scispace - formally typeset
Search or ask a question
Author

David Katz

Bio: David Katz is an academic researcher from Janssen Pharmaceutica. The author has contributed to research in topics: Milky Way & Stars. The author has an hindex of 19, co-authored 40 publications receiving 1971 citations. Previous affiliations of David Katz include Paris Diderot University & PSL Research University.
Topics: Milky Way, Stars, Radial velocity, Galaxy, Metallicity

Papers
More filters
Journal ArticleDOI
TL;DR: In this article, the authors analyzed a sample of solar neighborhood stars that have high-quality abundance determinations and showed that there are two distinct regimes of [α/Fe] versus age, which they identify as the epochs of the thick and thin disk formation.
Abstract: We analyze a sample of solar neighborhood stars that have high-quality abundance determinations and show that there are two distinct regimes of [α/Fe] versus age, which we identify as the epochs of the thick and thin disk formation. A tight correlation between metallicity and [α/Fe] versus age is clearly identifiable for thick disk stars, implying that this population formed from a well mixed interstellar medium, probably initially in starburst and then more quiescently, over a time scale of 4−5 Gyr. Thick disk stars have vertical velocity dispersions which correlate with age, with the youngest objects of this population having small scale heights similar to those of thin disk stars. A natural consequence of these two results is that a vertical metallicity gradient is expected in this population. We suggest that the youngest thick disk set the initial conditions from which the inner thin disk started to form about 8 Gyr ago, at [Fe/H] in the range of (−0.1, +0.1) dex and [α/Fe] ∼ 0.1 dex. This also provides an explanation for the apparent coincidence between the existence of a step in metallicity at 7−10 kpc in the thin disk and the confinement of the thick disk within R < 10 kpc. We suggest that the outer thin disk developed outside the influence of the thick disk, giving rise to a separate structure, but also that the high alphaenrichment of those regions may originate from a primordial pollution of the outer regions by the gas expelled from the forming thick disk. Metal-poor thin disk stars ([Fe/H] < −0.4 dex) in the solar vicinity, whose properties are best explained by them originating in the outer disk, are shown to be as old as the youngest thick disk (9−10 Gyr). This implies that the outer thin disk started to form while the thick disk was still forming stars in the inner parts of the Galaxy. Hence, while the overall inner (thick+thin) disk is comprised of two structures with different scale lengths and whose combination may give the impression of an inside-out formation process, the thin disk itself probably formed its first stars in its outskirts. Moreover, we point out that, given the tight age−metallicity and age–[α/Fe] relations that exist in the thick disk, an inside-out process would give rise to a radial gradient in metallicity and α-elements in this population, which is not observed. Finally, we argue that our results leave little room for radial migration (in the sense of churning) either to have contaminated the solar vicinity, or, on a larger scale, to have redistributed stars in significant proportion across the solar annulus.

511 citations

Journal ArticleDOI
TL;DR: In this paper, a hierarchical inversion algorithm was applied to the individual extinctions of stars in the Local Arm and surrounding regions to derive extinction toward stars that possess accurate photometry and relative uncertainties on DR2 parallaxes smaller than 20%.
Abstract: Gaia stellar measurements are currently revolutionizing our knowledge of the evolutionary history of the Milky Way. 3D maps of the interstellar dust provide complementary information and are a tool for a wide range of uses. We built 3D maps of the dust in the Local arm and surrounding regions. To do so, Gaia DR2 photometric data were combined with 2MASS measurements to derive extinction toward stars that possess accurate photometry and relative uncertainties on DR2 parallaxes smaller than 20%. We applied a new hierarchical inversion algorithm to the individual extinctions that is adapted to large datasets and to an inhomogeneous target distribution. Each step associates regularized Bayesian inversions in all radial directions and a subsequent inversion in 3D of all their results. Each inverted distribution serves as a prior for the subsequent step, and the spatial resolution is progressively increased. We present the resulting 3D distribution of the dust in a 6 × 6 × 0.8 kpc3 volume around the Sun. Its main features are found to be elongated along different directions that vary from below to above the mid-plane. The outer part of Carina-Sagittarius, mainly located above the mid-plane, the Local arm/Cygnus Rift around and above the mid-plane, and the fragmented Perseus arm are oriented close to the direction of circular motion. The spur of more than 2 kpc length (nicknamed the split ) that extends between the Local Arm and Carina-Sagittarius, the compact near side of Carina-Sagittarius, and the Cygnus Rift below the Plane are oriented along l ~40 to 55°. Dust density images in vertical planes reveal a wavy pattern in some regions and show that the solar neighborhood within ~500 pc remains atypical by its extent above and below the Plane. We show several comparisons with the locations of molecular clouds, HII regions, O stars, and masers. The link between the dust concentration and these tracers is markedly different from one region to the other.

