David J. Jones

Bio: David J. Jones is an academic researcher from University of Melbourne. The author has contributed to research in topics: Polymer solar cell & Organic solar cell. The author has an hindex of 36, co-authored 143 publications receiving 4927 citations. Previous affiliations of David J. Jones include University of Tasmania & University of Cambridge.

Toward Large Scale Roll‐to‐Roll Production of Fully Printed Perovskite Solar Cells

Abstract: Fully printed perovskite solar cells are demonstrated with slot-die coating, a scalable printing method. A sequential slot-die coating process is developed to produce efficient perovskite solar cells and to be used in a large-scale roll-to-roll printing process. All layers excluding the electrodes are printed and devices demonstrate up to 11.96% power conversion efficiency. It is also demonstrated that the new process can be used in roll-to-roll production.

A molecular nematic liquid crystalline material for high-performance organic photovoltaics

Abstract: Solution-processed organic photovoltaic cells (OPVs) hold great promise to enable roll-to-roll printing of environmentally friendly, mechanically flexible and cost-effective photovoltaic devices. Nevertheless, many high-performing systems show best power conversion efficiencies (PCEs) with a thin active layer (thickness is ~100 nm) that is difficult to translate to roll-to-roll processing with high reproducibility. Here we report a new molecular donor, benzodithiophene terthiophene rhodanine (BTR), which exhibits good processability, nematic liquid crystalline behaviour and excellent optoelectronic properties. A maximum PCE of 9.3% is achieved under AM 1.5G solar irradiation, with fill factor reaching 77%, rarely achieved in solution-processed OPVs. Particularly promising is the fact that BTR-based devices with active layer thicknesses up to 400 nm can still afford high fill factor of ~70% and high PCE of ~8%. Together, the results suggest, with better device architectures for longer device lifetime, BTR is an ideal candidate for mass production of OPVs.

Organic solar cells using a high-molecular-weight benzodithiophene-benzothiadiazole copolymer with an efficiency of 9.4%.

Abstract: A high molecular weight donor-acceptor conjugated polymer is synthesized using the Suzuki polycondensation method. Using this polymer, a single-junction bulk-heterojunction solar cell is fabricated giving a power conversion efficiency of 9.4% using a fullerene-modified ZnO interlayer at the cathode contact.

Discovery and optimization of new chromium catalysts for ethylene oligomerization and polymerization aided by high-throughput screening.

Abstract: High throughput screening (HTS) of a 205 member Schiff base salicylaldimine ligand library derived from salicylaldehydes bearing bulky ortho-substituents, i.e., 9-anthracenyl, 1,4,5,8-tetramethylanthracenyl or triptycenyl, reacted in-situ with (p-tolyl)CrCl2(thf)3, identified two new classes of highly active chromium based systems for the oligomerization and polymerization of ethylene, respectively. The polymerization system comprises bidentate ortho-substituted anthracenyl Schiff bases bearing small primary or secondary alkyl imine substituents. The oligomerization catalysts are based upon tridentate ortho-triptycenyl-substituted Schiff bases with pyridylmethyl or quinolyl substituents. Validation tests confirmed polymerization productivities of up to 3000 g x mmol(-1)h(-1)bar(-1) for the polymerization catalyst systems while the oligomerization catalysts gave productivities up to 10 000 g x mmol(-1)h(-1)bar(-1). Key catalyst precursors have been characterized by X-ray crystallography.

Experimental evidence for large ring metallacycle intermediates in polyethylene chain growth using homogeneous chromium catalysts.

Abstract: Deuterio-ethylene labeling studies on two homogeneous chromium ethylene oligomerization catalysts show that chain propagation proceeds via metallacyclic intermediates; reactions performed in the presence of 1-nonene show no incorporation of the higher olefin, strongly implicating the involvement of large ring metallacycles.

I and i

Abstract: There is, I think, something ethereal about i —the square root of minus one. I remember first hearing about it at school. It seemed an odd beast at that time—an intruder hovering on the edge of reality. Usually familiarity dulls this sense of the bizarre, but in the case of i it was the reverse: over the years the sense of its surreal nature intensified. It seemed that it was impossible to write mathematics that described the real world in …

Synthesis of Light-Emitting Conjugated Polymers for Applications in Electroluminescent Devices

Abstract: A review was presented to demonstrate a historical description of the synthesis of light-emitting conjugated polymers for applications in electroluminescent devices. Electroluminescence (EL) was first reported in poly(para-phenylene vinylene) (PPV) in 1990 and researchers continued to make significant efforts to develop conjugated materials as the active units in light-emitting devices (LED) to be used in display applications. Conjugated oligomers were used as luminescent materials and as models for conjugated polymers in the review. Oligomers were used to demonstrate a structure and property relationship to determine a key polymer property or to demonstrate a technique that was to be applied to polymers. The review focused on demonstrating the way polymer structures were made and the way their properties were controlled by intelligent and rational and synthetic design.

