David F. Young

Bio: David F. Young is an academic researcher from Langley Research Center. The author has contributed to research in topics: Cloud physics & Satellite. The author has an hindex of 29, co-authored 89 publications receiving 3831 citations.

CERES Edition-2 Cloud Property Retrievals Using TRMM VIRS and Terra and Aqua MODIS Data—Part I: Algorithms

Abstract: The National Aeronautics and Space Administration's Clouds and the Earth's Radiant Energy System (CERES) Project was designed to improve our understanding of the relationship between clouds and solar and longwave radiation. This is achieved using satellite broad-band instruments to map the top-of-atmosphere radiation fields with coincident data from satellite narrow-band imagers employed to retrieve the properties of clouds associated with those fields. This paper documents the CERES Edition-2 cloud property retrieval system used to analyze data from the Tropical Rainfall Measuring Mission Visible and Infrared Scanner and by the MODerate-resolution Imaging Spectrometer instruments on board the Terra and Aqua satellites covering the period 1998 through 2007. Two daytime retrieval methods are explained: the Visible Infrared Shortwave-infrared Split-window Technique for snow-free surfaces and the Shortwave-infrared Infrared Near-infrared Technique for snow or ice-covered surfaces. The Shortwave-infrared Infrared Split-window Technique is used for all surfaces at night. These methods, along with the ancillary data and empirical parameterizations of cloud thickness, are used to derive cloud boundaries, phase, optical depth, effective particle size, and condensed/frozen water path at both pixel and CERES footprint levels. Additional information is presented, detailing the potential effects of satellite calibration differences, highlighting methods to compensate for spectral differences and correct for atmospheric absorption and emissivity, and discussing known errors in the code. Because a consistent set of algorithms, auxiliary input, and calibrations across platforms are used, instrument and algorithm-induced changes in the data record are minimized. This facilitates the use of the CERES data products for studying climate-scale trends.

Geostationary Enhanced Temporal Interpolation for CERES Flux Products

Abstract: The Clouds and the Earth's Radiant Energy System (CERES) instruments on board the Terra and Aqua spacecraft continue to provide an unprecedented global climate record of the earth's top-of-atmosphere (TOA) energy budget since March 2000. A critical step in determining accurate daily averaged flux involves estimating the flux between CERES Terra or Aqua overpass times. CERES employs the CERES-only (CO) and the CERES geostationary (CG) temporal interpolation methods. The CO method assumes that the cloud properties at the time of the CERES observation remain constant and that it only accounts for changes in albedo with solar zenith angle and diurnal land heating, by assuming a shape for unresolved changes in the diurnal cycle. The CG method enhances the CERES data by explicitly accounting for changes in cloud and radiation between CERES observation times using 3-hourly imager data from five geostationary (GEO) satellites. To maintain calibration traceability, GEO radiances are calibrated against Moderate Resolution Imaging Spectroradiometer (MODIS) and the derived GEO fluxes are normalized to the CERES measurements. While the regional (1 deg latitude x 1 deg longitude) monthly-mean difference between the CG and CO methods can exceed 25 W m(sub -2) over marine stratus and land convection, these regional biases nearly cancel in the global mean. The regional monthly CG shortwave (SW) and longwave (LW) flux uncertainty is reduced by 20%, whereas the daily uncertainty is reduced by 50% and 20%, respectively, over the CO method, based on comparisons with 15-min Geostationary Earth Radiation Budget (GERB) data.

Angular Distribution Models for Top-of-Atmosphere Radiative Flux Estimation from the Clouds and the Earth's Radiant Energy System Instrument on the Tropical Rainfall Measuring Mission Satellite. Part II; Validation

