David K. Aspinwall

Bio: David K. Aspinwall is an academic researcher from University of Birmingham. The author has contributed to research in topics: Machining & Surface integrity. The author has an hindex of 46, co-authored 108 publications receiving 6663 citations.

Review on ultrasonic machining

Abstract: Ultrasonic machining is of particular interest for the cutting of non-conductive, brittle workpiece materials such as engineering ceramics. Unlike other non-traditional processes such as laser beam, and electrical discharge machining, etc., ultrasonic machining does not thermally damage the workpiece or appear to introduce significant levels of residual stress, which is important for the survival of brittle materials in service. The fundamental principles of ultrasonic machining, the material removal mechanisms involved and the effect of operating parameters on material removal rate, tool wear rate and workpiece accuracy are reviewed, with particular emphasis on the machining of engineering ceramics. The problems of producing complex 3-D shapes in ceramics are outlined.

The effect of machined topography and integrity on fatigue life

Abstract: The paper reviews published data which address the effect of machining (conventional and non-conventional processes) and the resulting workpiece surface topography/integrity on fatigue performance, for a variety of workpiece materials. The effect of post-machining surface treatments, such as shot peening, are also detailed. The influence of amplitude height parameters (Ra, Rt), amplitude distribution (Rsk) and shape (Rku) parameters, as well as spatial (Std, Sal) and hybrid (Ssc) measures, are considered. There is some disagreement in the literature about the correlation between workpiece surface roughness and fatigue life. In most cases, it has been reported that lower roughness results in longer fatigue life, but that for roughness values in the range 2.5–5 μm Ra it is primarily dependent on workpiece residual stress and surface microstructure, rather than roughness. In the absence of residual stress, machined surface roughness in excess of 0.1 μm Ra has a strong influence on fatigue life. Temperatures above 400 °C reduce the effects of both residual stress and surface roughness on fatigue, due to stress relieving and the change in crack initiation from the surfaces to internal sites. The presence of inclusions an order of magnitude larger than the machined surface roughness generally overrides the effect of surface topography.

Turbomachinery component manufacture by application of electrochemical, electro-physical and photonic processes

Abstract: This paper presents an overview of the current technological and economical capabilities of electrochemical (ECM-based), electro-physical (EDM-based) and photonic (Laser-/EBM-based) additive and removal processes for turbomachinery component manufacture. Starting with the industrial demands and challenges of today, the technologies are reviewed in detail regarding achievable geometrical precision and surface integrity as well as material removal and deposition rates for conventionally difficult-to-cut Ti- and Ni-based alloys and dedicated steels. Past, existing and future areas of technology application of these advanced non-mechanical manufacturing processes are discussed. The paper focusses on the description of shaping processes therefore excludes pure welding or coating applications.

Drill geometry and operating effects when cutting small diameter holes in CFRP

Abstract: The paper details experimental results when drilling small holes (1.5 mm diameter cemented carbide drills with varying end point and helix geometry) in thin quasi-isotropic, unbacked carbon fibre reinforced plastic (CFRP) laminate (typical cutting time ∼0.4 s/hole). The study utilised an L12 Taguchi fractional factorial orthogonal array with analysis of variance (ANOVA) employed to evaluate the effect of drill geometry and drilling conditions on tool life and hole quality. Main effects plots and percentage contribution ratios (PCR) are detailed in respect of response variables and process control factors. More conventionally, tool wear and cutting force data are plotted/tabulated, together with micrographs of hole entry/exit condition and internal hole damage. Drill geometry and feed rate in general had the most effect on measured outputs. Thrust force was typically below 100 N at test cessation; however, drill wear progression effectively doubled the magnitude of force from test outset. Entry and exit delamination factors ( F d ) of ∼1.3 were achieved while the maximum number of drilled holes for a tool life criterion VB B max of ≤100 μm was 2900 holes using a stepped, uncoated drill with a feed rate of 0.2 mm/rev.