Advances in non-metallocene olefin polymerization catalysis.

Abstract: B. Anionic Ligands 302 IX. Group 9 Catalysts 302 X. Group 10 Catalysts 303 A. Neutral Ligands 303 1. R-Diimine and Related Ligands 303 2. Other Neutral Nitrogen-Based Ligands 304 3. Chelating Phosphorus-Based Ligands 304 B. Monoanionic Ligands 305 1. [PO] Chelates 305 2. [NO] Chelates 306 3. Other Monoanionic Ligands 306 4. Carbon-Based Ligands 306 XI. Group 11 Catalysts 307 XII. Group 12 Catalysts 307 XIII. Group 13 Catalysts 307 XIV. Summary and Outlook 308 XV. Glossary 308 XVI. References 308

Efficient, stable and scalable perovskite solar cells using poly(3-hexylthiophene)

Abstract: Perovskite solar cells typically comprise electron- and hole-transport materials deposited on each side of a perovskite active layer. So far, only two organic hole-transport materials have led to state-of-the-art performance in these solar cells1: poly(triarylamine) (PTAA)2–5 and 2,2ʹ,7,7ʹ-tetrakis(N,N-di-p-methoxyphenylamine)-9,9ʹ-spirobifluorene (spiro-OMeTAD)6,7. However, these materials have several drawbacks in terms of commercialization, including high cost8, the need for hygroscopic dopants that trigger degradation of the perovskite layer9 and limitations in their deposition processes10. Poly(3-hexylthiophene) (P3HT) is an alternative hole-transport material with excellent optoelectronic properties11–13, low cost8,14 and ease of fabrication15–18, but so far the efficiencies of perovskite solar cells using P3HT have reached only around 16 per cent19. Here we propose a device architecture for highly efficient perovskite solar cells that use P3HT as a hole-transport material without any dopants. A thin layer of wide-bandgap halide perovskite is formed on top of the narrow-bandgap light-absorbing layer by an in situ reaction of n-hexyl trimethyl ammonium bromide on the perovskite surface. Our device has a certified power conversion efficiency of 22.7 per cent with hysteresis of ±0.51 per cent; exhibits good stability at 85 per cent relative humidity without encapsulation; and upon encapsulation demonstrates long-term operational stability for 1,370 hours under 1-Sun illumination at room temperature, maintaining 95 per cent of the initial efficiency. We extend our platform to large-area modules (24.97 square centimetres)—which are fabricated using a scalable bar-coating method for the deposition of P3HT—and achieve a power conversion efficiency of 16.0 per cent. Realizing the potential of P3HT as a hole-transport material by using a wide-bandgap halide could be a valuable direction for perovskite solar-cell research. A double-layered halide architecture for perovskite solar cells enables the use of dopant-free poly(3-hexylthiophene) as a hole-transport material, forming stable and scalable devices with a certified power conversion efficiency of 22.7 per cent.

Ab initio calculation of vibrational absorption and circular dichroism spectra using density functional force fields

Abstract: : The unpolarized absorption and circular dichroism spectra of the fundamental vibrational transitions of the chiral molecule, 4-methyl-2-oxetanone, are calculated ab initio. Harmonic force fields are obtained using Density Functional Theory (DFT), MP2, and SCF methodologies and a 5S4P2D/3S2P (TZ2P) basis set. DFT calculations use the Local Spin Density Approximation (LSDA), BLYP, and Becke3LYP (B3LYP) density functionals. Mid-IR spectra predicted using LSDA, BLYP, and B3LYP force fields are of significantly different quality, the B3LYP force field yielding spectra in clearly superior, and overall excellent, agreement with experiment. The MP2 force field yields spectra in slightly worse agreement with experiment than the B3LYP force field. The SCF force field yields spectra in poor agreement with experiment.The basis set dependence of B3LYP force fields is also explored: the 6-31G* and TZ2P basis sets give very similar results while the 3-21G basis set yields spectra in substantially worse agreements with experiment. jg