David Hui

Bio: David Hui is an academic researcher from University of New Orleans. The author has contributed to research in topics: Nanocomposite & Ultimate tensile strength. The author has an hindex of 69, co-authored 423 publications receiving 23547 citations. Previous affiliations of David Hui include University of Sheffield & Kyung Hee University.

Additive manufacturing (3D printing): A review of materials, methods, applications and challenges

Abstract: Freedom of design, mass customisation, waste minimisation and the ability to manufacture complex structures, as well as fast prototyping, are the main benefits of additive manufacturing (AM) or 3D printing. A comprehensive review of the main 3D printing methods, materials and their development in trending applications was carried out. In particular, the revolutionary applications of AM in biomedical, aerospace, buildings and protective structures were discussed. The current state of materials development, including metal alloys, polymer composites, ceramics and concrete, was presented. In addition, this paper discussed the main processing challenges with void formation, anisotropic behaviour, the limitation of computer design and layer-by-layer appearance. Overall, this paper gives an overview of 3D printing, including a survey on its benefits and drawbacks as a benchmark for future research and development.

3D printing of polymer matrix composites: A review and prospective

Abstract: The use of 3D printing for rapid tooling and manufacturing has promised to produce components with complex geometries according to computer designs. Due to the intrinsically limited mechanical properties and functionalities of printed pure polymer parts, there is a critical need to develop printable polymer composites with high performance. 3D printing offers many advantages in the fabrication of composites, including high precision, cost effective and customized geometry. This article gives an overview on 3D printing techniques of polymer composite materials and the properties and performance of 3D printed composite parts as well as their potential applications in the fields of biomedical, electronics and aerospace engineering. Common 3D printing techniques such as fused deposition modeling, selective laser sintering, inkjet 3D printing, stereolithography, and 3D plotting are introduced. The formation methodology and the performance of particle-, fiber- and nanomaterial-reinforced polymer composites are emphasized. Finally, important limitations are identified to motivate the future research of 3D printing.

The revolutionary creation of new advanced materials - Carbon nanotube composites

Abstract: Since the discovery of carbon nanotubes at the beginning of the last decade, extensive research related to the nanotubes in the fields of chemistry, physics, materials science and engineering, and electrical and electronic engineering has been found increasingly. The nanotubes, having an extreme small physical size (diameter ≈1 nm) and many unique mechanical and electrical properties depending on its hexagonal lattice arrangement and chiral vector have been appreciated as ideal fibres for nanocomposite structures. It has been reported that the nanotubes own a remarkable mechanical properties with theoretical Young's modulus and tensile strength as high as 1 TPa and 200 GPa, respectively. Since the nanotubes are highly chemical insert and able to sustain a high strain (10–30%) without breakage, it could be foreseen that nanotube-related structures could be designed for nanoinstrument to create ultra-small electronic circuits and used as strong, light and high toughness fibres for nanocomposite structures. In this paper, recent researches and applications on carbon nanotubes and nanotube composites are reviewed. The interfacial bonding properties, mechanical performance and reliability of nanotube/polymer composites will be discussed.

Recycling of plastic solid waste: A state of art review and future applications

Abstract: Plastic solid waste (PSW) of polymers (like: high density polyethylene (HDPE), low density polyethylene (LDPE), Nylon etc.) is creating new challenges, which in today's scenario are major research concerns. A sharp rise has been observed in production of different products based on different plastic material. This huge increase in plastic commodities also increases the waste generation thus creating new challenges. Some researchers have reported work in the field of PSW management with different recycling methods. This paper compiles the different research work done by researchers in this field of recycling and progress in recovery and management of PSW by different methods (i.e. Primary, secondary, tertiary and quaternary) along with the various identification/separation techniques. Further, this paper reviews the effect on properties of virgin and recycled HDPE/LDPE/Nylon PSW with different reinforcements like sand, natural fibre, hemp fibre, metal powder etc.

A short review on basalt fiber reinforced polymer composites

Abstract: A recent increase in the use of ecofriendly, natural fibers as reinforcement for the fabrication of lightweight, low cost polymer composites can be seen globally. One such material of interest currently being extensively used is basalt fiber, which is cost-effective and offers exceptional properties over glass fibers. The prominent advantages of these composites include high specific mechano-physico-chemical properties, biodegradability, and non-abrasive qualities to name a few. This article presents a short review on basalt fibers used as a reinforcement material for composites and discusses them as an alternative to the use of glass fibers. The paper also discusses the basics of basalt chemistry and its classification. Apart from this, an attempt to showcase the increasing trend in research publications and activity in the area of basalt fibers is also covered. Further sections discuss the improvement in mechanical, thermal and chemical resistant properties achieved for applications in specific industries.

Fast parallel algorithms for short-range molecular dynamics

Abstract: Three parallel algorithms for classical molecular dynamics are presented. The first assigns each processor a fixed subset of atoms; the second assigns each a fixed subset of inter-atomic forces to compute; the third assigns each a fixed spatial region. The algorithms are suitable for molecular dynamics models which can be difficult to parallelize efficiently—those with short-range forces where the neighbors of each atom change rapidly. They can be implemented on any distributed-memory parallel machine which allows for message-passing of data between independently executing processors. The algorithms are tested on a standard Lennard-Jones benchmark problem for system sizes ranging from 500 to 100,000,000 atoms on several parallel supercomputers--the nCUBE 2, Intel iPSC/860 and Paragon, and Cray T3D. Comparing the results to the fastest reported vectorized Cray Y-MP and C90 algorithm shows that the current generation of parallel machines is competitive with conventional vector supercomputers even for small problems. For large problems, the spatial algorithm achieves parallel efficiencies of 90% and a 1840-node Intel Paragon performs up to 165 faster than a single Cray C9O processor. Trade-offs between the three algorithms and guidelines for adapting them to more complex molecular dynamics simulations are also discussed.

Additive manufacturing (3D printing): A review of materials, methods, applications and challenges

Abstract: Freedom of design, mass customisation, waste minimisation and the ability to manufacture complex structures, as well as fast prototyping, are the main benefits of additive manufacturing (AM) or 3D printing. A comprehensive review of the main 3D printing methods, materials and their development in trending applications was carried out. In particular, the revolutionary applications of AM in biomedical, aerospace, buildings and protective structures were discussed. The current state of materials development, including metal alloys, polymer composites, ceramics and concrete, was presented. In addition, this paper discussed the main processing challenges with void formation, anisotropic behaviour, the limitation of computer design and layer-by-layer appearance. Overall, this paper gives an overview of 3D printing, including a survey on its benefits and drawbacks as a benchmark for future research and development.

Effects of particle size, particle/matrix interface adhesion and particle loading on mechanical properties of particulate–polymer composites

Abstract: There have been a number of review papers on layered silicate and carbon nanotube reinforced polymer nanocomposites, in which the fillers have high aspect ratios. Particulate–polymer nanocomposites containing fillers with small aspect ratios are also an important class of polymer composites. However, they have been apparently overlooked. Thus, in this paper, detailed discussions on the effects of particle size, particle/matrix interface adhesion and particle loading on the stiffness, strength and toughness of such particulate–polymer composites are reviewed. To develop high performance particulate composites, it is necessary to have some basic understanding of the stiffening, strengthening and toughening mechanisms of these composites. A critical evaluation of published experimental results in comparison with theoretical models is given.