced volume phase transitions for a series of thermoresponsive microgels of various compositions to find a system with a sharp transition in the physiologically relevant range spanning 38−41 °C in 0.01 M phosphate-buffered saline solution (pH = 7.4). We found that the poly(N-isopropylacrylamide-maleic acid) microgels showed an 8-fold decrease in size under the aforementioned conditions. These microgels were loaded with gold nanorods designed to absorb in the near-IR spectral range. Following irradiation at λ = 809 nm, the microgels underwent a large, reversible, photothermally triggered change in volume. We believe that this microgel system is a promising candidate for photothermally controlled drug release.

Self-assembly of metal--polymer analogues of amphiphilic triblock copolymers

Abstract: Organized arrays of anisotropic nanoparticles show electronic and optical properties that originate from the coupling of shape-dependent properties of the individual nanorods. The organization of nanorods in a controllable and predictable way provides a route to the fabrication of new materials and functional devices. So far, significant progress has been achieved in the self-assembly of nanorod arrays, yet the realization of a range of different structures requires changing the surface chemistry of the nanoparticles. We organized metal nanorods in structures with varying geometries by using a striking analogy between amphiphilic ABA triblock copolymers and the hydrophilic nanorods tethered with hydrophobic polymer chains at both ends. The self-assembly was tuneable and reversible and it was achieved solely by changing the solvent quality for the constituent blocks. This approach provides a new route to the organization of anisotropic nanoparticles by using the strategies that are established for the self-assembly of block copolymers.

Controlling the synthesis and assembly of silver nanostructures for plasmonic applications

Abstract: Coinage metals, such as Au, Ag, and Cu, have been important materials throughout history.1 While in ancient cultures they were admired primarily for their ability to reflect light, their applications have become far more sophisticated with our increased understanding and control of the atomic world. Today, these metals are widely used in electronics, catalysis, and as structural materials, but when they are fashioned into structures with nanometer-sized dimensions, they also become enablers for a completely different set of applications that involve light. These new applications go far beyond merely reflecting light, and have renewed our interest in maneuvering the interactions between metals and light in a field known as plasmonics.2–6 In plasmonics, the metal nanostructures can serve as antennas to convert light into localized electric fields (E-fields) or as waveguides to route light to desired locations with nanometer precision. These applications are made possible through a strong interaction between incident light and free electrons in the nanostructures. With a tight control over the nanostructures in terms of size and shape, light can be effectively manipulated and controlled with unprecedented accuracy.3,7 While many new technologies stand to be realized from plasmonics, with notable examples including superlenses,8 invisible cloaks,9 and quantum computing,10,11 conventional technologies like microprocessors and photovoltaic devices could also be made significantly faster and more efficient with the integration of plasmonic nanostructures.12–15 Of the metals, Ag has probably played the most important role in the development of plasmonics, and its unique properties make it well-suited for most of the next-generation plasmonic technologies.16–18 1.1. What is Plasmonics? Plasmonics is related to the localization, guiding, and manipulation of electromagnetic waves beyond the diffraction limit and down to the nanometer length scale.4,6 The key component of plasmonics is a metal, because it supports surface plasmon polariton modes (indicated as surface plasmons or SPs throughout this review), which are electromagnetic waves coupled to the collective oscillations of free electrons in the metal. While there are a rich variety of plasmonic metal nanostructures, they can be differentiated based on the plasmonic modes they support: localized surface plasmons (LSPs) or propagating surface plasmons (PSPs).5,19 In LSPs, the time-varying electric field associated with the light (Eo) exerts a force on the gas of negatively charged electrons in the conduction band of the metal and drives them to oscillate collectively. At a certain excitation frequency (w), this oscillation will be in resonance with the incident light, resulting in a strong oscillation of the surface electrons, commonly known as a localized surface plasmon resonance (LSPR) mode.20 This phenomenon is illustrated in Figure 1A. Structures that support LSPRs experience a uniform Eo when excited by light as their dimensions are much smaller than the wavelength of the light. Figure 1 Schematic illustration of the two types of plasmonic nanostructures discussed in this article as excited by the electric field (Eo) of incident light with wavevector (k). In (A) the nanostructure is smaller than the wavelength of light and the free electrons ... In contrast, PSPs are supported by structures that have at least one dimension that approaches the excitation wavelength, as shown in Figure 1B.4 In this case, the Eo is not uniform across the structure and other effects must be considered. In such a structure, like a nanowire for example, SPs propagate back and forth between the ends of the structure. This can be described as a Fabry-Perot resonator with resonance condition l=nλsp, where l is the length of the nanowire, n is an integer, and λsp is the wavelength of the PSP mode.21,22 Reflection from the ends of the structure must also be considered, which can change the phase and resonant length. Propagation lengths can be in the tens of micrometers (for nanowires) and the PSP waves can be manipulated by controlling the geometrical parameters of the structure.23