Abstract: Top-of-atmosphere (TOA) radiative fluxes from the Clouds and the Earth s Radiant Energy System (CERES) are estimated from empirical angular distribution models (ADMs) that convert instantaneous radiance measurements to TOA fluxes. This paper evaluates the accuracy of CERES TOA fluxes obtained from a new set of ADMs developed for the CERES instrument onboard the Tropical Rainfall Measuring Mission (TRMM). The uncertainty in regional monthly mean reflected shortwave (SW) and emitted longwave (LW) TOA fluxes is less than 0.5 W/sq m, based on comparisons with TOA fluxes evaluated by direct integration of the measured radiances. When stratified by viewing geometry, TOA fluxes from different angles are consistent to within 2% in the SW and 0.7% (or 2 W/sq m) in the LW. In contrast, TOA fluxes based on ADMs from the Earth Radiation Budget Experiment (ERBE) applied to the same CERES radiance measurements show a 10% relative increase with viewing zenith angle in the SW and a 3.5% (9 W/sq m) decrease with viewing zenith angle in the LW. Based on multiangle CERES radiance measurements, 18 regional instantaneous TOA flux errors from the new CERES ADMs are estimated to be 10 W/sq m in the SW and, 3.5 W/sq m in the LW. The errors show little or no dependence on cloud phase, cloud optical depth, and cloud infrared emissivity. An analysis of cloud radiative forcing (CRF) sensitivity to differences between ERBE and CERES TRMM ADMs, scene identification, and directional models of albedo as a function of solar zenith angle shows that ADM and clear-sky scene identification differences can lead to an 8 W/sq m root-mean-square (rms) difference in 18 daily mean SW CRF and a 4 W/sq m rms difference in LW CRF. In contrast, monthly mean SW and LW CRF differences reach 3 W/sq m. CRF is found to be relatively insensitive to differences between the ERBE and CERES TRMM directional models.

Clouds and the Earth's Radiant Energy System (CERES): algorithm overview

Abstract: The Clouds and the Earth's Radiant Energy System (CERES) is part of NASA's Earth Observing System (EOS), CERES objectives include the following. (1) For climate change analysis, provide a continuation of the Earth Radiation Budget Experiment (ERBE) record of radiative fluxes at the top-of-the-atmosphere (TOA), analyzed using the same techniques as the existing ERBE data. (2) Double the accuracy of estimates of radiative fluxes at TOA and the Earth's surface. (3) Provide the first long-term global estimates of the radiative fluxes within the Earth's atmosphere. (4) Provide cloud property estimates collocated in space and time that are consistent with the radiative fluxes from surface to TOA. In order to accomplish these goals, CERES uses data from a combination of spaceborne instruments: CERES scanners, which are an improved version of the ERBE broadband radiometers, and collocated cloud spectral imager data on the same spacecraft. The CERES cloud and radiative flux data products should prove extremely useful in advancing the understanding of cloud-radiation interactions, particularly cloud feedback effects on the Earth's radiation balance. For this reason, the CERES data should be fundamental to the ability to understand, detect, and predict global climate change. CERES results should also be very useful for studying regional climate changes associated with deforestation, desertification, anthropogenic aerosols, and ENSO events. This overview summarizes the Release 3 version of the planned CERES data products and data analysis algorithms. These algorithms are a prototype for the system that will produce the scientific data required for studying the role of clouds and radiation in the Earth's climate system.

Achieving Climate Change Absolute Accuracy in Orbit

Abstract: The Climate Absolute Radiance and Refractivity Observatory (CLARREO) mission will provide a calibration laboratory in orbit for the purpose of accurately measuring and attributing climate change. CLARREO measurements establish new climate change benchmarks with high absolute radiometric accuracy and high statistical confidence across a wide range of essential climate variables. CLARREO's inherently high absolute accuracy will be verified and traceable on orbit to Systeme Internationale (SI) units. The benchmarks established by CLARREO will be critical for assessing changes in the Earth system and climate model predictive capabilities for decades into the future as society works to meet the challenge of optimizing strategies for mitigating and adapting to climate change. The CLARREO benchmarks are derived from measurements of the Earth's thermal infrared spectrum (5–50 μm), the spectrum of solar radiation reflected by the Earth and its atmosphere (320–2300 nm), and radio occultation refractivity from which...