227 citations

Journal ArticleDOI
TL;DR: In this article, the authors present several new sets of grids of model stellar atmospheres computed with modified versions of the ATLAS9 code, which are used for pulsation mode identification.
Abstract: Received ; accepted Abstract. We present several new sets of grids of model stellar atmospheres computed with modified versions of the ATLAS9 code. Each individual set consists of several grids of models with different metallicities ranging from (M/H) = 2.0 to +1.0 dex. The grids range from 4000 to 10000 K in Teff and from 2.0 to 5.0 dex in log g. The individual sets differ from each other and from previous ones essentially in the physics used for the treatment of the convective energy transport, in the higher vertical resolution of the atmospheres and in a finer grid in the (Teff, log g) plane. These improvements enable the computation of derivatives of color indices accurate enough for pulsation mode identification. In addition, we show that the chosen vertical resolution is necessary and sufficient for the purpose of stellar interior modelling.To explain the physical differences between the model grids we provide a description of the currently available modifications of ATLAS9 according to their treatment of convection. Our critical analysis of the dependence of the atmospheric structure and observable quantities on convection treatment, vertical resolution and metallicity reveals that spectroscopic and photometric observations are best represented when using an inefficient convection treatment. This conclusion holds whatever convection formulation investigated here is used, i.e. MLT(� = 0.5), CM and CGM are equivalent. We also find that changing the convection treatment can lead to a change in the effective temperature estimated from Stromgren color indices from 200 to 400 K.

172 citations

Journal ArticleDOI
TL;DR: In this paper, the authors report the first robust measurement of the Milky Way star formation history using the imprint left on chemical abundances of long-lived stars, suggesting a fundamental role of this component in the genesis of our Galaxy, something that had been largely unrecognized.
Abstract: We report the first robust measurement of the Milky Way star formation history using the imprint left on chemical abundances of long-lived stars. The formation of the Galactic thick disk occurs during an intense star formation phase between 9.0 (z ~ 1.5) and 12.5 Gyr (z ~ 4.5) ago and is followed by a dip (at z ~ 1.1) lasting about 1 Gyr. Our results imply that the thick disk is as massive as the Milky Way's thin disk, suggesting a fundamental role of this component in the genesis of our Galaxy, something that had been largely unrecognized. This new picture implies that huge quantities of gas necessary to feed the building of the thick disk must have been present at these epochs, in contradiction with the long-term infall assumed by chemical evolution models in the last two decades. These results allow us to fit the Milky Way within the emerging features of the evolution of disk galaxies in the early universe.

166 citations

Journal ArticleDOI
TL;DR: In this article, the authors report the first robust measurement of the Milky Way star formation history using the imprint left on chemical abundances of long-lived stars, which implies that the thick disc is as massive as the thin disc, suggesting a fundamental role of this component in the genesis of our Galaxy.
Abstract: We report the first robust measurement of the Milky Way star formation history using the imprint left on chemical abundances of long-lived stars. The formation of the Galactic thick disc occurs during an intense star formation phase between 9.0 (z~1.5) and 12.5 Gyr (z~4.5) ago and is followed by a dip (at z~1.1) lasting about 1 Gyr. Our results imply that the thick disc is as massive as the Milky Way's thin disc, suggesting a fundamental role of this component in the genesis of our Galaxy, something that had been largely unrecognized. This new picture implies that huge quantities of gas necessary to feed the building of the thick disc must have been present at these epochs, in contradiction with the long-term infall assumed by chemical evolution models in the last two decades. These results allow us to fit the Milky Way within the emerging features of the evolution of disc galaxies in the early Universe.