Directed Self-Assembly of Nanoparticles

Abstract: Within the field of nanotechnology, nanoparticles are one of the most prominent and promising candidates for technological applications. Self-assembly of nanoparticles has been identified as an important process where the building blocks spontaneously organize into ordered structures by thermodynamic and other constraints. However, in order to successfully exploit nanoparticle self-assembly in technological applications and to ensure efficient scale-up, a high level of direction and control is required. The present review critically investigates to what extent self-assembly can be directed, enhanced, or controlled by either changing the energy or entropy landscapes, using templates or applying external fields.

Gold Nanorods: From Synthesis and Properties to Biological and Biomedical Applications

Abstract: Noble metal nanoparticles are capable of confining resonant photons in such a manner as to induce coherent surface plasmon oscillation of their conduction band electrons, a phenomenon leading to two important properties. Firstly, the confinement of the photon to the nanoparticle's dimensions leads to a large increase in its electromagnetic field and consequently great enhancement of all the nanoparticle's radiative properties, such as absorption and scattering. Moreover, by confining the photon's wavelength to the nanoparticle's small dimensions, there exists enhanced imaging resolving powers, which extend well below the diffraction limit, a property of considerable importance in potential device applications. Secondly, the strongly absorbed light by the nanoparticles is followed by a rapid dephasing of the coherent electron motion in tandem with an equally rapid energy transfer to the lattice, a process integral to the technologically relevant photothermal properties of plasmonic nanoparticles. Of all the possible nanoparticle shapes, gold nanorods are especially intriguing as they offer strong plasmonic fields while exhibiting excellent tunability and biocompatibility. We begin this review of gold nanorods by summarizing their radiative and nonradiative properties. Their various synthetic methods are then outlined with an emphasis on the seed-mediated chemical growth. In particular, we describe nanorod spontaneous self-assembly, chemically driven assembly, and polymer-based alignment. The final section details current studies aimed at applications in the biological and biomedical fields.

Engineered Nanoparticles for Drug Delivery in Cancer Therapy

Abstract: In medicine, nanotechnology has sparked a rapidly growing interest as it promises to solve a number of issues associated with conventional therapeutic agents, including their poor water solubility (at least, for most anticancer drugs), lack of targeting capability, nonspecific distribution, systemic toxicity, and low therapeutic index. Over the past several decades, remarkable progress has been made in the development and application of engineered nanoparticles to treat cancer more effectively. For example, therapeutic agents have been integrated with nanoparticles engineered with optimal sizes, shapes, and surface properties to increase their solubility, prolong their circulation half-life, improve their biodistribution, and reduce their immunogenicity. Nanoparticles and their payloads have also been favorably delivered into tumors by taking advantage of the pathophysiological conditions, such as the enhanced permeability and retention effect, and the spatial variations in the pH value. Additionally, targeting ligands (e.g., small organic molecules, peptides, antibodies, and nucleic acids) have been added to the surface of nanoparticles to specifically target cancerous cells through selective binding to the receptors overexpressed on their surface. Furthermore, it has been demonstrated that multiple types of therapeutic drugs and/or diagnostic agents (e.g., contrast agents) could be delivered through the same carrier to enable combination therapy with a potential to overcome multidrug resistance, and real-time readout on the treatment efficacy. It is anticipated that precisely engineered nanoparticles will emerge as the next-generation platform for cancer therapy and many other biomedical applications.