Advances in understanding clouds from ISCCP

Abstract: This progress report on the International Satellite Cloud Climatology Project (ISCCP) describes changes made to produce new cloud data products (D data), examines the evidence that these changes are improvements over the previous version (C data), summarizes some results, and discusses plans for the ISCCP through 2005. By late 1999 all datasets will be available for the period from July 1983 through December 1997. The most significant changes in the new D-series cloud datasets are 1) revised radiance calibrations to remove spurious changes in the long-term record, 2) increased cirrus detection sensitivity over land, 3) increased low-level cloud detection sensitivity in polar regions, 4) reduced biases in cirrus cloud properties using an ice crystal microphysics model in place of a liquid droplet microphysics model, and 5) increased detail about the variations of cloud properties. The ISCCP calibrations are now the most complete and self-consistent set of calibrations available for all the weather...

The atmospheric general circulation model ECHAM-4: Model description and simulation of present-day climate

Abstract: A detailed description of the fourth-generation ECHAM model is presented. Compared to the previous version, ECHAM3, a number of substantial changes have been introduced in both the numerics and physics of the model. These include a semi-Lagrangian transport scheme for water vapour, cloud water and trace substances, a new radiation scheme (ECMWF) with modifications concerning the water vapour continuum, cloud optical properties and greenhouse gases, a new formulation of the vertical diffusion coefficients as functions of turbulent kinetic energy, and a new closure for deep convection based on convective instability instead of moisture convergence. Minor changes concern the parameterizations of horizontal diffusion, stratiform clouds and land surface processes. Also, a new dataset of land surface parameters have been compiled for the new model. The climatology of the model, derived from two extended AMIP simulations at T42L19 resolution, is documented and compared with ECMWF operational analyses. Some of the biases noted for the previous model version remain virtually unchanged. For example, the polar upper troposphere and lower stratosphere is much too cold, and the zonal wind errors become very large above the 200 hPa level. Furthermore, the low-frequency variability is still too small but the errors are reduced by about 50% compared to ECHAM3.

The Moderate Resolution Imaging Spectroradiometer (MODIS): land remote sensing for global change research

Abstract: The first Moderate Resolution Imaging Spectroradiometer (MODIS) instrument is planned for launch by NASA in 1998. This instrument will provide a new and improved capability for terrestrial satellite remote sensing aimed at meeting the needs of global change research. The MODIS standard products will provide new and improved tools for moderate resolution land surface monitoring. These higher order data products have been designed to remove the burden of certain common types of data processing from the user community and meet the more general needs of global-to-regional monitoring, modeling, and assessment. The near-daily coverage of moderate resolution data from MODIS, coupled with the planned increase in high-resolution sampling from Landsat 7, will provide a powerful combination of observations. The full potential of MODIS will be realized once a stable and well-calibrated time-series of multispectral data has been established. In this paper the proposed MODIS standard products for land applications are described along with the current plans for data quality assessment and product validation.

Discriminating clear sky from clouds with MODIS

Abstract: The MODIS cloud mask uses several cloud detection tests to indicate a level of confidence that the MEDIS is observing clear skies. It will be produced globally at single-pixel resolution; the algorithm uses as many as 14 of the MEDIS 36 spectral bands to maximize reliable cloud detection and to mitigate past difficulties experienced by sensors with coarser spatial resolution or fewer spectral bands. The MEDIS cloud mask is ancillary input to MEDIS land, ocean, and atmosphere science algorithms to suggest processing options. The MEDIS cloud mask algorithm will operate in near real time in a limited computer processing and storage facility with simple easy-to-follow algorithm paths. The MEDIS cloud mask algorithm identifies several conceptual domains according to surface type and solar illumination, including land, water, snow/ice, desert, and coast for both day and night. Once a pixel has been assigned to a particular domain (defining an algorithm path), a series of threshold tests attempts to detect the presence of clouds in the instrument field of view. Each cloud detection test returns a confidence level that the pixel is clear ranging in value from 1 (high) to zero (low). There are several types of tests, where detection of different cloud conditions relies on different tests. Tests capable of detecting similar cloud conditions are grouped together. While these groups are arranged so that independence between them is maximized, few, if any, spectral tests are completely independent. The minimum confidence from all tests within a group is taken to be representative of that group. These confidences indicate absence of particular cloud types. The product of all the group confidences is used to determine the confidence of finding clear-sky conditions. This paper outlines the MEDIS cloud masking algorithm. While no present sensor has all of the spectral bands necessary for testing the complete MEDIS cloud mask, initial validation of some of the individual cloud tests is presented using existing remote sensing data sets.