139 citations


Cited by
More filters
Journal ArticleDOI
TL;DR: Gaia as discussed by the authors is a cornerstone mission in the science programme of the European Space Agency (ESA). The spacecraft construction was approved in 2006, following a study in which the original interferometric concept was changed to a direct-imaging approach.
Abstract: Gaia is a cornerstone mission in the science programme of the EuropeanSpace Agency (ESA). The spacecraft construction was approved in 2006, following a study in which the original interferometric concept was changed to a direct-imaging approach. Both the spacecraft and the payload were built by European industry. The involvement of the scientific community focusses on data processing for which the international Gaia Data Processing and Analysis Consortium (DPAC) was selected in 2007. Gaia was launched on 19 December 2013 and arrived at its operating point, the second Lagrange point of the Sun-Earth-Moon system, a few weeks later. The commissioning of the spacecraft and payload was completed on 19 July 2014. The nominal five-year mission started with four weeks of special, ecliptic-pole scanning and subsequently transferred into full-sky scanning mode. We recall the scientific goals of Gaia and give a description of the as-built spacecraft that is currently (mid-2016) being operated to achieve these goals. We pay special attention to the payload module, the performance of which is closely related to the scientific performance of the mission. We provide a summary of the commissioning activities and findings, followed by a description of the routine operational mode. We summarise scientific performance estimates on the basis of in-orbit operations. Several intermediate Gaia data releases are planned and the data can be retrieved from the Gaia Archive, which is available through the Gaia home page.

5,164 citations

Journal ArticleDOI
TL;DR: The first Gaia data release, Gaia DR1 as mentioned in this paper, consists of the positions, parallaxes, and mean proper motions for about 2 million of the brightest stars in common with the Hipparcos and Tycho-2 catalogues.
Abstract: At about 1000 days after the launch of Gaia we present the first Gaia data release, Gaia DR1, consisting of astrometry and photometry for over 1 billion sources brighter than magnitude 20.7. We summarize Gaia DR1 and provide illustrations of the scientific quality of the data, followed by a discussion of the limitations due to the preliminary nature of this release. Gaia DR1 consists of: a primary astrometric data set which contains the positions, parallaxes, and mean proper motions for about 2 million of the brightest stars in common with the Hipparcos and Tycho-2 catalogues and a secondary astrometric data set containing the positions for an additional 1.1 billion sources. The second component is the photometric data set,consisting of mean G-band magnitudes for all sources. The G-band light curves and the characteristics of ~3000 Cepheid and RR Lyrae stars, observed at high cadence around the south ecliptic pole, form the third component. For the primary astrometric data set the typical uncertainty is about 0.3 mas for the positions and parallaxes, and about 1 mas/yr for the proper motions. A systematic component of ~0.3 mas should be added to the parallax uncertainties. For the subset of ~94000 Hipparcos stars in the primary data set, the proper motions are much more precise at about 0.06 mas/yr. For the secondary astrometric data set, the typical uncertainty of the positions is ~10 mas. The median uncertainties on the mean G-band magnitudes range from the mmag level to ~0.03 mag over the magnitude range 5 to 20.7. Gaia DR1 represents a major advance in the mapping of the heavens and the availability of basic stellar data that underpin observational astrophysics. Nevertheless, the very preliminary nature of this first Gaia data release does lead to a number of important limitations to the data quality which should be carefully considered before drawing conclusions from the data.

2,256 citations

Journal ArticleDOI
TL;DR: The first Gaia data release, Gaia DR1 as discussed by the authors, consists of three components: a primary astrometric data set which contains the positions, parallaxes, and mean proper motions for about 2 million of the brightest stars in common with the Hipparcos and Tycho-2 catalogues.
Abstract: Context. At about 1000 days after the launch of Gaia we present the first Gaia data release, Gaia DR1, consisting of astrometry and photometry for over 1 billion sources brighter than magnitude 20.7. Aims: A summary of Gaia DR1 is presented along with illustrations of the scientific quality of the data, followed by a discussion of the limitations due to the preliminary nature of this release. Methods: The raw data collected by Gaia during the first 14 months of the mission have been processed by the Gaia Data Processing and Analysis Consortium (DPAC) and turned into an astrometric and photometric catalogue. Results: Gaia DR1 consists of three components: a primary astrometric data set which contains the positions, parallaxes, and mean proper motions for about 2 million of the brightest stars in common with the Hipparcos and Tycho-2 catalogues - a realisation of the Tycho-Gaia Astrometric Solution (TGAS) - and a secondary astrometric data set containing the positions for an additional 1.1 billion sources. The second component is the photometric data set, consisting of mean G-band magnitudes for all sources. The G-band light curves and the characteristics of 3000 Cepheid and RR Lyrae stars, observed at high cadence around the south ecliptic pole, form the third component. For the primary astrometric data set the typical uncertainty is about 0.3 mas for the positions and parallaxes, and about 1 mas yr-1 for the proper motions. A systematic component of 0.3 mas should be added to the parallax uncertainties. For the subset of 94 000 Hipparcos stars in the primary data set, the proper motions are much more precise at about 0.06 mas yr-1. For the secondary astrometric data set, the typical uncertainty of the positions is 10 mas. The median uncertainties on the mean G-band magnitudes range from the mmag level to0.03 mag over the magnitude range 5 to 20.7. Conclusions: Gaia DR1 is an important milestone ahead of the next Gaia data release, which will feature five-parameter astrometry for all sources. Extensive validation shows that Gaia DR1 represents a major advance in the mapping of the heavens and the availability of basic stellar data that underpin observational astrophysics. Nevertheless, the very preliminary nature of this first Gaia data release does lead to a number of important limitations to the data quality which should be carefully considered before drawing conclusions from the data.

