David J. Young

Bio: David J. Young is an academic researcher from University of New South Wales. The author has contributed to research in topics: Corrosion & Alloy. The author has an hindex of 48, co-authored 410 publications receiving 10218 citations. Previous affiliations of David J. Young include University of Toronto & UOP LLC.

High Temperature Oxidation and Corrosion of Metals

Abstract: High Temperature Oxidation and Corrosion of Metals, Second Edition, provides a high level understanding of the fundamental mechanisms of high temperature alloy oxidation. It uses this understanding to develop methods of predicting oxidation rates and the way they change with temperature, gas chemistry, and alloy composition. The book focuses on the design and selection of alloy compositions which provide optimal resistance to attack by corrosive gases, providing a rigorous treatment of the thermodynamics and kinetics underlying high temperature alloy corrosion. In addition, it emphasizes quantitative calculations for predicting reaction rates and the effects of temperature, oxidant activities, and alloy compositions. Users will find this book to be an indispensable source of information for researchers and students who are dealing with high temperature corrosion.Emphasizes quantitative calculations for predicting reaction rates and the effects of temperature, oxidant activities, and alloy compositionsUses phase diagrams and diffusion paths to analyze and interpret scale structures and internal precipitation distributionsPresents a detailed examination of corrosion in industrial gases (water vapor effects, carburization and metal dusting, sulphidation)Contains numerous micrographs, phase diagrams, and tabulations of relevant thermodynamic and kinetic data Combines physical chemistry and materials science methodologiesProvides two completely new chapters (chapters 11 and 13), and numerous other updates throughout the text

Chromium Volatilization Rates from Cr2O3 Scales into Flowing Gases Containing Water Vapor

Abstract: The mass-transfer coefficient for CrO2(OH)2 volatilization into flowing air-10% H2O or steam was evaluated using classical gas transport theory in the viscous-flow regime. The resulting values were applied to new thermodynamic data for the reaction: 1/2 Cr2O3 + 3/4 O2(g) + H2O(g) = CrO2(OH)2(g) to predict Cr-evaporation fluxes in the temperature range 650–800°C. The calculation was found to predict correctly the Cr-loss rate measured from foil specimens of Fe–20Cr–25Ni+Nb (alloy 709) exposed for up to 10,000 hr under these conditions. In 240 atm (24 MPa) high-purity steam, the calculations suggest that the Cr-evaporation rates will be much lower than in humid air.

Recent developments in stainless steels

Abstract: This article presents an overview of the developments in stainless steels made since the 1990s. Some of the new applications that involve the use of stainless steel are also introduced. A brief introduction to the various classes of stainless steels, their precipitate phases and the status quo of their production around the globe is given first. The advances in a variety of subject areas that have been made recently will then be presented. These recent advances include (1) new findings on the various precipitate phases (the new J phase, new orientation relationships, new phase diagram for the Fe–Cr system, etc.); (2) new suggestions for the prevention/mitigation of the different problems and new methods for their detection/measurement and (3) new techniques for surface/bulk property enhancement (such as laser shot peening, grain boundary engineering and grain refinement). Recent developments in topics like phase prediction, stacking fault energy, superplasticity, metadynamic recrystallisation and the calculation of mechanical properties are introduced, too. In the end of this article, several new applications that involve the use of stainless steels are presented. Some of these are the use of austenitic stainless steels for signature authentication (magnetic recording), the utilisation of the cryogenic magnetic transition of the sigma phase for hot spot detection (the Sigmaplugs), the new Pt-enhanced radiopaque stainless steel (PERSS) coronary stents and stainless steel stents that may be used for magnetic drug targeting. Besides recent developments in conventional stainless steels, those in the high-nitrogen, low-Ni (or Ni-free) varieties are also introduced. These recent developments include new methods for attaining very high nitrogen contents, new guidelines for alloy design, the merits/demerits associated with high nitrogen contents, etc.

Old materials with new tricks: multifunctional open-framework materials.

Abstract: The literature on open-framework materials has shown numerous examples of porous solids with additional structural, chemical, or physical properties. These materials show promise for applications ranging from sensing, catalysis and separation to multifunctional materials. This critical review provides an up-to-date survey to this new generation of multifunctional open-framework solids. For this, a detailed revision of the different examples so far reported will be presented, classified into five different sections: magnetic, chiral, conducting, optical, and labile open-frameworks for sensing applications. (413 references.)