The Design and Analysis of Experiments

Abstract: THE DESIGN AND ANALYSIS OF EXPERIMENTS. By Oscar Kempthorne. New York, John Wiley and Sons, Inc., 1952. 631 pp. $8.50. This book by a teacher of statistics (as well as a consultant for \"experimenters\") is a comprehensive study of the philosophical background for the statistical design of experiment. It is necessary to have some facility with algebraic notation and manipulation to be able to use the volume intelligently. The problems are presented from the theoretical point of view, without such practical examples as would be helpful for those not acquainted with mathematics. The mathematical justification for the techniques is given. As a somewhat advanced treatment of the design and analysis of experiments, this volume will be interesting and helpful for many who approach statistics theoretically as well as practically. With emphasis on the \"why,\" and with description given broadly, the author relates the subject matter to the general theory of statistics and to the general problem of experimental inference. MARGARET J. ROBERTSON

State of the art electrical discharge machining (EDM)

Abstract: Electrical discharge machining (EDM) is a well-established machining option for manufacturing geometrically complex or hard material parts that are extremely difficult-to-machine by conventional machining processes. The non-contact machining technique has been continuously evolving from a mere tool and die making process to a micro-scale application machining alternative attracting a significant amount of research interests. In recent years, EDM researchers have explored a number of ways to improve the sparking efficiency including some unique experimental concepts that depart from the EDM traditional sparking phenomenon. Despite a range of different approaches, this new research shares the same objectives of achieving more efficient metal removal coupled with a reduction in tool wear and improved surface quality. This paper reviews the research work carried out from the inception to the development of die-sinking EDM within the past decade. It reports on the EDM research relating to improving performance measures, optimising the process variables, monitoring and control the sparking process, simplifying the electrode design and manufacture. A range of EDM applications are highlighted together with the development of hybrid machining processes. The final part of the paper discusses these developments and outlines the trends for future EDM research.

Design for additive manufacturing: trends, opportunities, considerations, and constraints

Abstract: The past few decades have seen substantial growth in Additive Manufacturing (AM) technologies. However, this growth has mainly been process-driven. The evolution of engineering design to take advantage of the possibilities afforded by AM and to manage the constraints associated with the technology has lagged behind. This paper presents the major opportunities, constraints, and economic considerations for Design for Additive Manufacturing. It explores issues related to design and redesign for direct and indirect AM production. It also highlights key industrial applications, outlines future challenges, and identifies promising directions for research and the exploitation of AM's full potential in industry.

Machining induced surface integrity in titanium and nickel alloys: A review

Abstract: Titanium and nickel alloys represent a significant metal portion of the aircraft structural and engine components. When these critical structural components in aerospace industry are manufactured with the objective to reach high reliability levels, surface integrity is one of the most relevant parameters used for evaluating the quality of finish machined surfaces. The residual stresses and surface alteration (white etch layer and depth of work hardening) induced by machining of titanium alloys and nickel-based alloys are very critical due to safety and sustainability concerns. This review paper provides an overview of machining induced surface integrity in titanium and nickel alloys. There are many different types of surface integrity problems reported in literature, and among these, residual stresses, white layer and work hardening layers, as well as microstructural alterations can be studied in order to improve surface qualities of end products. Many parameters affect the surface quality of workpieces, and cutting speed, feed rate, depth of cut, tool geometry and preparation, tool wear, and workpiece properties are among the most important ones worth to investigate. Experimental and empirical studies as well as analytical and Finite Element modeling based approaches are offered in order to better understand machining induced surface integrity. In the current state-of-the-art however, a comprehensive and systematic modeling approach based on the process physics and applicable to the industrial processes is still missing. It is concluded that further modeling studies are needed to create predictive physics-based models that is in good agreement with reliable experiments, while explaining the effects of many parameters, for machining of titanium alloys and nickel-based alloys.