2,174 citations

Journal ArticleDOI
TL;DR: In this paper, the authors used the photometric parallax method to estimate the distances to ~48 million stars detected by the Sloan Digital Sky Survey (SDSS) and map their three-dimensional number density distribution in the Galaxy.
Abstract: Using the photometric parallax method we estimate the distances to ~48 million stars detected by the Sloan Digital Sky Survey (SDSS) and map their three-dimensional number density distribution in the Galaxy. The currently available data sample the distance range from 100 pc to 20 kpc and cover 6500 deg2 of sky, mostly at high Galactic latitudes (|b| > 25). These stellar number density maps allow an investigation of the Galactic structure with no a priori assumptions about the functional form of its components. The data show strong evidence for a Galaxy consisting of an oblate halo, a disk component, and a number of localized overdensities. The number density distribution of stars as traced by M dwarfs in the solar neighborhood (D < 2 kpc) is well fit by two exponential disks (the thin and thick disk) with scale heights and lengths, bias corrected for an assumed 35% binary fraction, of H1 = 300 pc and L1 = 2600 pc, and H2 = 900 pc and L2 = 3600 pc, and local thick-to-thin disk density normalization ρthick(R☉)/ρthin(R☉) = 12% . We use the stars near main-sequence turnoff to measure the shape of the Galactic halo. We find a strong preference for oblate halo models, with best-fit axis ratio c/a = 0.64, ρH ∝ r−2.8 power-law profile, and the local halo-to-thin disk normalization of 0.5%. Based on a series of Monte Carlo simulations, we estimate the errors of derived model parameters not to be larger than ~20% for the disk scales and ~10% for the density normalization, with largest contributions to error coming from the uncertainty in calibration of the photometric parallax relation and poorly constrained binary fraction. While generally consistent with the above model, the measured density distribution shows a number of statistically significant localized deviations. In addition to known features, such as the Monoceros stream, we detect two overdensities in the thick disk region at cylindrical galactocentric radii and heights (R,Z) ~ (6.5,1.5) kpc and (R,Z) ~ (9.5,0.8) kpc and a remarkable density enhancement in the halo covering over 1000 deg2 of sky toward the constellation of Virgo, at distances of ~6-20 kpc. Compared to counts in a region symmetric with respect to the l = 0° line and with the same Galactic latitude, the Virgo overdensity is responsible for a factor of 2 number density excess and may be a nearby tidal stream or a low-surface brightness dwarf galaxy merging with the Milky Way. The u − g color distribution of stars associated with it implies metallicity lower than that of thick disk stars and consistent with the halo metallicity distribution. After removal of the resolved overdensities, the remaining data are consistent with a smooth density distribution; we detect no evidence of further unresolved clumpy substructure at scales ranging from ~50 pc in the disk to ~1-2 kpc in the halo.

1,375 citations

Journal ArticleDOI
TL;DR: The SEGUE survey as mentioned in this paper obtained 240,000 moderate resolution (R = 1800) spectra from 3900 - 9000 Angstroms of fainter Milky Way stars (14.0 10 per resolution element, stellar atmospheric parameters are estimated, including metallicity, surface gravity, and effective temperature).
Abstract: The SEGUE survey obtained 240,000 moderate resolution (R = 1800) spectra from 3900 - 9000 Angstroms of fainter Milky Way stars (14.0 10 per resolution element, stellar atmospheric parameters are estimated, including metallicity, surface gravity, and effective temperature. SEGUE obtained 3500 square degrees of additional ugriz imaging (primarily at low Galactic latitudes) providing precise multi-color photometry (g,r,i = 2%), (u,z = 3%) and astrometry (0.1 arcsec) for spectroscopic target selection. The stellar spectra, imaging data, and derived parameter catalogs for this survey are publicly available as part of SDSS Data Release 7 (DR7).

1,183 citations